Top Gm Ford Fuel Pump Reviews

OEMTOOLS 37383 VW/Audi Fuel Injector Puller Kit Puller Set Injector Puller Tool Puller Extractor VW Tools Injector Removal Tool VW Injector Tool

Great Compatibility — Works on Ford and GM vehicles. Fit for 2004-newer Chrysler / 2004-newer Ford F-150 trucks / Dodge mini-vans PT Cruiser Dakota....
Upgrade Design — Design to fit fuel tank lock rings in order to easily removes and installs lock ring on the fuel tank when servicing the fuel pump....
Easier Work — Position the tool mentioned earlier in this thread in the notches. Use with a 1/2 drive ratchet or breaker bar..
Superior Quality — Made of High Standard Carbon Steel with black finish, great strength and durablity, anti-corrosion and never rust, no deformation....
100% Satisfaction Guarantee — If you're not 100% satisfied with our tools, simply return it for a full refund in 30 days. Support 12 months’....

Check Stock

NEW HOLLEY SNIPER EFI STEALTH KIT 4150 4 BBL FUEL INJECTION CONVERSION MASTER KIT,GOLD,870 CFM,COMPATIBLE WITH 4150 FLANGE STYLE MANIFOLDS

...| Injector Size: 100 lb/hr @ 58.5 PSI | Inlet/Outlet Size: 3/4-16 Female.
Injector Size: 100 lb/hr @ 58.5 PSI | Inlet/Outlet Size: 3/4-16 Female O-Ring (AN 8) | MAP Sensor: 2Bar | Max Horsepower Rating: 650 Naturally Aspirated | Model: 4150 EFI Conversion Throttle Body | Product Type: EFI | Transmission: 700R4/200R4 Ford C4/C6 TH350.
The Sniper Stealth 4150 EFI system from Holley features 4, 100LB/HR Fuel Injectors capable of supporting up to 650 HP naturally aspirated or 600 HP on forced induction applications. The Sniper Stealth 4150 ECU is capable of fuel map self-learning and ignition timing control, improving idle stability, drivability, and wide-open throttle horsepower! Did we mention that the Stealth 4150 also includes transmission kick down provisions for GM TH350/400, 200R4/700R4 and Ford C4/C6 applications..
Master Kits include complete fuel system with an external fuel pressure regulator preset to 58.5 PSI, 20 feet of 3/8″ Vapor Guard Fuel Hose, Fuel Pump, Filters, necessary hardware & bulkhead fitting to return fuel into the tank!.

Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-100PSI, Universal for Auto Truck SUV Motorcycle ATV RV

3 CONNECTION TYPES FOR TU-113 FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 14"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 11"L hose for the small Schrader valve (for some Ford), and 8"L hose for M6 fuel pressure test port. 1/4" barbed brass fittings is direct for special test outlet on engine, and aluminum tee splices in-line between the fuel pump and engine for most vehicles..
PRIMARY FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 2-3/4" large dial with 0-100psi/0-7bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. Please note, there is no pressure relief valve and drain hose, please wrap cloth around hose connection before relieving pressure from fuel line and removing testing components..
CHECK FUEL INJECTOR PUMP PRESSURE: The pressure gauge is designed for checking the fuel injection pump pressure easily and quickly. You can compare the pressure value to the manufacturer's recommended reference range, aid to diagnose gasoline engine fuel system. Low fuel pre....

Check Stock

OEMTOOLS 27031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW

POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
Pulls pulleys on GM belt-driven vacuum pumps.
HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
Power steering pump pulley installer designed to tackle any small pulley job.
CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
Pulls pulleys on GM belt driven vacuum pumps.
Pulls pressed-on water pump pulleys of GM V6 engines.

Check Stock

OEMTOOLS 37031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW , green

POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
Pulls pulleys on GM belt-driven vacuum pumps.
HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
Power steering pump pulley installer designed to tackle any small pulley job.
CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
Pulls pulleys on GM belt driven vacuum pumps.
Pulls pressed-on water pump pulleys of GM V6 engines.

