Top Glock Sight Tools Reviews

Recover Tactical GR19L Rail Adapter for Glock 19 and 23 Generation 1 and 2 No Modifications Required Installs in Under 3 Minutes

  • Magazine Disassembly Tool: The easiest and fastest way to remove base plates from the standard Glock magazines without any damage to the plates and....
  • Front Sight Installation Hex Tool: Magnetized hex tool to aid in the installation and removal of front sights on Glock pistols.
  • Armorers Disassembly Tool: Aid in the removal of pins and base plates on Glock pistols.
  • Comes with a handy pouch to storage these Glock tools.
Check Stock

StarONE Universal Handgun Sight Pusher Tool Fit for Glock 1911 Sig Springfield and Others Market for Front or Rear Sights

  • Universal sight pusher tool grips 4 sides of the slide to stop the slide from moving..
  • Handgun sight pusher tool fits for all glock models, springfields, sigs and other handguns. Also fits the ones with slide mounted levers like beretta 92fs after the lever is removed..
  • Pistol sight pusher tool can be used to remove or install front or rear sights easily, and do not need extra block sets to try and grip the slide..
  • Glock 1911 sight pusher tool made of 6061 Aluminum..
  • This sight adjustment tool does not need extra block sets to try and grip the slide like most other tools offered on the market..
Check Stock

The Ultimate Complete Armorer Kit includes Front and Rear Sight Installation + Disassembly Tool and More in Foam Lined Storage Case works with Glock 17 19 19X 20 22 23 29 31 32 37 38 43 43X 45 48

  • This is the Ultimate Armorer Tool Kit for Glock - Includes 5 Critital Armorer Tools.
  • Works with virtually all Glock models including G17 G19 G19X G20 G22 G23 G29 G31 G32 G37 G38 G43 G43X G45 G48.
  • Includes Rear Sight Adjustment/Installation/Removal tool and Hex Nut Driver Tool to Remove Glock front sight.
  • Includes Tools for Disassembly and To Help You Perform General Maintenance.
  • This item Cannot be Exported Outside the USA.
Check Stock

LIRISY Glock Tool Kit Front Sight Tool Magazine Disassembly Tool and Pin Punch Tool for Glock

  • Front Sight Tool: it is a 3/16’’ hex thin wall nut driver to install and remove the front sights on Glock pistols.
  • Pin Punch Tools: a disassembly tool for removing all pins on Glock pistols.
  • Magazine Disassembly Tool: Safely and easily disassemble your Glock magazines for cleaning and inspection without damaging.
Check Stock

Real Avid Glock Armorer Tool Kit: 2-in-1 Glock Gun Multitool with Glock Front Sight Tool, Glock Punch Down Tool and Glock Magazine Tool for Unloading, Disassembly & Maintenance I Compatible with Glock

  • MUST-HAVE ACCESSORIES FOR GLOCK: gun multitool for Glock, featuring Glock front sight tool, gun disassembly and pin removal tool, magazine unloader and Glock magazine disassembly tool.
  • EASY GUN DISASSEMBLY: 3mm punch makes a pin removal tool that fits all Glock gun pin sizes.
  • easily remove pins to disassemble your Glock gun to clean, modify, or maintain..
  • GLOCK FRONT SIGHT TOOL: magnetic 3/16′ hex hut driver fits Glock front sights.
  • change standard Glock sight and install Glock night sights or dedicated height sights..
  • GLOCK MAGAZINE TOOL: easily change magazine plate or disassemble OEM Glock magazine.
  • captures the spring for safe and easy cleaning.
  • INSTALL CUSTOM MAGAZINE PLATE: remove standard, black base plates and install color plate to match your custom Glock slide, Glock grip or Glock back plate.
  • GUN SAFETY: after using your Glock gun on the range, easily and safely unload the magazine with quick unload feature on the back of the tool.
  • FITS EVERY GLOCK GUN MODEL AND OEM GLOCK MAGAZINE: compatible with all generations of Glock 19, Glock 17, Glock 43, Glock 26, Glock 22, Glock 48, Glock 27, Glock 45, Glock 21, Glock 42, Glock 30, Glock 34, Glock 20, Glock 44 and more.
  • MAG TOOL DOES NOT WORK on extended base plates such as the Glock+ base plate found o....
Check Stock

Optic Mounting Plate for Glock(Non-MOS/Aftermarket Slide),Taurus GX4,G3C,Canik TP9SA-Compatible with ADE Stingray,Riton X3 Tactix PRD,Trijicon RMR/SRO,Swampox Kingslayer/Liberty/Justice red dot Sight

  • This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide. Installing this optic plate requires a qualitied Gunsmith.
  • The included Glock plate fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications..
  • This optic dovetail plate made by ADE only fits genuine/standard glock that has a standard factory rear sight. It does NOT for MOS(optics ready) glock. It does NOT fit glock with AFTERMARKET slide..
  • Compatible with RD3-020 Raptor, RD3-023 Valkyrie, RD3-019 Stingray and Trijicon RMR/SRO(Screws provided for Trijicon and ADE). Also compatible with other red dots that shares the similar footprint, but provided screws may NOT work, such as Holosun HS407C/HS507C/HS508T, Riton X3 Tactix PRD, Trijicon RMR/SRO, Swampox Kingslayer/Liberty/Justice red dot sight. We recommend get the right size screws from a local hardware store..
Check Stock

