Top Gold Plated Pcb Reviews

Gikfun Large Solder-able Breadboard Gold Plated Finish Proto Board PCB DIY Kit for Arduino GK1008

  • It is the Large Gikfun Solder-able Breadboard.
  • This board is especially useful for preserving a prototype or experiment you just created on a solderless breadboard by soldering all the pieces in place.
  • Gold plated finish prevents oxidation, High quality Gold finish for easy soldering.
  • All holes are through-plated for strength.
  • Pack of 3PCS, Breadboard PCB for any type Raspberry Pi GPIO.
Check Stock

Ethernet Splitter Cable RJ45 Network Adapter, Onepeace 1 Male to 2 Female LAN Internet Cable Adapter, Suitable Super Cat5, Cat5e, Cat6, Cat7

  • Ethernet Splitter RJ45 1 to 2 allow 2 computers to share high speed DSL, cable modem or other Ethernet ports. NOTE: Don’t support 2 computers that connect to the internet simultaneously, ONLY 1 output port is working..
  • 【Enjoy High-speed Internet Access】Pure Copper Gold-Plated Needle with Eight Cores, Watching movies, chasing dramas, surfing the Internet, playing games, etc., lossless transmission rate is fast, so that buffering is faster without waiting..
  • 【Extensive Compatibility】Suitable for equipment with RJ45 interface, computer, router, network box, optical modem, can be used as an extension, compatible with Cat5/5e/6 7..
  • 【Thicker PCB】The Ethernet splitter connector adopts thicker PCB board, gold-plated needle core, and integrated mechanical welding to avoid damage caused by wire leakage..
  • 【Plug and Play】Connector A: 1 to 2 RJ45 Ethernet splitter, Connector B: RJ45 . This RJ45 1 to 2 RJ45 Ethernet splitter can help you avoid pulling cables back and forth, Installation simple and easy to use..
Check Stock

Gikfun Solder-able Breadboard Gold Plated Finish Proto Board PCB DIY Kit for Arduino Pack of 5PCS GK1007

  • This board is especially useful for preserving a prototype or experiment you just created on a solderless breadboard by soldering all the pieces in....
  • Breadboard PCB for any type Raspberry Pi GPIO.
  • Gold plated finish prevents oxidation, High quality Gold finish for easy soldering.
  • All holes are through-plated for strength.
  • Adaptable with a variety of MCU boards. Compatible with Arduino Nano, Pro Mini, NodeMCU, etc..
Check Stock

JODROAD RJ45 Coupler, Ethernet Couplers, Ethernet Extender Adapter, Cat8 Cat7 Cat6 Cat5e Cat5 Inline Coupler, Ethernet Connector Female to Female (2Pcs, Black)

  • ...at5 Ethernet cable. Meet or exceed Category 7 network performance..
  • ✅ High-precision PCB Board: The RJ45 Coupler adopts high precision PCB boards and passed profession test, compared with other regular PCB boards. it's more stable and reliable.(Regular Cheaper RJ45 coupler, please refer to ASIN:B09TRCG2WW).
  • ✅Gold-Plated Contacts: feature better corrosion protection,electrical conductivity and stronger durability compared with nickel-plated. Therefore,data transmission is more stable and without worrying about loss of signal..
  • ✅Easy and Efficient Extension: Plug & Play without installing a driver and easily connects two network cables together for extended-length applications..
  • ✅Premium Quality: Made of high quality ABS material and feature high-impact and fire-retardant.meets Category 7 performance in compliance with the TIA/EIA 568-C.2 standard .it's fully ROHS compliant..
  • ✅Widely Compatible: These Ethernet Connectors work with Cat5 Cat5e, Cat 6, Cat 6e, Cat 7 and Cat8 Ethernet cables.suitable for home ,office network cable extension ,Server room, POE security camera extension and Cabinet Integrated Cabling..
  • ✅Package Content: 2Pcs 10Gbps RJ45 Couplers,hassle-free 18-month warranty..
Check Stock