Check Stock

Performance Tool W89330 Fuel And Transmission Line Disconnect Set, 7-Piece

Color coded anodized aluminum fuel line disconnect tools.
Transmission cooler line disconnect tool.
Ford and Mercury transmission cooler line disconnect tool.
Ford, Chrysler and GM quick disconnect tool.
Ford, Chrysler and GM quick disconnect tool..

Check Stock

JIFETOR Fuel Injection Pump Pressure Test Gauge Set, Automotive Gas Gasoline Fuel Oil Injector Tester Tool Kit 0-140PSI, with Schrader Adapters Universal Compatible with Ford Auto Car Truck Motorcycle

...ure injection pump or direct-injection engine.
UPGRADED FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 5-1/2"L hose for small Schrader valve (compatible with some Ford), and 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee can splice in-line between the fuel pump and engine for most vehicles.
140PSI/10BAR PRECISION-MACHINED FUEL PUMP TESTER GAUGE: You just need to ensure there is an adapter in the kit suitable for your test port or the inline connection is workable for your car. Pressure gauge adopts rubber cover protected 3-1/2" large dial and dual color coded scale, helps to monitor vehicles' fuel pressure easily. Equip with pressure relief valve and 16" drain hose for safer pressure discharge and fuel recovery. Reliable nylon resin hose is resistant to fuel, wear and corrosion.
CHECK FUEL INJECTOR PUMP PRESSURE: Proper fuel pressure is vital for engine operation and performance. No matter higher or lower fuel pressure can cause many engine problems and both require great attention. Higher value may res....

Check Stock

YSTOOL Fuel Pressure Tester Gauge Kit 140PSI Automotive Engine Injector Pump Test Gasoline Gas Injection Manometer Tool Set with Inline Fitting Schrader Adapter for Auto Car Motorcycle (Blue Case)

... pump's standard Schrader / M6 / M8 / M10 / M12 / M14 fuel pressure test port with 15" / 8" hose and M8 / M10 / M12 / M14 adapters. The other is to measure by fitting the T-type joint between the fuel pump and engine. Please note: no small Schrader connector in this fuel presure test kit to perform service for some Ford models..
Accurate fuel pressure gauge has a 3-1/2" big color-coded dial with shockproof rubber cover. 15"L hose can attach to the 1/4" SAE standard Schrader valve on fuel pump or fuel rail directly. The built-in translucent fuel discharge hose and pressure release valve work for safe pressure release & easy fuel recovery. The connectors are made of brass and aluminium, good airtightness & anti-corrosion. Reinforced rubber resin nylon hoses (WP:300PSI) are resistant to torsion & high temperature.
After testing the fuel pressure by YSTOOL gasoline engine fuel injection pressure tester, compare the reading with the recommended pressure range. If higher, it could be a faulty fuel pressure regulator or a bent clogged return line. If lower, possible causes are dirty fuel filter, weak pump function, incorrect fuel tank exhaust, restricted fuel line, clogged pump inlet filter or electrical control failure. Petrol is highly flammable, please ask....

Check Stock

90 Degree ID 3/8' 3/8' Fuel Line Quick Connect Release Disconnect Connector 10mm For Ford GM

90 Degree Fuel Line Fittings Per Order (Fuel Line Quick Connector That Adapts 3/8 In. Steel to 3/8 In.).
Fitting Attachment End 1: Quick Disconnect.
Compliant with SAE automotive standards, Guaranteed to fit your GM/ FORD Vehicles.
FITMENT: Fits Camaro, Chevy/Ford/GM Vehicles.
SHIPMENT: We ship SAME DAY or within 1 Business Day.

