Top Ground Clamp Connector Reviews

WeldingCity 100-ft 2-AWG USA-made Heavy Duty Welding Cable Highly Flexible Durable EPDM Rubber Jacket 600V -50C-105C Black

... for use where maximum flexibility and resistance to cuts, tears, abrasion is required. Max volt 600V, -50C to 105C. Resistant to chemicals, oils, and acids and is also weather, ozone and sunlight resistant. Available welding cable sets: welding cable only.
cable set with terminal lugs and cable set with Dinse connectors..
Welding Cable Set With Terminal Lug includes: 2-AWG USA-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp and three zinc-plated copper terminal lugs (1/2" stud hole)..
Welding Cable Set With Dinse Plug includes: 2-AWG USA-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp, one zinc-plated copper terminal lug (1/2" stud hole) and two Dinse-type 35-50mm male connectors..
Heavy duty 300-amp stick electrode holder with strong jaw spring.
both upper and lower jaws made of copper (brass) with increased operator comfort. Zinc-plated steel 300-amp work clamp with strong spring, copper plated jaw, copper braid, copper plated hex screw for secured cable connection. Dinse-type twist-lock cable connector (male) with heat and oil resistant covers and accessories.
1/2" (12.7mm) pin. Accepts cables AWG #2-1/0 ....

Check Stock

Zinc and Aluminum Male and Female Coupling, Fits All 5/8-Inch and 3/4-Inch Garden Hose Repair Fitting, 2 Pack (Male + Female)

End Female Hose Connector,Male Hose Connector/Replacement/Mender For 5/8 inch or 3/4 inch hoses.
Aluminum Male and Female Coupling, Zinc clamp and stainless steel screws.
Easy to use and reliable,Work perfectly with any standard garden hose.
Made with precision process, no leaking and durable, reusable and easy to install.
Package include:1 pack female thread end hose repair connector with zinc clamp, 1 pack male thread end hose repair connector with zinc clamp.

Check Stock

ETCR2100A+ Digital Clamp Ground Earth Resistance Tester Meter 0.01Ω-200Ω

Clamp Size:Φ1.26"(32mm),Clamp table size: 10.24"×3.54"×2.6"(260mm × 90mm × 66mm).
Structural Feature：Clamp CT,and can measure the ground fault which can not be measured by traditional method.
Measuring ground system with loop, there is no need to disconnect the ground wire without auxiliary electrode, which means safer and faster.
Multi keyboard operation panel, new alarm and save functions.
This Clamp meter widely applied in ground resistance measurement, loop resistance measurement in fields such as electric power, telecommunications, meteorology, oil field, architecture and industrial electrical equipment, etc.

Check Stock

Feelers 1/2" Garden Soaker Hose 15 Ft with Soaker Hose Fittings, Round Rubber Garden Drip Hose 70% Saving Hose for Garden Beds,Lawn and Plants

...aterial, which optimizes the pressure resistance of the hose and makes it difficult for the hose to burst. Its operating pressures range from 30psi to 60psi, with an inside diameter of 1/2"(12mm) and an outside diameter of 5/8"(16mm). Water can slowly seep out of the hose to provide the plants with proper moisture..
Connector: The soaker hose comes with a 3/4" NPT threaded connector. The gasket inside the connector adds many small holes to reduce the water pressure and prevent the connector from leaking water. In addition, the clamp we are equipped with can be used to replace the brass ring and prolong the service life of the hose..
Water saving: The hose is arranged along the direction of the plant, and the water slowly exudes from the pipe wall, extending the time that the water stays at the root of the plant. This reduces over irrigation and saves up to 70% of water..
Versatile usage: The soaker hose connector can be connected to other hoses, and it can be above ground or buried underground. Suitable for lawn, garden, flower bed and other places, especially for fine irrigation of rows of plants..
Package included: 1/2" x 15ft(4.5m) soaker hose, clamps x2, 3/4" male x1, 3/4" female x1,coupling x2, elbow x2, Tee x2, gasket x2, plug x2..

