Top Grip Range 3 313 3 437 Reviews

MaximalPower Replacement Vacuum Filter for Eureka DCF-10 DCF-14 Lightweight Upright Vacuum Cleaner Pleated Hepa

  • New MaximalPowerTM brand vacuum filter. Washable & Reusable.
  • quality guaranteed.100% Compatible with original manufacturer equipments..
  • great for allergy sufferers. Traps Microscopic Particles & Allergens..
  • Works in the following vacuums:Eureka Lightweight Upright Vacuums: Style Model Numbers Optima 430 series, including 430, 431a, 431ax, 431axz, 431b, 431bx, 431f, 433a, 433b, 433be, 433bet, 437, 437axz, 437az, 439az, 437AZ, 437AZE, 437-AXZ, 437-AZ, 437-AZE, 431A, 431AE, 431AXZE, UK431A Optima Pet Lover 439AZ.
  • Replaces the following OEM Part #s: 62396, 62396-1, 62396-12, 73734-2, 73734, 2316911737, 023169117372, 73824, 62731, 62731A, 62731B, DCF-10, DCF-14, DCF10, DCF14, 62731-1, 62731-12, 470953, 62731A-2, 62417, 62731B-Z, and many more..
  • HEPA filtration systems trap and seal-in 100% of dust mites, pollens, ragweed, mold spurs, microscopic particles, bacteria, dust mites, germs as small as 0.1 micron and other allergy causing agents.
Check Stock

Analog Panel Mt Thermometer, 100 to 350F

  • 003cb003ePrice For:003c/b003e Each 003cb003eDial Size003c/b003e: 3-1/2" 003cb003eSensing Medium003c/b003e: Vapor Actuated 003cb003eTube Length003c/b003e: 120" 003cb003eSensor Material003c/b003e: Copper 003cb003eTube Material003c/b003e: Bronze Braided Copper 003cb003eItem003c/b003e: Analog Panel Mount Thermometer 003cb003eMounting003c/b003e: Surface with Bottom Outlet 003cb003eSensor Length003c/b003e: 1.87" 003cb003eTemp. Range (F)003c/b003e: 100 Degrees to 350 Degrees 003cb003eSensor Dia.003c/b003e: 0.437" 003cb003eTemp. Range (C)003c/b003e: 37 Degrees to 176 Degrees 003cb003eLens Material003c/b003e: Polycarbonate.
  • 003cb003eAccuracy003c/b003e: +/-1 Scale Division 003cb003eCase Material003c/b003e: Stainless Steel 003cb003eSensor Connection003c/b003e: 1/2" NPT 003cb003eCountry of Origin (subject to change)003c/b003e: China.
Check Stock

Fette Filter - Vacuum Filter Compatible with Eureka Models DCF10, DCF-10, DCF14, DCF-14, Optima 430 Series & Optima Pet Lover Compare to Part # 62396-2, 62396, 62731. Pack of 4

  • Compatible with 62396, 62396-1, 62396-12, 73734-2, 73734, 2316911737, 023169117372, 73824, 62731, 62731A, 62731B, DCF-10, DCF-14, DCF10, DCF14, 62731-1, 62731-12, 470953, 62731A-2, 62417, 62731B-Z,.
  • Compatible with Eureka Optima 430 series including 430, 431a, 431ax, 431axz, 431b, 431bx, 431f, 433a, 433b, 433be, 433bet, 437, 437axz, 437az, 439az, 437AZ, 437AZE, 437-AXZ, 437-AZ, 437-AZE, 431A, 431AE, 431AXZE, UK431A.
  • Compatible with Eureka Models DCF10, DCF-10, DCF14, DCF-14..
  • Contains 4 Replacement Filters Washable and Reusable Make Sure to Completely Dry Before Re-using.
  • Premium Quality Fette Filter Brand Product 100% Money Back Guarantee!.
Check Stock

EZ SPARES 2Pcs Eureka DCF-10 & DCF-14 Filter Hepa Fits Optima Series Replacement Attachment Compatible Part # 62731 & 62396

  • 2 Eureka DCF-10 & DCF-14 Dirt Cup Filters.
  • Easy to install so you can get back to cleaning as soon as possible! Simply remove your old filter and put this brand new one in it’s place! Compare to Eureka Part Nos. 62731, 62396..
  • Fits Eureka Optima Vacuum Cleaner Models: 437AZ, 437AZE, 437AXZ, 437-AXZ, 437-AZ, 437-AZE, 431A, 431AE, 431AX, 431AXZ, 431AXZE, UK431A.
  • Washable & Reusable. Essential For Allergy Sufferers.
Check Stock

