Top Gm Steering Wheel Puller Legs Reviews

ATPEAM Car Steering Wheel Puller | Automotive Steering Wheel Compressor Remover Set | Vehicle Steering Wheel Lock Plate Removal Tool Kit

  • Built to Last: Each piece in this steering wheel kit is constructed from steel with various finishes for maximum strength and longevity that resists rust and corrosion.
  • Function: Remove steering wheels of most vehicles with or without telescoping tilt steering columns.
  • Use to apply equal pressure so you can safely remove steering wheels, Perfect for the home or professional mechanic.
  • Tips: We recommend putting a drop of oil (not included) on the washer that goes between the nut and the locking plate tool when compressing the steering wheel locking plate.
  • Various Steer Wheel Cap Screws: Includes 4 sets of cap screws to be used for various thread requirements. Size of Cap Screws: M8-1.25 X 90 Mm, 3/8"-16 X 3-1/2", 5/16"-24 X 3-1/2", 5/16"-18 X 4".
  • Package Includeds: This steering wheel removal kit includes a steering wheel puller and bolts, non-threaded puller legs, steering wheel locking plate depressing tool, 4 sets of cap screws for various thread requirements and a carrying case for your convenience.
Check Stock

ABN 13 Piece Harmonic Balancer Steering Wheel Puller Kit

  • [Car Maintenance Made Easy]: When removing harmonic balancers, gear pulleys, steering wheels, and crank shaft pulleys, depend on the ABN 13 Piece....
  • [Even Application]: No need to worry about steering wheel puller harmonic balancer puller kit causing damage to car parts.
  • [Built to Last]: Steering wheel puller kit bits are hardened and tempered to ensure longevity and strength.
  • Machine precision flywheel puller tool....
  • [Fit for Your Tool Kit]: Wheel puller set includes (1) floating swivel, (2) 5/16 by 4 inch (7.9mm x 101mm) bolts, (2) 1/4 by 3 inch (6.3mm x 76mm)....
  • [Blow-Molded Case]: Steering wheel puller tool harmonic balancer steering wheel puller kit comes in durable blow-molded plastic case to ensure....
Check Stock

OEMTOOLS 25200 Steering Wheel Puller, Puller Tools, Pulley Remover, Steering Puller

  • FITS: This steering wheel kit is designed to fit many major makes and models.
  • The bolt sizes include 5/16 x 8 inches, 15/16 x 24 inches, and 3/8 x 16 inches, helping you easily complete any steering wheel removal.
  • EASY TO USE: Loosen the steering wheel retaining nut.
  • Lubricate and thread the pressure screw into the yoke.
  • Position the puller and bolts, threading the bolts equally into the steering wheel.
  • Tighten the center bolt until the steering wheel is free.
  • DURABLE: It is vital to have heavy duty tools that can stand up to wear and tear when working with steering wheels.
  • The automotive tools in this steering wheel puller kit are composed of steel, designed to be last for years to come.
  • CONVENIENT PACKAGE: Though this steering wheel puller tool set includes many parts, you do not have to worry about losing pieces with the convenient packaging.
  • SET INCLUDES: This steering wheel puller set includes a yoke, a pressure fastener, and 3 sets of pulling fasteners with washers and swivel.
  • Easily tackle any steering wheel repair project.
Check Stock

OTC 7929A Steering Wheel Puller Leg Kit

  • Particularly useful during steering wheel removal when there are no tapped holes in the assembly.
  • Designed for use with either the 7245 or 7403 OTC steering wheel puller.
  • These legs get behind the steering wheel assembly to provide an even straight pull.
  • The collar is designed for use on Ford and Chrysler vehicles.
Check Stock

JYAU RZR Steering Wheel Puller Tool for Polaris UTV XP1000 Turbo

  • Steering Wheel Puller Tool is a must have for race teams and recreational riders. Made from billet aluminum construction, a heavy duty center bolt for maximum leverage and socket head allen screws for outer edge pressure..
  • Compatible Replacement for Polaris RZR UTV XP1000 Turbo with the 2 threaded holes steering wheel - DOES NOT fit 2018+ XP Turbo S with Sparco steering wheel..
  • This Steering Wheel Puller Tool is designed for Polaris Vehicles with the 2 threaded holes in the OEM steering wheel. We recommend you pop the center steering wheel cover off to verify that your steering wheel has the 2 holes..
  • Usage Method - Heavy duty center bolt for maximum leverage Socket head allen screws for outer edge pressure Screw it to the threaded holes in your stock steering wheel and then tighten the center screw..
  • 1-Year Warranty - This Steering Wheel Puller Tool comes complete with a 1-Year Warranty. If the puller tool ever fails on your Polaris RZR UTV XP1000 Turbo within the period, simply contact us for a replacement. Save time and money by taking advantage of this ..
Check Stock

