Top Gpio Header Reviews

LoveRPi Professional PoE HAT with PWM Fan Controller for Raspberry Pi 4

  • PROFESSIONAL RASPBERRY PI 4 POE HAT: Ideal for all PoE installation, this isolated PoE HAT offers up to 3KV of PD protection with 4-pin PWM fan header and 2-pin 5V header for displays and other accessories..
  • FULLY ISOLATED: The professional model features an isolation transformer for IEEE 802.3af/at compliance and generalized DC PoE compatibility in most environments. This greatly reduces the risk of electrical loops and allows the Raspberry Pi to be directly grounded through USB, HDMI, or GPIO header making it suitable for commercial applications in non-controlled environments..
  • INTEGRATED PWM FAN CONTROLLER: Based on the EMC2301 SMBus compliant fan controller, this PoE HAT is fully programmable over I2C to control standard 4-pin PWM fans. Set user-space or device-tree based temperature or event triggers for complete fan control from off to maximum RPM. Fan speed tach also provides stall detection, spin-up control, and ramp rate control with 1% accuracy from 500-16K RPM..
  • VENTILATED CASE WITH FAN HIGHLY RECOMMENDED: Do not use this product in an enclosed case without active air circulation. Airflow around the HAT and Raspberry Pi 4 Model B ensures performance and stable operation..
  • EASY INSTALLATION AND BACKWARDS COMPATIBLE: Please remove all non-essent....
Check Stock

HiLetgo 3pcs NodeMCU GPIO Board ESP8266 NodeMCU Pin Out IO Out 1 into 2 for ESP8266 ESP-12E NodeMCU Development Board

  • NodeMCU can be connected through by Pin Header & Screw Terminal.
Check Stock

sb components PiCube 4x4x4 LED Cube for Raspberry Pi 3,2, Zero and A+ Assembled (RED)

  • Available in three vibrant colors i.e. RED, GREEN, BLUE.
  • GPIO based operation. 40-pin stacking header for accessing GPIO of RPi.
  • Each Layer as well as each LED can be individually accessed and controlled as per requirements.
Check Stock

WayPonDEV NanoPi NEO Core Open Source Quad-core Cortex-A7 1.2GHz Allwinner H3 Single Board Computer Onboard DDR3 512MB RAM & 8GB eMMC Run Ubuntu Core and Armbian System (with Pin Header)

  • [CPU Performance]The NanoPi NEO Core is equipped with Allwinner H3 board ,it is Quad-core(Cortex-A76x4) CPU with a main frequency of up to 1.2GHz.
  • FriendlyCore 16.04(based on UbuntuCore-16.04).
  • FriendlyCore Focal (Base on Ubuntu 20.04).
  • [Pin-header] GPIO: two 2.54mm spacing 12x2pin header,one 2.54mm spacing 10x2pin header.
  • It includes UART, SPI, I2C, USB, I2S, Ethernet, GPIO etc..
  • [Connectivity] Ethernet: 10/100M Ethernet.
  • [Wiki] https://wiki.friendlyelec.com/wiki/index.php/NanoPi_NEO_Core. Any after-sales problems, please contact us by our tech-support click "WayPonDEV" store or leave the message in our forum by "forum.youyeetoo .com/" and ask the question..
Check Stock

Geniatech XPI-3128 Single Board Computer,Embedded Computer Module,Development Board ,Rockchip RK3128 Quad Core Cortex-A7 8GB WiFi ,Card-Sized High Performance Board

  • 85mm*56mm, Credit-card-sized High Performance Board.
  • 4*USB HOST, 1*HDMI Out, 1*Micro USB, 1*UART, 1*GPIO interface, WiFi and 100M LAN interface,Support Micro SD card.
  • Rockchip RK3128 with Quad-core Cortex-A7 up to 1.2GHz.
  • 40 Pin header enables hardware re-use by maintaining compatible alternate pin functions like I2S, I2C, PWM, UART, and GPIO. Form-factor compatible with Raspberry Pi 3 for easy migration..
  • Form Factor & GPIO Compatibility with Raspberry Pi for Maximum Re-usability.
Check Stock

waveshare for Raspberry Pi Pico Evaluation Kit B Include Pi Pico Board with Pre-Soldered Header,1.14inch RGB Color LCD, 10DOF IMU Sensor Module,Dual GPIO Expander,Breadboard

  • Raspberry Pi Pico Evaluation Kit inlclude Raspberry Pi Pico with pre-soldered header ,1.14inch LCD Display Module,10-DOF IMU Sensor Module,Dual GPIO Expander ,830 Quality Breadboard etc.
  • Raspberry Pi Pico Board,a tiny, fast, and versatile microcontroller board,Built Using RP2040 Microcontroller Chip Designed By Raspberry Pi.
  • 1.14" LCD Display Module for Pico ,Embedded ST7789 Driver, Using SPI Bus.
  • 10-DOF IMU Sensor Module,an IMU sensor expansion module specialized for Raspberry Pi Pico. It incorporates sensors including gyroscope, accelerometer, magnetometer, baroceptor, and uses I2C bus for communication..
  • Dual GPIO Expander for Pico,Two Sets Of Standard Raspberry Pi Pico GPIO Male Headers.
Check Stock

Libre Computer Board AML-S905X-CC Le Potato 64-bit 4K Media SBC and Pi 3 B+ Alternative (2GB 2-Pack)