Interstate Pneumatics H8-KIT Heavy-Duty Bench Crimper (H8) with Ferrules (50pk) 0.625' ID x 1' & 0.656' ID x 1'

  • Made of ductile cast iron and heat-treated steel dies | Extra thick die carriage and a thicker hinge point for extra strength | Dies are compatible with dies available from other brands.
  • Comes with five dies for crimping | Die Sizes: 0.48", 0.52", 0.58", 0.62", 0.67".
  • 1/4" One Braid, 5/16" One Braid, 5/16" Two Braid, 3/8" One Braid & 3/8" Two Braid PVC & Rubber Hoses can be crimped with this crimper | Mounting Holes for permanent benchtop installation.
  • F7327: Length: 1.0 Inch | I.D: 0.625 Inch | Hole: 0.437 Inch | Wall Thickness: 0.025 Inch | Material: C46500 Brass | 50 per Pack.
  • F7328: Length: 1.0 Inch | I.D: 0.656 Inch | Hole: 0.437 Inch | Wall Thickness: 0.025 Inch | Material: C46500 Brass | 50 per Pack.
Check Stock

Dog Training Collar with Remote 3/4 Mile, Long Battery Life up to 185 Days, Dog Shock Collar with 3 Safe Training Modes, Flashlight, IPX7 Waterproof for All Breeds, Sizes

  • ...ining Modes (beep, 0-9 vibration, 0-30 shock mode). Dog shock collar can effectively and scientifically assist you in training your dog. The remote's flashlight (can be turned on when off) help you find your dog quickly in dark environments..
  • 【Up to 3/4 Mile Control Range】Compared with other remote control ranges of only 1000-2000FT, KAIYIKAPET upgraded dog trainer can reach 3937FT/1312Yard, and the obstacle range is 1312FT/437Yard. Super two-way transmission signal, don't worry about losing the signal..
  • 【IPX7 Waterproof & Dustproof】Our dog training collar waterproof training collar allows dogs to play freely. Wear it without worrying about wading, not afraid of mud to meet the needs of multi-scene training, giving you the maximum flexibility in outdoor activities without damaging the receiver..
  • 【Fits Most Sizes of Dogs】E Collar Adjustable Range: 4.0-7.1 inches in diameter, suitable for dogs with a neck circumference of 11.8-21.6 inches. Stronger collar, suitable for dogs of all sizes (10-130lbs), meeting the different needs of large, medium and small dogs without burdening them..
Check Stock

3D Printer Filament - 1KG(2.2lb) 1.75mm / 3 mm, Dimensional Accuracy PLA Multiple Color (Transparent,3mm)

  • 1 KG (approximately 2.20 lbs) Spool / 1.75mm Filament Diameter about 350m / 3.00mmFilament Diameter about 115m (Dimensional Accuracy +/- 0.05mm) / A wide range of colors available..
  • Recommended Extrusion/Nozzle Temp: 230°C - 250°C (401° F~ 437° F)..
  • PLA Filament Features: Minimal warping/ No heating bed required/ Little to no odor, a most commonly used thermoplastic material for 3D printing..
  • Widely Application: Inland PLA Filament is compatible with the majority of 3D printers, perfect for prototypes, desk toys, low-stress applications and other consumer productsDimensions: 155 x 155 x 85mm Inner Diameter: 55mm..
  • Premium Quality: Inland PLA 3D Printer Filament undergoes numerous testing procedures, 100% satisfaction guarantee provided..
Check Stock

DOTOOL HVLP Touch Up Air Spray Gun with 0.8mm Stainless Steel Nozzle Composite Paint Sprayer Spot Repair Set up for Auto Paint Primer Topcoat Panel Repairs, Door jambs, Difficult-to-Reach Areas, 125cc

  • 【Spray Gun Filter】High quality stainless steel filter, size: 10cm/3.94 “, corrosion resistant, compression resistant, uniform mesh, no broken hole, no twisted wire, universal..
  • 【Easy to Install】First, use the nozzle to seal the nozzle into the protective seat, then insert the nozzle into the protective seat and rotate to complete the installation, time saving and labor saving for your project..
  • 【Airless Sprayer Tips】These paint sprayer tips are compatible with most airless paint sprayers, and 211, 313, 415, 517, 623 correspond to the nozzle diameters of 0.009 inches, 0.011 inches, 0.015 inches, 0.017 inches, 0.021 inches, and the spray range is 4 to 14 inches..
  • 【Widely Application】Suitable for most mainstream airless sprayers guns, suitable for painting, furniture, fences, home decor, industrial fine painting and decoration, etc..
  • 【Package Includes】5 Pieces airless sprayer tips and tip seal in 5 sizes(211, 313, 415, 517, 623), 5 pieces spray gun filter replace for airless spray paint machine. Sufficient quantity and different sizes to meet your different needs..
Check Stock