Check Stock

Plasma Cutter Machine,MYYWELD Dual Voltage 110/220V 50A，Portable Air Plasma Cutting Equipment Max Cutting Thickness 15mm,IGBT Inverter 1/2\ Clean Cut, High Frequency Cutting

...ed for automotive, ducting work, repair/maintenance, metal processing, manufacture..
Accessories-User guide, 1pcs PT31 cutting gun(5M), 1pcs ground clamp(2M), 1pcs transparent hose(3M), 1pcs conversion line, 4pcs hose clamp, 2pcs electrode, 2pcs copper nozzle, 1pcs pressure value, 1pcs pressure reducing value outlet connector, 1pcs pressure reducing value inlet connector..

Check Stock

Fowler 52-475-050-0, All-Angle V-Block and Clamp with 1.3125\ Capacity

Angle Clamp: The sides of this clamp set are parallel while the V is central and ground with a central hole provided for drilling or removing pins.
Machinist Tool: V-block set has four 3/8"-16 tapped holes, two in the bottom and one on each side for angle non-clamping.
Durable Construction: Made of hardened and precision ground tool steel, this angle V-block is perfect for grinding, milling, or drilling.
Dimensions: This V-clamp is 3-5/8" long, 1-7/8" wide, and 1-7/8" high (including clamp) with a holding capacity of 1-5/16".
High Accuracy: Sides are parallel and V is central and ground to .0003".

Check Stock

WYNNsky Magnetic Welding Support Ground Clamp, 2pcs Set, Single and Double Welding Head, Copper Tail

Design: This magnetic clamp attaches easily to any smooth metal surface, flat or curved. It holds on tightly, without budging easily. Super suction magnet at the bottom, large suction power, long-lasting magnetism..
Application: This device serves as the ground point, which you can take with you anywhere. Simply tack this onto a convenient spot, hook up your safety wire and you're ready to weld..
Material: The welding magnet head adopts high quality material, durable and solid. Has brass tail has good welding stability, durable, anti-rust, has good performance and long service life..
Advantage: This magnetic clamp is handy to have in such situations. You can stick in on a car body and not have to damage the paint. The clamp can also be attached to metal poles, struts, railings or the welding table..
Including 1pc Single Head Magnetic Welding Ground Clamp.
1pc Double Head Magnetic Welding Ground Clamp.
1pc Copper Tail Welding Stability Clamps..

Check Stock

200A Magnetic Welding Ground Clamp, 200A On/off Adjustable Magnetic Welding Ground Clamp Rare Earth Switchable Magnet Welding Holder,Grounding Magnet Connector

Magnetic Welding Ground Clamp: Made of high quality iron, durable in use. High strength and hardness. Fast set up and grounds instantly. Applicable to clamp both flat and round workpieces..
200A Magnetic Ground Clamp: Magnet Strength Pull Force 30 kg, Simple to connect, ground wire of welding machine. Simply place on clean surface and turn on then start welding. Stays clean because magnetic field turns completely off..
Easy to Use: Strong grip on flat or round iron surfaces. The on/off control makes the metal dust fall off without cleaning, which is convenient and simple to use..
Package Included:1 x Welding Ground Clamp.
Warm Tips: Make sure that the grounding device is in the off state when it is not in contactwith the ferromagnetic material. It can be freely controlled to open and close. When the ferromagnetic material is opened and connected, it will produce sudden and powerful suction. Do not use welding grounding to lift or transport materials..