VQL Harmonic Balancer Steering Wheel Puller Kit (13 Piece) with Blow-Molded Case Use for Removing Harmonic Balancers, Gear Pulleys, Steering Wheels and Crank Shaft Pulleys

  • 【Widely Used】 Harmonic Balancer Steering Wheel Puller Tool are used to removal of harmonic balancers, gear pulleys, steering wheels and crank shaft pulleys. This is a universal type puller.003c/p003e.
  • 【Durable】 13 Piece Harmonic Balancer Steering Wheel Puller Kit are made of high-quality steel, Drop Forged, Heat Treated, this tool set is very durable.003c/p003e.
  • 【Apply Pressure Evenly】 Yoke allows for either 2 or 3-hole application. The harmonic balancer puller allows uniform pressure on the parts, No need to worry about the steering wheel puller and harmonic puller puller kit will damage the auto parts.003c/p003e.
  • 【Package Included】 1* center screw, 1* Floating swivel, 2* 5/16 x 4 bolts, 2* 1/4 x 3 bolts, 3* 1/4 x 2 bolts, 3* 5/16 x 2 bolts and 1* Blow-molded Case.003c/p003e.
  • 【Various Sizes】 Steering wheel pullers has a caster with four slots for using in nearly any configuration. Various sized provides necessary versatility.003c/p003e Buy with confidence. We provide refund and exchange service, if you have any questions, please feel free to contact us.003c/p003e.
Check Stock

Shankly Steering Wheel Puller Kit (8 Piece), Professional-Grade, 1.5” to 3.35” Inch Spread, Ideal Combination for Harmonic Balancer Puller and Flywheel Puller

  • ✅ COMPLETE WHEEL PULLER SET: The steering wheel puller set from Shankly includes two thrust caps and a two-leg puller with two sets of legs. It has a maximum spread of 38/85MM, or 1.5"/3.35.
Check Stock

Orion Motor Tech Power Steering Pump Pulley Puller Installer Tool Set, Pump Pulley Remover Installer Tools Compatible with Ford, GM, and Chrysler

  • POWER STEERING REPAIR SET: This Orion Motor Tech tool kit for home and professional power steering repair pulls and installs any pump pulley with a 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inch hub diameter.
  • COMPLETE 7-PIECE SET: This pulley pump puller kit includes a pulley remover, a pulley installer, 2 forcing screws, 1 sleeve, 2 puller jaws, and a disconnect tool.
  • the reversible puller jaw design also lets you check and repair pulley flanges with greater ease.
  • DURABLE PERFORMANCE: Each of these power steering tools is constructed from structural-grade AISI 1045 medium carbon steel for the necessary strength to get your work done right.
  • each piece is also heat treated and blackened for even greater dependability and superior corrosion resistance to give you years of use.
  • WIDE COMPATIBILITY: This pulley pump removal kit is compatible with the Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles and the belt-driven vacuum pumps and press-on water pump pulleys in GM’s V6 engines.
  • the two forcing screws also work with most VW vehicles’ power steering systems.
  • USER FRIENDLY: This power steering pump pulley installer and remover set is intuitive but also comes with clear instructions for easy step by step operation.
Check Stock

Orion Motor Tech Power Steering Pump Pulley Puller/Installer Tool Set, Pump Pulley Remover Installer Tools Compatible with Ford, GM, and Chrysler Vehicles