Check Stock

FD-4616 Fuel Filter for Ford F Series 6.0L Powerstroke Replace 3C3Z9N184CB-FD4616 Fuel Filter By TOPEMAI

FD-4616 Fuel Filter Fits all Ford 6.0 F-Series Diesel Powerstrokes V8 engines from 2003-2007. FD-4616 Fuel Filter Replaces part number:3C3Z9N184CB,3C349N074BA,3C3Z9N184CA,FD4604,FD4616..
FD-4616 Fuel Filter includes both upper fuel bowl and lower lifter pump filter.For Ford F250/Ford F350/Ford F450/Ford F550 Super Duty 2003-2007,Ford Excursion 2003-2005..
FD4616 Fuel Filter AKA Ford 6.0 Fuel Filter,6.0 Ford Fuel Filter,FD4616 Fuel Filter,FD4616 Motorcraft Fuel Filter,Motorcraft FD-4616,Motorcraft FD-4616 Fuel Filter,FD-4616,FD 4616,FD 4616 Fuel Filter,FD-4616 Motorcraft,FD 4616 Motorcraft,Ford F250 Fuel Filter,Ford F250 Diesel Fuel Filter,Ford F250 6.0 Fuel Filter,Ford F350 Fuel Filter,3c3z9n184cb,6.0 powerstroke fuel filter...
Fuel filtration system prevents foreign material from entering the engine while allowing enough fluid or air flow to keep the engine running properly..
This is not original, but it's a perfect aftermarket replacement. Feel free to contact us by emails if you have any problems..

Check Stock

ABN Fuel Line Disconnect Scissor Tool for 5/16in and 3/8in Vehicle Fuel Lin Compatible with GM, Ford, Mazda

Practical: Use the ABN Fuel Line Disconnect Scissor Tool for 5/16” Inch and 3/8” Inch GM, Ford, and Mazda Vehicle Fuel Lines for a simple and fast separation of quick disconnect couplings and/or fittings.
Versatile: Designed for both 5/16” and 3/8” fuel lines.
Compatible with 1989 and newer GM vehicles, 1990 and newer Ford vehicles, and some 1990 and newer Mazda vehicles.
Easy to Use: Release the fuel line locking mechanism by listening for the slight “click” that means that it has done its job and you can easily pull off the filter.
Comfortable Grip: Handles have an easy to grasp design that offers a strong grip for maximum torque.
Durable: All metal construction and design built for strength and longevity.

Check Stock

Lisle 37000 Air Conditioning/Fuel Line Disconnect Tool Set

Easily Disconnects Air Conditioning Lines and Quick Connect Fuel Lines. Set of six tools which disconnect the spring lock couplings on Ford and Chrysler air conditioning line. Also works on fuel line quick connect couplings found on GM, Ford, and Chrysler. The 5/16" size fits on push lock connectors found on Ford radiators and transmission lines. Easy to use in confined spaces. Set includes six sizes: 5/16.

Check Stock

Electric Fuel Pump Assembly for 1990 1991 1992 1993 1994 1995 1996 Ford F150 F250 F350 1997 F-250 HD (After Axle Tank; Steel Tank; 18 Gal Tank) Replaces SP2007H

【Warranty】This fuel pump comes with 60 Days HASSLE-FREE RETURN & 1 Year / 12 months unlimited replacement promise. If you don't like it, just return it and get a full refund. If it doesn’t work well and just contact us, we’ll offer you a replacement directly. Our aim is to make you satisfy the parts and the service we provide for you..
【Interchange Part No.】SP2007H, F4TZ9A407C, F6TZ9A407CA, F6TZ9A407CC, PFB3..
【Application】This fuel pump module assembly kit is especially designed for 1990-1996 Ford F-150 F-250 L6-4.9L & V8-5.0L & V8-5.8L.
【Package】Includes Fuel Pump, Sending Unit, Float, Fuel Pressure Regulator, Fuel Strainer, Tank Seal and Wire Harness..
【Compatibility】Please Check fitment for your vehicle Year/Make/Model on compatibility dropdown / chart. No modification necessary. Images depict actual item and necessary components..

Check Stock