GLORIOUS Keyboard Stabilizer GSV2 Kit for Mechanical Keyboards, Gold Wire and Premium Polymer, MX Compatible, Easy Screw-in, PCB Mount, Enhanced Sound on GMMK 2, PRO & Numpad (2u, 6.25u, and 7u)

  • ⭐ Set of 7 Stabs: Comes with 5 x 2u stabilizers, 1 x 6.25u stabilizers, 1 x 7u stabilizer, gold-plated wires, 12 screws, and 12 washers.y material.
  • ⭐ Easy Installation: Simply remove pre-installed stabilizers and screw in GSV2 stabilizers into your board’s compatible PCB. NO CLIPPING NEEDED. Follow our detailed guide on the Glorious website..
  • ⭐ Unlubed: GSV2 stabilizers feature no pre-applied lube, letting you lube them to your preference. Combine it with our G-Lube for best results..
  • ⭐Wide Compatibility: Made with MX-Compatible Stems. Fits most third-party mechanical keyboards with PCB-mount stabilizer support. Designed for GMMK PRO, GMMK 2, and GMMK Numpad, but fits on.
  • ⭐ Premium Materials: Made with high-quality polymer and gold-plated wires, GSV2 keyboard stabilizers create a smooth press without ping or scratchiness..
Check Stock

GeeekPi Electronic Fun Kit,with 3PCS Half Sized Breadboard Cable Resistor LED Potentiometer for Electronic Learning Kit, Compatible with Arduino IDE, UNO R3, MEGA2560, Raspberry Pi Range(Black)

  • This is an entry-level kit that contains DIY solderable PCB breadboards, male and female Pin headers, LED lights, resistor packages, and jumper packages..
  • More than 200 pieces of components, compatible with Arduino IDE, Raspberry Pi and other microcontroller boards..
  • 3PCS Proto Breadboard PCB Board Gold Plated Experimental Breadboard Soldering Board Double-Sided PCB.
Check Stock

DUROCK V2 PCB Mount Screw in Stabilizers, Translucent Smokey Keyboard Stabilizers with 2u 6.25u 7u Wires, Keycap Stabilizers Mechanical Keyboard Stabilizers (V2 Smokey 60/87 Kit)

  • DUROCK V2 Stabilizers are PCB mount screw-in Stabs that feature a patent design and precision upgrade models to avoid wire drop out..
  • The V2 Stabs Stem / Sliders are pre-clipped design, do not require any clipping for fast & easy set up..
  • Well selected Premium Polymer Nylon housings, all the Stainless Steel Wires and hardware are sourced from Korea and with real gold coating..
  • Translucent Smokey V2 housings and the gold-plated Wires set gives your board an elegant and golden edge..
  • DUROCK Stabilizers V2 Compatible with PCBs that use "screw-in" or "PCB Mount" stabilizers. ( Washers, both 6.25u and 7u spacebar Wire included ).
Check Stock

Gikfun Mini Solderless Breadboard 400 Tie-points + 2xPCB Solder-able Breadboard + 2.54mm 10Pin Jumper Wires Male to Male DIY Kit for Arduino EK8473

  • This board is especially useful for preserving a prototype or experiment you just created on a solderless breadboard by soldering all the pieces in place..
  • 1 x Mini Solderless Breadboard 400 points, Size:8.3cm x 5.5cm..
  • 2 x PCB Solder-able Breadboard, Gold plated finish prevents oxidation, High quality Gold finish for easy soldering. All holes are through-plated for strength..
  • 10Pin 2.54mm Male to Male Jumper Wires Male to Male, 20CM..
Check Stock

SinLoon M.2(NGFF) Key M NVMe SSD Extension Cable Extender PCIe3.0 x4 Full Speed 12.6inch SSD Extension Cable (32cm)

