Top Gunsmithing Vise Jaws Reviews

Riverruns II Generation Rotary Fly Tying Vise Jaw Balanced Truly Extendable Right&Left Hand Fitting

  • Riverruns II Generation fly tying vise is a true extendable rotary action fly tying vise on the market! Any hook hold by the jaws is able to stay at....
  • Jaws set is truly extendable in both horizontal and vertical dimension to accommodating any large flies needed to work on. All vise are equipped both....
  • The jaws clamming system exerts a force of 10:1 ratio on the hook, a rock solid holding. The Jaws of the vise are easy to open and close. They are....
  • The bobbin cradle is very handy and versatile. It can be used as a parachute tool. Simply turn over the unit on the vise stem and then tighten the....
Check Stock

Yost Vises 34C Combination Vise | 6 Inch Jaw Width Heavy-Duty Utility Pipe and Bench Vise |Secure Grip with Swivel Base and Large Pipe Jaw Capacity | Made with Ductile Iron | Blue

  • COMBINATION VISE: The Yost Vises 34C 6-inch utility combination pipe and bench vise are made from 65,000 PSI Tensile Ductile Iron body parts. It has hardened, replaceable steel pipe jaws as well as hardened steel flat serrated jaws and continuous rolled thread on the main screw. The pipe jaws are set back to allow for the machinist's vise use..
  • TECHNICAL SPECS: Jaw Width 6" (15.24 cm), Jaw Opening 10" (25.4 cm), Throat Depth 7.5" (19.05 cm), Min Pipe Capacity 0.25" (0.635 cm), Max Pipe Capacity 6" (15.24 cm)..
  • SWIVEL BASE: Interlocking swivel base with 360-degree motion and 2 lockdowns..
  • HOW TO USE: Make sure vise is securely mounted to the workbench and the swivel base lock is secure. Open the vise by turning the vise handle counterclockwise. Place item between the serrated jaws. Close the vise by turning the vise handle clockwise until the item is snug in the serrated jaws, continue to tighten until you can no longer move item. Don't over tighten as this may damage item and or the vise. When finished working on the item, turn screw handle counterclockwise to release the item..
  • YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that ....
Check Stock

FRICTIONWORKS Made in USA 4' Professional Grade Soft Jaw Pads/ Covers for Bench Vise. N48 Grade Magnets. SH 60 Medium Firm Multi-Use Non-Scratch Polymer

  • MADE IN USA - The vise jaw redesigned from the ground up and built to a higher standard in the USA. Tight tolerances. Magnets stay in the jaws. Jaws stay on the vise. No slipping, moving, or falling off the vise.
  • HOLDS FIRMLY TO THE VISE: 8 N48 spec rare earth magnets - 7 lbs of force each. The only jaws with listed specs and the magnet strength you need to keep the jaws solidly on the vise.
  • UNIQUE MAGNET RETENTION SYSTEM - Magnets secured with stainless nuts and screws to a proprietary internal bracket overmolded into the jaws, solving what is likely the biggest failure point of all bench vise soft jaws.
  • ENHANCED MATERIAL - Our proprietary reinforced polymer composite, shore hardness 60-D, with textured face Is incredibly tough yet softer and grippier than nylon while maintaining more rigidity and toughness than TPU. For high-torque applications see or SH80 jaws..
  • THICKER WALLS – with our custom polyurethane provide more uniform compression than other materials reducing slippage, vise slop and racking.
  • PROTECTIVE SURFACE – Specially textured surface won't mar, scratch or discolor. Tested on cerakote, chrome, aluminum, wood, plastic, painted surfaces, and more.
  • TIGHT TOLERANCES - true flat surfaces, angles, and dimensions reduces wobble and improves fi....
Check Stock

Wheeler Firearms Accurizing Torque Wrench and Tipton Best Gun Vise for Cleaning, Gunsmithing and Gun Maintenance

  • INCLUDES: Wheeler FAT Wrench & Tipton Gun Vise 10 bits (hex to square adapter, #10 flat blade, #32 flat blade, #11 flat blade, 5/32 hex, 7/64 hex, 3/32 hex, T20 torx, T15 torx & Leupold specialty flat blade), ¼” socket & a convenient plastic storage case.
  • EASE OF USE: Gun Vise features L-shape center support holds break-open guns securely and separate quick-release cam blocks move independently to accommodate any stock shape, FAT Wrench allows for application of repeatable, accurate torque settings.
  • VERSATILITY: Vise is easily configurable to handle bolt-action rifles, break-open shotguns, extendable magazine rifles and handguns and every component adjusts to accommodate different firearms and projects.
  • ACCURACY: Torque Wrench +/- 2 in/lbs up to 40 in/lbs.
  • 40 – 65 is +/- 5%, the Tipton Vise makes it easy to work on your firearms and reach precise specifications during gunsmithing or scope mounting.
  • DURABLE: Bits are made of S2 tool steel and hardened to 56-58 Rockwell “C”, the Vise is made from non-marring, solvent-resistant polymer to stand up to years of hard use for gun maintenance and gunsmithing.
Check Stock