Kingslayer

  • This listing comes with ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • We have made several improvements since it’s initial release in 2015. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon. The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side..
  • Shock/Fog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax a....
Check Stock

Moscow Drill Barrel Of The Glock (Instrumental) [Explicit]

  • Rear sight pusher will work with 90 degree and 30 degree rear sight profiles. Sig Sauer, H&K, CZ, Glock, S&W, and more..
  • Both side witness windows tool frame to check sight alignment.
  • Sight tool frame can be bolted to, clamped onto work surface, or clamped onto a work vice.
  • Heavy duty Blue Anodized aluminum frame with steel tools.
  • A must-have tool for removal, Installation, and Adjusting windage of dovetailed rear sights for most Semi-Auto Pistol slides..
Check Stock

Patch and NcSTAR Heavy Duty Universal Pistol Dovetailed Rear Sight Pusher Tool Pro Tool

  • Rear sight pusher will work with 90 degree and 30 degree rear sight profiles.
  • Both side witness windows tool frame to check sight alignment.
  • Sight Glock tool frame can be bolted to, clamped onto work surface, or clamped onto a work vice.
  • Heavy duty Blue Anodized aluminum frame with steel tools.
Check Stock

Kingslayer [Blu-ray]

  • This listing comes with ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • We have made several improvements since it’s initial release in 2015. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon. The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side..
  • Shock/Fog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax a....
Check Stock

Xaegistac Glock Tool Set All Metal Magazine Disassembly Tool w/Armorers Punch Tool & Front Sight Installation 3/16 Hex Tool for Glock Accessories GT08

  • HANDY GLOCK TOOL KIT: 1*Mag Disassembly Tool,1* Pin Punch Disassembly Tool,1*Glock Front Sight 3/16" Hex. Compatible with Most Glock Models. A Must....
  • HEAVY DUTY MATERIAL & STRONG HANDLE FOR A LONG SERVICE LIFE: All Metal Construction, Made From Machined Aircraft Aluminum with Steel Handle. Larger....
  • MULTIPURPOSE MAG DISASSEMBLY TOOL (MDT): Safely and Easily Removes All Flat Bottom Magazine Base Plates for Cleaning and Inspection Without Damaging....
  • GLOCK FRONT SIGHT REMOVAL & INSTALLATION COMBO Kit: 3/16" Hex Fits for Glock Front Sight Screws, Pin Punch Disassembly Tool for Removing All Pins on....
  • EASY TO REMOVE AND INSTALL : An Internal Magnet Tip to Easily Hold the Front Sight Screw Securely in Place. Solid and Perfect for Sight Removal or....
Check Stock

Trijicon GL02 Night Sight Installation Tool Kit for Glock Models

  • Installation tool kit for Trijicon Bright & Tough and HD Night sight sets for Glock models.
  • Not compatible with Trijicon Suppressor Sights or Glock 42/43 models.
  • Contents: Rear sight pusher tool and front sight screwdriver for the small retaining screw.
  • Does not work with Trijicon Suppressor Sights.
  • Trijicon night sight tool kit for Glock models.
Check Stock

BASTION Front Sight Tool & Pin Punch Tool Set for Glock | Sight Tool Fits Precisely for Removal & Installation | Pin Punch Makes Field Stripping Super Fast & Easy

  • WHAT YOU GET: 1 GLOCK FRONT SIGHT & 1 PIN PUNCH TOOL (2-in-1 COMBO KIT).
  • the Front Sight Tool works with ALL Glock models.
  • Pin Punch Tool is compatible with the following Glock models: G17 G19 G20 G21 G22 G23 G25 G26 G27 G28 G29 G30 G31 G32 G33 G34 G35 G36 G37 G38 G39..
  • FRONT SIGHT TOOL HAS PRECISE FIT FOR REMOVAL & INSTALLATION: Featuring magnetic tip aluminum driver, our sight tool ensures precise screw removal and installation of Glock front sights. Don’t risk scratching up your Glock with the wrong tool!.
  • PIN PUNCH TOOL MAKES FIELD STRIPPING GLOCK SUPER FAST & EASY: Disassembling your Glock for cleaning and maintenance is essential. Bastion Pin Punch Tool helps remove base plate, locking block, trigger housing, and trigger pins for cleaning or replacement..
  • PREMIUM QUALITY MATERIALS TO LAST | BASTION SIGNATURE WORKMANSHIP: Our punch tool is made of hardened steel tool with black rigid polymer handle. The Front Sight Tool features a Hex wrench, ergonomic injection molded handle, durable black finish, and 3/16″ Hex for sights with a 0.090 hex..
  • BASTION SATISFACTION GUARANTEE: Buy risk-free! Please do reach out to us in case of any issues and we’ll quickly do all we can to make it right..
Check Stock