Top Glow Plug Ignitor Reviews

Lipo Charger,Battery Charger Balance Charger Discharger with Power Supply for LiPo/Li-ion/Life Battery 1-6S ,NiMH/NiCd 1-15S ,PB 2-24V ,Smart Battery Lipo Battery Charger

For sale is 19 in 1 rc multifunction balance charging cable,perfect fit for RC Car Truck Lipo Charging.Suitable for RC airplane, rc quadcopter and rc....
Output Plug: TRX Style Plug, Tamiya Style Plug, Mini Tamiya Style Plug, Glow Ignitor, EC3, EC5, XT60,JR TX, JST,Deans Ultra-type, Mini Deans....
19 in 1,used for different kinds of batteries,save you time and money when you are paying attention on what connectors you are getting for your....
Attention:Red is positive and Black is negative,so please pay attention to correct use of this multi charger adapter.

Check Stock

767A-378 White Rodgers Furnace Hot Surface Ignitor for Norton 601 601TB 20165702

767A-378 Furnace Hot Surface Ignitor White Compatible with Norton 601 601TB 20165702.
Includes (1) Furnace Hot Surface Ignitor as pictured.
Part number # 767A-378. This igniter Compatible with Robertshaw # 41-602 Norton # 601, 601TB & OE # 20165702..
This Ignitor has a 2-1/4" long from bracket to end of ignitor. 5" Wire Leads with Plug, wire nuts included. 120V..

Check Stock

Space Heater Photocell PP236 M16656-24 for Reddy Remington Master Knipco Heaters Parts Replacement

PP236 M16656-24 Photocell for Reddy Remington Master Knipco Heaters Parts.
for DESA: Dayton, Knipco, Koehring, Master, Reddy, Remington, Sears, TSC: (PP236, M16656-23, M1665623, M16656-24, M1665624).
PINNACLE: ProTemp, Master, Remington, Heat-Stream, WorkHorse, Heat Hog & SunStream: (71-016-1010, 710161010).
This photocell is used with heaters that have the hot surface ignitor (glow plug). UNLESS you have the DESA upper tier heaters that have the plastic handle and shroud that covers the fuel tank. That photocell is part M16656-21.

Check Stock

ZFLXH Space Heater Replacement Parts PP236 Photocell For Reddy Remington Master Knipco Heaters M16656-24

⭐PP236: Photocell Assembly should be used with 104068-02 ignition control boards on oil fired heaters..
⭐This photocell is used with heaters that have the hot surface ignitor (glow plug). UNLESS you have the DESA upper tier heaters that have the plastic handle and shroud that covers the fuel tank. That photocell is part# M16656-21.
⭐PINNACLE: ProTemp, Master, Remington, Heat-Stream, WorkHorse, Heat Hog & SunStream: (71-016-1010, 710161010).
⭐DESA: Dayton, Knipco, Koehring, Master, Reddy, Remington, Sears, and TSC: (PP236, M16656-23, M1665623, M16656-24, M1665624).

Check Stock

Pro-Parts New Replacement PP236 Photocell Heaters for Reddy Remington Master Knipco DESA M16656-24

PP236: Photocell Assembly should be used with 104068-02 ignition control boards on oil fired heaters..
Apply to DESA: Dayton, Knipco, Koehring, Master, Reddy, Remington, Sears, and TSC: (PP236, M16656-23, M1665623, M16656-24, M1665624) PINNACLE: ProTemp, Master, Remington, Heat-Stream, WorkHorse, Heat.
This photocell is used with heaters that have the hot surface ignitor (glow plug). UNLESS you have the DESA upper tier heaters that have the plastic handle and shroud that covers the fuel tank. That photocell is part# M16656-21.
A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable)..

Check Stock

WB13K21 GE Compatible Replacement Oven Range Flat Igniter Norton 501A 229C5216P001 Ignitor

2 prong molex plug end on it. 2 porcelain wire nuts are included.
The wire leads measure 8″ long to end of plug.
The ceramic bar measures 1.5″ long & metal shield around ignitor.
It is a replacement Norton 501A, 229C5216P001, WB13K21, WB13T10045, AP2020569, AP3202322, PS231280 and PS952863.

Check Stock

Furnace Ignitor Igniter Directly Replaces Rheem 62-22868-02

Made from high-purity recrystallized silicon carbide (crystar) which combines physical and thermal strength with stable electrical properties.
Designed to reach ignition temperature(s) within 17 seconds.
Have 18-gauge nickel chrome lead wires embedded and metalized in place for maximum holding strength and electrical conductivity.
Manufactured with lead wires enclosed in a special high-temperature fiberglass insulation providing electrical protection.
Operate at 120 vac. Some modules are rated for 208/240V input, however, the voltage to the ignitor is stepped down to 120 vac..