VISE TEK Gun Vise Gun Holder Rifle Vise Heavy-Duty Gun Vise for Sighting in and Cleaning Gunsmithing and Maintenance

  • ADJUSTABLE AND COMPATIABLE -All parts of the gun vise, including gun clamps, chassis, accessory trays, and 4 leveling feet are independently adjustable and moveable, to meet the diversified demands of cleaning, sighting, gunsmithing and maintenance. Applicable to various guns, rifles and bows..
  • OPTIMAL BALANCE AND STABILITY- The Jagged edge and the embedded design enhanced the bearing capacity of the vise support, making the gun vice more stable and durable while supporting your firearms. The gun vise for sighting in scope provide you with the optimal balance and stability..
  • NON-DESTRUCTIVE DESIGN- The rubber-wrapped contact pads of the rifle vise is non-destructive design, which protects your gun without damage. Made of heavy-duty material, the gun stand is quality and durable..
  • CONVENIENT STORAGE-Two detachable accessory trays of the gunsmithing vise are prepared for the required gun cleaning tools. And the bottom support rods are detachable,making it more convenient for storage..
  • PURCHASE WITH CONFIDENCE- 2-year warranty is provided for the cleaning stand. Any questions, feel free to reach out to us. The professional customer service will solve the problem within 6 hours..
Check Stock

Milescraft 4017 ClampAnchors - Bench Clamp Base Set

  • Data:Net weight 3.7 lbs, Maximum width of jaw opening 3.0 inch, Jaw width 2.75 inch.
  • Wide range of applications: V60 vise is ideal for small parts such as home, jewelry, hobbies, model making, electronics, etc., providing clamping for light applications. Round, square and other shaped part can be processed.
  • Flexible use: Rotate the control handle to rotate the vise body to the desired position, and move the rotary control handle to firmly fix the vise body. The vise body can be rotated 360° on its base, even if you are used to the left hand, there will be no hindrance. It is very convenient to disassemble and install.
  • Durable: The jaws are quenched and normalized to increase the hardness and toughness of the jaws and are durable.
  • Non-slip design: The anti-slip texture on the inner side of the jaws increases the clamping force of the jaws, and does not slip.
  • it lays a good foundation for your smooth completion..
Check Stock

Yost Vises LDPV-6 Drill Press Vise | 6 Inch Jaw Width Portable Vise | Blue

  • DRILL PRESS VISE: Yost Vises LDPV-6 6-inch Drill Press Vise is crafted from cast iron. Durably light-weight and portable with texture jaws..
  • TECHNICAL SPECS: Jaw Width 6” (15.24 cm), Jaw Opening 5.75" (14.605 cm), Throat Depth 1" (2.54 cm), Slot Width: 0.6" (1.52 cm), Slot centerline: 7.15" (18.16 cm)..
  • HOW TO USE: Make sure vise is securely mounted to the workbench and the swivel base lock is secure. Open the vise by turning the vise handle counterclockwise. Place item between the serrated jaws. Close the vise by turning the vise handle clockwise until the item is snug in the serrated jaws, continue to tighten until you can no longer move item. Don't over tighten as this may damage item and or the vise. When finished working on the item, turn screw handle counterclockwise to release the item..
  • YOST VISES QUALITY: Every Yost Vises tool is engineered to have high standards of quality, strength, and durability. We value quality over quantity and manufacture products that are safe and easy to use. We offer lifetime tech support to back our quality guarantee..
  • SAFETY INFORMATION: Misuse of vises can cause serious injury to eyes, hands and or other body parts. Vises must be set up and used properly. Before setup and use, read, understand, and follow all ins....
Check Stock

6-Inch Cross-Slide Drill Press Vise X-Y Compound Vise 2 Way Heavy Duty Cross Slide Vise Clamp Machine Metal Milling

  • Material - This X-Y compound vise made of heavy duty cast iron construction, Powerful serrated steel jaws.
  • Size - 6" wide machinist jaws ,Maximum jaws opening: 5.9" , Jaw depth 2.08 inch.
  • Vice Travel X: 5.5inch Vice Travel Y: 7.48inch.cold rolled steel....
  • Usage - uyoyous cross slide vise have swivel crank handles for adjusting vise front to back and left to right, bolt down slots for securing..
  • Function - Hinged vise crank handles drops out of the way, designed for woodworking and metalworking..
  • Wide Application - our heavy duty cross slide vise designed for woodworking and metalworking, widely used in milling machine, drill press and....
Check Stock