  • ...er on the market with images based on UEFI booting and GRUB. For Raspbian, please run libretech-raspbian-portability from our Github on your Raspberry Pi first. Guide available on YouTube..
  • COMPATIBILITY AND EXTENSIBILITY: Form factor compatible with the Pi 3 for re-use with existing cases and power supplies. 40-pin header enables hardware re-use by maintaining compatible GPIO pin functions like SPI, I2C, PWM, and UART. Our powerful GPIO wiring tool, libretech-wiring-tool, is available on Github that can quickly translate from header or BCM GPIO numbers to sysfs and gpiod numbering. Dynamic dtoverlay support for faster design, testing, and learning..
  • HIGH PERFORMANCE LOW POWER: AML-S905X-CC performs faster than a Pi 3 B+ while using half the power. It is designed with power optimizations to increase sustained performance under load and reduce failures due to input voltage and current. It is one of the first SBCs to support 4K multi-codec hardware decoding and features a highly performant OpenGL ES 2.0 GPU for accelerated 2D/3D..
  • FASTER CPU AND DOUBLE THE MEMORY: Quad 64-bit 1.5GHz ARM Cortex-A53 Processors, 4K Ultra HD ARM Mali-450 750MHz GPU, 2GB of High Bandwidth DDR3, 4K 60FPS High Dynamic Range Display Engine for H.265 HEVC, H.264 AVC, VP9 Hardware ....
Check Stock

HCDC RPi GPIO Status LED & Terminal Block Breakout Board HAT for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B

  • The item has been soldered and assembled. Support for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B.
  • GPIO status LED and power 5V / 3.3V indication. GPIO output or input level high LED on, output or input level low LED off. 5V blue, 3.3V red, GPIOs....
  • Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper. 2 x 20 pins expansion....
  • Packing list: 1x terminal block breakout module, 4x M2.5x16mm nylon standoffs, 4x M2.5x6mm nylon standoffs, 4x M2.5 nylon nuts(NOTE: the item not....
Check Stock

3V 1Amp Power Adapter Supply 100-240 AC to DC 3Volt 1000mA 2.1mm X 5.5mm Plug 3V 1A AC/DC Power Supply Transformer

  • The item has been soldered and assembled. Support for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B.
  • GPIO status LED and power 5V / 3.3V indication. GPIO output or input level high LED on, output or input level low LED off. 5V blue, 3.3V red, GPIOs....
  • Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper. 2 x 20 pins expansion....
  • Packing list: 1x terminal block breakout module, 4x M2.5x16mm nylon standoffs, 4x M2.5x6mm nylon standoffs, 4x M2.5 nylon nuts(NOTE: the item not....
Check Stock

FriendlyElec NanoPi NEO3 Rockchip RK3288 Tiny ARM Single Board Computer with 2GB RAM USB3.0,Gbps Ethernet and Unique MAC Address

  • [Unique MAC Address] A unique MAC address ensures that a device with it will not have conflict with other devices' IPs in any network. This MAC address can be used as a device's fingerprint..
  • [Light & Full-speed Gigabit]---It features high speed data transmission and perfectly suits loT applications that require both high quality data transmission and small form factor.
  • [GPIO Programming Libraries, Ready to Go]---2.54mm pitch 26 pin-header onboard, include I2C, UART, SPI, I2S, GPIO.Connect, Git clone, and Make it..
  • [Security & Stability]---Running 64-Bit Ubuntu core xenial with latest mainline linux.
Check Stock

KEYESTUDIO Automatic Smart Plant Watering Kit for Arduino, Automatic Watering System for Your Plants

  • New Flexible Microcontroller Board --- Raspberry Pi Pico is a tiny, fast, and versatile board. It's based on RP2040 chip, which features a dual-core Arm Cortex-M0+ processor with 264KB internal RAM and support for up to 16MB of off-chip Flash, flexible clock running up to 133 MHz..
  • Multi-Function GPIO Pins---It has 26 multifunction GPIO pins, including 3 analogue inputs, 2 × UART, 2 × SPI controllers, 2 × I2C controllers, 16 × PWM channels..
  • Rich Peripheral Set---A wide range of flexible I/O options includes I2C, SPI, and — uniquely —8 × Programmable I/O (PIO) state machines for custom peripheral support..
  • Multiple Software Support---Raspberry Pi Pico has rich and complete software support and community resources. Programmable in C and MicroPython. Drag-and-drop programming using mass storage over USB..
  • This kit includes a Rpi Pico with headers soldered, 3-pin yellow header,830 breadboard, Doupont wires and micro USB cable..
Check Stock

sb components Raspberry Pi Serial Expansion HAT, Provides I2C Interface & 2-Channel UART HAT for Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero and Zero W | Serial HAT for Raspberry Pi

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards..
  • Onboard SC16IS752, expands 2-ch UART and 8 programmable GPIO through I2C, no extra pin required..
  • It is stackable up to 16 this modules by setting the address jumper, that means up to 32-ch UART..
  • Onboard multi LEDs for indicating the UART working status..
  • Reserved I2C control pins, allows to work with other control boards.
Check Stock

Vilros Raspberry Pi Zero- Zero W Compatible Case (Black)

  • Features 3 Covers, Sealed Open GPIO and Camera Module Compatible.
  • Includes a 40mm Raspberry Pi Zero / Pi Zero W Compatible Camera Cable and 2×20-pin Strip Dual Male Header.
  • Case ONLY Does NOT include Raspberry Pi Board Or Cables.
Check Stock