  • 【M.2 NVMe Solid State Drive Extension Cable 】Allows you to extend M.2 NVMe slot outside of the laptop..
  • 【Maximum Transmission】PCIe3.0 x4 full speed.The maximum transmission rate is 32Gbps (Max.)..
  • 【Product advantages】If your Chassis is too small, the SSD will soar to 75°C when playing games. You can use this M.2 NVMe SSD extension cable to place it next to the fan and keep it at about 30°C offers you smoother experience..
  • 【Durable and strong】SSD Extension Cable uses high-quality materials, PCB workmanship precision, gold finger gold content is sufficient, gold-plated foot has good electrical conductivity, which can reduce the blue screen of the crash caused by the increase of oxidation and rust resistance. The signal transmission is stable at full speed and there is no compatibility problem..
  • 【Features】M.2 NVME SSD extension cable is fastened with screws and hex nuts. The product is strong and reliable, resistant to pulling, anti-interference, and will not be broken. The nail problem. The wire can be bent and folded without affecting the use. PCB long design to make the board easier to install, reducing the chance of damage..
Check Stock

Harby Centauri Overdrive and Boost Guitar Effects Pedal

  • A modernized, yet highly accurate circuit tribute of the legendary Klon Centaur overdrive pedal.
Check Stock

RUNJRX Keyboard Stabilizers Screw-in Stabilizers Shaft Mechanical Keyboard PCB Mount Transparen Screw-in Stabilizers 7U 6.25U 2U (60/87, Whiteness)

  • APPEARANCEThe translucent case makes your keyboard more beautiful, the gold-plated balance bar and gold-plated screws increase the oxidation resistance and extend the use time..
  • REASONABLE MATCHWe provide players with a screwdriver, easy to assemble and disassemble, also includes eva foam, according to their needs arbitrary cut, put into the keycap behind, effective noise mitigation, easy to install..
  • PACKAGE INCLUDINGScrewdriver x 1, stabilizer 2U x 4, stabilizer 6.25U x 1 , 7U balance bar x 1, screw x 10, high density eva custom foam x 1..
  • Hand FeelNo stuck keycaps, smooth feel, comfortable rebound strength..
  • AttentionThe RUNJRX Keyboard Stabilizer is a screw-in stabilizer for custom keyboard PCB..
Check Stock

PCB Mount Stabilizers,Velocifire PCB Screw-in Stabilizers Mechanical Keyboard Stabilizers PC Material Satellite Switch 7u 6.25u 2u for Mechanical Keyboard(Smokey Grey)

  • The set contains a 7U wire, a 6.5U stabilizer, four 2U stabilizers, ten washers, and ten gold-plated screws, which are matched with each other, making it more convenient to use..
  • Translucent Smokey housings and the Golden Wires set gives your board a clear and golden edge..
  • Designed for MX-compatible PCB Boards, the Transparent Stabilizer pack helps bring out the color in your LED-backlit keyboard..
  • Pre-clipped Insert method, no need to clip the feet. Fit for 60% and 80% Keyboard Set..
  • Polymer Nylon PA Outer Casing. Higher Hardness, Gold-plated Stainless Steel Wires and Screws-- Oxidation Resistance..
Check Stock

PCB Mount Stabilizers,Velocifire Keyboard Stabilizers PCB Mount Screw-in Stabilizer Mechanical Keyboard Gold Plated Stabilizer 7u 6.25u 2u for DIY Mechanical Keyboard(Transparent)

  • The set contains a 7U wire, a 6.5U stabilizer, four 2U stabilizers, ten washers, and ten gold-plated screws, which are matched with each other, making it more convenient to use..
  • Designed for MX-compatible PCB Boards, the Transparent Stabilizer pack helps bring out the color in your LED-backlit keyboard..
  • Translucent Smokey housings and the Golden Wires set gives your board a clear and golden edge..
  • Pre-clipped Insert method, no need to clip the feet. Fit for 60% and 80% Keyboard Set..
  • Polymer Nylon PA Outer Casing. Higher Hardness, Gold-plated Stainless Steel Wires and Screws-- Oxidation Resistance..
Check Stock