  • POWER STEERING REPAIR SET: This Orion Motor Tech tool kit for home and professional power steering repair pulls and installs any pump pulley with a 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inch hub diameter.
  • COMPLETE 7-PIECE SET: This pulley pump puller kit includes a pulley remover, a pulley installer, 2 forcing screws, 1 sleeve, 2 puller jaws, and a disconnect tool.
  • the reversible puller jaw design also lets you check and repair pulley flanges with greater ease.
  • DURABLE PERFORMANCE: Each of these power steering tools is constructed from structural-grade AISI 1045 medium carbon steel for the necessary strength to get your work done right.
  • each piece is also heat treated and blackened for even greater dependability and superior corrosion resistance to give you years of use.
  • WIDE COMPATIBILITY: This pulley pump removal kit is compatible with the Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles and the belt-driven vacuum pumps and press-on water pump pulleys in GM’s V6 engines.
  • the two forcing screws also work with most VW vehicles’ power steering systems.
  • USER FRIENDLY: This power steering pump pulley installer and remover set is intuitive but also comes with clear instructions for easy step by step operation.
Check Stock

WYNNsky 46 Pieces Steering Wheel Puller Kit, Use with Harmonic Balancers, Crankshaft Pulleys and Gears, Work on Most Cars, Pickups, SUVs

  • Application: This 43-piece set can be used on a variety of jobs: harmonic balancers, steering wheels, crankshaft pulleys, and gears with tapped holes. It covers multiple applications on most cars, pickups, and SUVs on the market today, also for 2 or 3-hole application..
  • 4-Way Slotted Puller Yoke: The whole forging is integrally formed, with strong toughness and durability, Adapt to various steering wheel disassembly, No bending and deformation. 9mm thickness, 37mm× 11mm hole size, 93mm Max span..
  • Live-center Forcing Screw: It features Quenching and forging, higher hardness, uniform force, avoid rust, 3 interchangeable forcing screw tips to optimize pressure and prevent walking or wobbling while tightening..
  • Easy to Use: Look for threaded holes in the wheel hub assembly. These holes are designed to be used by the puller for removal. Attach the steering wheel puller using the appropriate bolts. As you slowly tighten the center bolt, it presses on the steering shaft, causing the puller body to lift, pulling the steering wheel with it..
  • Includes: 1pc yoke, different size of bolts, 3pcs 3/8’’×16×2‘’, 3pcs 3/8’’×16×3’’, 2pcs 3/8’’×16×4-1/2’’, 3pcs 3/8’’×24×1-1/2‘’, 2pcs 1/4’’ ×28×2-1/2’’, 2pcs 5/16’’ ×18....
Check Stock

CartClan Club Car DS Steering Column Rebuild Kit 1992-Up Gas & Electric Golf Cart 1014216

  • UNIVERSAL DESIGN that can be made to fit most vehicles by modifying the wiring harness to the vehicle’s harness, mounting brackets, steering shaft, and steering wheel.
  • 28” COLUMN LENGTH IS MEASURED from the top of the bell to end of the output shaft.
  • INCLUDES (optional) 9-hole GM steering adapter, tilt, turn signal & hazard levers, and GM-style electrical plug.
  • CHROME FINISH for great looks and long life.
  • ACCEPTS ANY 1969-1994 GM steering wheel or adapter.
Check Stock

A ABIGAIL Lower Intermediate Steering Column Steering Shaft Assembly Fits for 2005-2015 Toyota Tacoma 4WD & PreRunner 2WD or 4WD Replaces 4520304021

  • UNIVERSAL DESIGN that can be made to fit most vehicles by modifying the wiring harness to the vehicle’s harness, mounting brackets, steering shaft, and steering wheel.
  • 32” COLUMN LENGTH IS MEASURED from the top of the bell to end of the output shaft.
  • INCLUDES (optional) 9-hole GM steering adapter, tilt, turn signal & hazard levers, and GM-style electrical plug.
  • CHROME FINISH for great looks and long life.
  • ACCEPTS ANY 1969-1994 GM steering wheel or adapter.
Check Stock

WINTOOLS 12 Pcs Pulley Puller Remover & Installer Kit Power Steering Pump Alternator Pulley

  • Removes pressed-on alternator and power steering pulleys on late-model GM and Chrysler engines..
  • The threaded end installs late model GM alternator and power steering pulleys, including Quad 4.
  • This puller fits some AMC vehicles. Will NOT work on 3.3L and 3.5L Chrysler engines.
  • Reverse the jaws to pull the alternator internal bearing..
  • Case Dimensions: (L)9″ x(W)7.25″ x(H)2″. Weight 2 lbs..
Check Stock