JR Products 12245 Black Triple SPST On-Off Switch with Bezel

  • SPST, 16 Amp @ 125-250 VAC, 3/4 H.P. @ 125-250 VAC, 10 Amp @ 14 V (T), 3 Amp @ 125V(L).
Check Stock

3D Printer Filament - 1KG(2.2lb) 1.75mm / 3 mm, Dimensional Accuracy PLA Multiple Color (Luminous Blue,3mm)

  • 1 KG (approximately 2.20 lbs) Spool / 1.75mm Filament Diameter about 350m / 3.00mmFilament Diameter about 115m (Dimensional Accuracy +/- 0.05mm) / A wide range of colors available..
  • Recommended Extrusion/Nozzle Temp: 230°C - 250°C (401° F~ 437° F)..
  • PLA Filament Features: Minimal warping/ No heating bed required/ Little to no odor, a most commonly used thermoplastic material for 3D printing..
  • Widely Application: Inland PLA Filament is compatible with the majority of 3D printers, perfect for prototypes, desk toys, low-stress applications and other consumer productsDimensions: 155 x 155 x 85mm Inner Diameter: 55mm..
  • Premium Quality: Inland PLA 3D Printer Filament undergoes numerous testing procedures, 100% satisfaction guarantee provided..
Check Stock

3D Printer Filament - 1KG(2.2lb) 1.75mm / 3 mm, Dimensional Accuracy PLA Multiple Color (Fluorescent Orange,3mm)

  • 1 KG (approximately 2.20 lbs) Spool / 1.75mm Filament Diameter about 350m / 3.00mmFilament Diameter about 115m (Dimensional Accuracy +/- 0.05mm) / A wide range of colors available..
  • Recommended Extrusion/Nozzle Temp: 230°C - 250°C (401° F~ 437° F)..
  • PLA Filament Features: Minimal warping/ No heating bed required/ Little to no odor, a most commonly used thermoplastic material for 3D printing..
  • Widely Application: Inland PLA Filament is compatible with the majority of 3D printers, perfect for prototypes, desk toys, low-stress applications and other consumer productsDimensions: 155 x 155 x 85mm Inner Diameter: 55mm..
  • Premium Quality: Inland PLA 3D Printer Filament undergoes numerous testing procedures, 100% satisfaction guarantee provided..
Check Stock

3D Printer Filament - 1KG(2.2lb) 1.75mm / 3 mm, Dimensional Accuracy PLA Multiple Color (Fluorescent red,3mm)

  • 1 KG (approximately 2.20 lbs) Spool / 1.75mm Filament Diameter about 350m / 3.00mmFilament Diameter about 115m (Dimensional Accuracy +/- 0.05mm) / A wide range of colors available..
  • Recommended Extrusion/Nozzle Temp: 230°C - 250°C (401° F~ 437° F)..
  • PLA Filament Features: Minimal warping/ No heating bed required/ Little to no odor, a most commonly used thermoplastic material for 3D printing..
  • Widely Application: Inland PLA Filament is compatible with the majority of 3D printers, perfect for prototypes, desk toys, low-stress applications and other consumer productsDimensions: 155 x 155 x 85mm Inner Diameter: 55mm..
  • Premium Quality: Inland PLA 3D Printer Filament undergoes numerous testing procedures, 100% satisfaction guarantee provided..
Check Stock

3D Printer Filament - 1KG(2.2lb) 1.75mm / 3 mm, Dimensional Accuracy PLA Multiple Color (Luminous Yellow,3mm)

  • 1 KG (approximately 2.20 lbs) Spool / 1.75mm Filament Diameter about 350m / 3.00mmFilament Diameter about 115m (Dimensional Accuracy +/- 0.05mm) / A wide range of colors available..
  • Recommended Extrusion/Nozzle Temp: 230°C - 250°C (401° F~ 437° F)..
  • PLA Filament Features: Minimal warping/ No heating bed required/ Little to no odor, a most commonly used thermoplastic material for 3D printing..
  • Widely Application: Inland PLA Filament is compatible with the majority of 3D printers, perfect for prototypes, desk toys, low-stress applications and other consumer productsDimensions: 155 x 155 x 85mm Inner Diameter: 55mm..
  • Premium Quality: Inland PLA 3D Printer Filament undergoes numerous testing procedures, 100% satisfaction guarantee provided..
Check Stock