SWANLAKE 4.5 Inch Vise Jaw Pads Covers Protectors 1 Multi-Grooved & 1 Standard Set

  • These soft jaws for bench vise are made of Thermoplastic polyurethane rubber which is sturdy enough to hold your workpiece firmly in place and protect it from your metal bench vise..
  • Each vise pad set has 4 strong, rare earth magnets to ensure that they will stay firmly in place once attached to your table vise..
  • This 2 pack set with both standard & multi-groove jaw pads 4.5″ will work with a 4 inch to 5 inch bench vise..
  • This vise jaw covers feature groove sizes: 90 Degree angles: 1/16″, 1/8″, 1/4″, 3/4″. 60 Degree angle: 13/32″..
  • These vise jaws are ideal for woodworking, jewelry making, and more delicate type work..
Check Stock

Vise Universal Rotate 360° Work Clamp-on Vise Table Vise 3

  • Data:Net weight 3.7 lbs, Maximum width of jaw opening 3.0 inch, Jaw width 2.75 inch.
  • Wide range of applications: V60 vise is ideal for small parts such as home, jewelry, hobbies, model making, electronics, etc., providing clamping for....
  • Flexible use: Rotate the control handle to rotate the vise body to the desired position, and move the rotary control handle to firmly fix the vise....
  • Durable: The jaws are quenched and normalized to increase the hardness and toughness of the jaws and are durable.
  • Non-slip design: The anti-slip texture on the inner side of the jaws increases the clamping force of the jaws, and does not slip.
Check Stock

Fasmov Swivel 3\ Universal Table Vise Tilts Rotate 360° Universal Work

  • The Table Vise will not deform even under high pressure, the vise is made of cast aluminum, the jaws are made of hardened high-carbon steel alloy, and the movable parts are made of precision milled heat-treated chromium plate carbon steel..
  • Jaws are 3" x 3/4" / 79mm x 17mm with a 2" / 51mm opening, the clip has a wide enough opening for any workbench or table..
  • Adjustable and rotates to any possible angle, rubber Jaws for no scratch and firm clamping, enabling you to lock the workpiece in any position..
  • Rubber on the jaws can be removed to reveal a cross pattern for use on wire/rods, The overall design of pliers has laid a good foundation for the smooth completion of your work..
  • Lightweight, small vise, easy operation, Ideal for holding small parts in Jewelry, Hobby, Model making, Electronics and more..
Check Stock

VENTURES FLY CO. | Rotary Fly Tying Vise with Pedestal Base for Fly Fishing Kit | Tool for Tying/Making Flies with Materials: Marabou, Tungsten Beads, Hook, Feathers, Hackle, Using Bobbin & Scissors

  • ✔ TRUE 360° ROTATION - The Flysmith fly tying vise rotates 360° around a single axis point. Allowing you to wrap materials around the hook with greater accuracy and efficiency. So you can eliminate tiresome hand-over-hand wrapping. Dual Adjustability Knobs allow you to change the tension of the rotation. From rock solid to near frictionless. Large Crank Handle allows for a firm grip when using the fly tying vise's rotary function..
  • ✔ DURABLE & VERSATILE JAWS - Your vise only has one job – and it better do it well...holding the hook! The jaws on the Flysmith are made of a fine, hardened steel with anti-corrosive properties. Your jaws will last for life or we'll replace them under our lifetime warranty. The jaw is adjustable to accomodate a wide range of hooks size 28 - 4/0. Lastly, the vise has a smoothly balanced tension lever to add the perfect amount of tension to tightly hold the hook without slipping..
  • ✔ LARGE PEDESTAL BASE - Vise sits on a large, heavy pedestal base. To securely hold your vise in place – without movement. Two cutouts easily store hooks and beads when tying. The vise is protected by a special protective coating tha....
Check Stock

Kreg KBCBA Bench Clamp Base

  • Data: Maximum open jaws 3 inches, net weight 3 pounds..
  • Widely used: Aluminum vise clamps can be tilted and rotated 360°, and do not need to be punched to install on the edge of a 2.4-inch thick table. It is an ideal choice for some industries, such as jewelry lovers, craftsmen, model making , Electronic products and others..
  • High-grade materials: The vise will not deform even under high pressure, because the vise is made of cast aluminum, the jaws are made of hardened high-carbon steel alloy, and the movable parts are made of precision milled heat-treated chromium plate carbon steel. To provide reliability and corrosion resistance..
  • Anti-skid design: the anti-skid texture on the inside of the jaws increases the clamping force of the jaws without sliding.
  • Rubber covers will protect your product from injury. The overall design of pliers has laid a good foundation for the smooth completion of your work..
  • Gifts: a adapter that can be used as an electric drill bracket and a hexagon wrench..
Check Stock