Check Stock

Pertronix D186604 Flame-Thrower VW Type 1 Engine Plug and Play Non Vacuum Cast Electronic Distributor with Ignitor Technology

All new lightweight cast aluminum housings.
Tailored advance curve for optimal performance and driveability.
Integrated Ignitor electronic ignition delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
Rotating cobalt magnets trigger a Hall Effect integrated circuit which enables precise timing.
High dielectric strength cap with brass terminals.
Tailored advance curve for optimal performance and driveability. 2:1 improvement over points in current fall time for increased coil output.

Check Stock

Gekufa Grill Hot Rod Ignitor Kit with Fuse Compatible with Traeger, Pit Boss, Camp Chef Wood Pellet Grills (Pack of 2)

【COMPATIBILITY】Replacement hot rod ignitor kit compatible with all Traeger wood pellet grill models (EXCEPT PTG) : Traeger 070, 075, Texas Elite Series, Pro 22, Pro 34, Lil Tex Elite Series, BBQ Series ,Pit Boss 700 700FB 70112 820 820D 820Pro. It also fits for Camp Chef wood pellet grills..
【POWERFUL FUNCTION】This grill hot rod ignitor ignites the hardwood, making starting your grill as simple as flipping a switch. And it keeps fire going, get delicious flavor with hardwood fuel..
【EASY INSTALLATION】It can be installed easily, plug and play wiring. You just need to took about 10 minutes to replace. Located at bottom of firepot, for proper installation, only 1/8-1/4 inch should be showing in firepot..
【DIRECT REPLACEMENT】When your current hot rod shortens or burns out, this hot rod ignitor kit replacement part will ensure that your grill continues to operate effectively..
【PERFECT FIT】High density cartridge heating element, 200W/120V-24" wire lead, 5A/250V fuse, identical match to the OEM hot stick..

Check Stock

(KAS) Viking Gas Range Oven Stove Cooktop Flat Ignitor Igniter PB040001

Gas Range Oven Replacement Viking Ignitor AR04001.Replaces part # PB040001..
Included with this ignitor is:1 Ignitor/2 Ceramic Wire Nuts/2 Wire Assemblies, with Female Insulated Terminals.
This is a Flat Bar Syle Ignitor./The White Ceramic part of the ignitor measures 2-1/4" Long..
The Ignitor part (the part that glows) measures 2" Long.The overall length from end of ceramic to end of the metal bracket is 4-1/2"..
The 2 wires measure 12-1/2" Long from terminal end to ceramic..

Check Stock

dibay Auger Motor Induction Fan Kit Fire Burn Pot and Hot Rod Ignitor for Traeger and Pit Boss Wood Pellet Grill Parts Replacement

Perfect Fits: Compatible for Traeger and Pit Boss pellet grills (except PTG), Fits Model: Texas Elite Series, Pro 20, 22, & 34, Fits all Traeger grill....
Package contains: Fire Burn Pot x1, Hot Rod Ignitor x1, Auger Motor x1, Induction Fan Kit x1, Power Cord x1, Fuse x1, and screws..
Dimensions: Fire Burn Pot: 5" x 3 1/2" x 3 3/4", Hot Rod Ignitor: hot stick 3.7" total length 30", Auger Motor: AC120V / 60Hz 1.6RPM, Induction Fan....
Easy install: plug and play, very simple. If you have any questions about installation, you can search YouTube for relevant model installation videos....
After-sales service: We use Amazon's official warehouses for storage and distribution. If you have any questions during use, please write us an email.....

Check Stock

70-052-0200 spark plug ProTemp for Remington Master HeatStream 120k-215k btu

This 70-052-0200 ignitor/spark plug is used on 125k, 175k, 215k and 400k btuoil fired heaters made by Pinnacle.
70-052-0200 spark plug ProTemp, for Remington, Master, HeatStream 120k-215k btu.
ProTemp: PT-125T-KFA, PT-175T-KFA, PT-215T-KFA HeatHog/Remington: HH-125T-KFA, HH-175T-KFA, HH-215T-KFA Master: MH-125T-KFA, MH-175T-KFA, MH215T-KFA....

Check Stock

RO6G Gas Range Oven Igniter for Whirlpool Maytag 74007498 PS2085070 AP4096256 74007498 7432P106-60 AP4096256 PS2085070

The wire leads measure 8" long to end of plug..
It is a replacement part number 501A, Maytag and Whirlpool Numbers 74007498, 7432P106-60, AP4096256, PS2085070..

Check Stock