Check Stock

BAYTORY Upgrade Magnetic Welding Support Ground Clamp Tools, Welding Magnet Head Strong Magnetism Large Suction, Copper Tail Welding Accessories Stability Clamps

Check out this handy Fix-tite Magnetic Welding Ground Clamp. A device that speeds up grounding chores for welders..
NO-HASSLE SAFETY SETUP - You no longer have to waste your time finding, placing or removing a ground point for a welding job. This device serves as the ground point, which you can take with you anywhere. Simply tack this onto a convenient spot, hook up your safety wire and you're ready to weld..
STRONG MAGNETIC GRIP - This magnetic clamp attaches easily to any smooth metal surface, flat or curved. It holds on tightly, without budging easily. Now that you've got this, you won't have to take minutes searching for a good ground or attaching grounding tabs..
OFFERS CONVENIENCE - Sometimes you're faced with a welding job that has limited options for ground points. You don't want to have to damage a car's paint job simply to affix a safety line. This magnetic clamp is handy to have in such situations. You can stick in on a car body and not have to damage the paint. The clamp can also be attached to metal poles, struts, railings or the welding table..
Material: Copper / insulation board. Durable and solid.With copper tail with good welding stability..

Check Stock

PLG Heavy Dutty Garden Hose Repair Fittings Male Hose End Water Hose Connector/Replacement/Mender for All 3/4-inch or 5/8-inch Garden Hose

Heavy Duty ,Fit 5/8 inch or 3/4 inch Garden Hoses,durable, reusable and easy to install.
Broken and Leaking Garden Hose Repair: Save the cost of a new hose with the hose menders and couplings. They are leakproof, rustproof, unbreakable, reusabole and easy to use..
Easy to Install Hose Fittings:Step 1: Examine Hose and Cut.Step 2: Put the Hose Clamp On.Step 3: Insert New End and Clamp.Step 4: Using a screwdriver, attach the clamp that came with the hose repair kit securely around the end of the garden hose..
Water hose connector:Connect garden hose to your hose nozzle,sprinkler,Y hose connector,outdoor faucet,hose to hose connector,faucet to garden hose adapter,water sprayer..

Check Stock

hynade Brass T-Style Welding Ground Clamp 300-Amp Wide Jaw Clamp Tool

Ground clamp size :7 inches long, 1.18 inches max chin opening.
The welding ground clamp adopt high-quality brass material, sturdy structure, strong grip, multifunctional wide-jaw grounding clamp.
The clamp tool suitable for most grounding situations, specially designed for heavy-duty high-current welding applications/MIG/MMA/TIG/plasma welding/cutting machines.
Large contact surface area provides good cable connection and positive grounding.
If have any questions, please contact us and we will provide you with 100% satisfactory service.

Check Stock

2-pin 8 mm LED Connector kit LED3528 Connector L-Shaped Connector 2 Needle Angle Connector T-Shaped Connector weldable Seamless Connector Jumper Connector (8 mm)

LED connector kits apply to 2835 3528 2-pin 8 mm LED lamp strip. Not suitable for 10 mm connectors.
2 needles 8 mm LED connector support 0-4A current and 0-24V voltage input, heat resistance level is -20 to 100 degrees.
Note: When the waterproof LED is connected to the LED lamp strip, the silica gel on the surface of the weld region must be peeled off..
Easy to install. Connect the positive and negative poles of the connector. Simply insert the lamp bar into the connector and clamp the cover. No soldering and other processes.
It is easy to install, according to the positive and negative connections of the connector, simply insert the lamp bar into the connector and clamp the cover. No soldering and other processes..

Check Stock

Lukovee Aquarium Gravel Cleaner, Fish Tank Vacuum Cleaner Kit Tool With 2 Extendable Pipe, Glass Scraper, Water Flow Controller Clamp, (Aquarium Gravel Cleaner With Fish Net)

... turtle aquarium tanks height less than 36in/92cm..
➤ 【Simple Assembly, Easy Operation】 --- It’s easy to install and use. ①Connect the inlet pipe.②Insert the 6ft flexible outlet hose with water flow clamp on the other side and attach it on the bucket to prevent water from splashing. ③Spin on the orange connector to install the extension tube tightly. ④Keep pressing the air-pressing button until the water automatically flows out. ⑤Fix the controller clamp to adjust water flow..
➤ 【Prevent Clogging】 --- The aquarium gravel filter cleaner can replace the water and keep it fresh. With filter basket in the tube which can avoid clogging by gravel, it’s helpful to effectively separate and remove debris in the aquarium..

Check Stock