Top Glock 3slide Plate Reviews

Swampfox Kingslayer Pistol Cut RMR Foot Print 1x22 Micro Reflex Dot Sights 3 MOA (Red Dot)

  • This listing comes with ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • Does NOT fit glock with AFTERMARKET slide with optic cut. We have made several improvements since it's initial release in 2016. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon..
  • The included optic plate for glock also fits Taurus GX4, G3C & G3 with steel rear sights.
  • Waterproof/Shock/Fog Resistant. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture. Fully windage and elevation adjustable and lockable.
  • 5 MOA. 5 Illumination Settings. Powered by a lithium CR2032 battery(Included).
Check Stock

ADE Optic Mounting plate for Glock(Non-MOS,Non-Aftermarket Slide), Taurus GX4,G3C, Canik TP9SF to fit Vortex Venom/Viper, Burris Fastfire, ADE RD3, Sightmark Minishot, Doctor Red dot

  • This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications..
  • Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium), Vortex venom/viper, burris fastfire, meopta, shield, docter, insight Red dots..
  • This optic mounting plate also fits other red dot brands such as Vortex Venom/Razor/Viper, Burris Fastfire,Meopta,Docter, Insight. Does Not fit trijicon rmr/holosun/shield footprint red dots..
  • Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation. We highly recommend DIY only if user has gunsmith experiense, or hiring a gunsmith to install this optic plate. Unprofessional installation such as improper torque will ....
Check Stock

BASTION Magazine Base Plate Butt for Glock 19 17 22 23 26 | Gen 1-5| 9mm .40 .357 .45 Gap | Laser Engraved Black T6 Machined Aluminum Mag Floor Baseplate Bottom Skull

  • BEST QUALITY CUSTOM ALUMINUM MAGAZINE BASE PLATE FOR GLOCK | SUPER EASY & QUICK TO INSTALL: Custom Mag Floor Plate designed to FIT GLOCK GEN 1 2 3 4 5.
  • Bastion’s Magazine Plate hole in center of base plate design snaps perfectly in place allowing you to conveniently personalize your device.
  • made to FITS GLOCK MODELS G17 G19 G22 G23 G24 G26 G27 G31 G32 G33 G34 G35 G37 G38 G39 G45.
  • FOR CALIBERS: 9mm (9X19) .40 .357 .45gap.
  • WON’T RUB OFF, LASER-ENGRAVED HIGH-RESOLUTION ALUMINUM (NOT PAINTED ON) MAG PLATE FOR GLOCK: ‘Laser-Engraved’ makes a huge difference! Unlike other customs Magazine base for Glock that is painted on or stickers, Bastion LASERED & ENGRAVED this artwork so that it will not rub off or wear off over time..
  • PREMIUM HARD COAT ANODIZED T6 MACHINED ALUMINUM METAL: Premium quality for Glock accessories that are machined from the highest quality, hard coat anodized black T6 aluminum that stays tough and durable even when removed and replaced from time to time, giving you the extreme durability you deserve..
  • FANTASTIC REPLACeMENT FOR PLASTIC FACTORY PART: Swap Out / Replace factory parts. You will love the quality of Bastion products. Many different designs to choose from. We also offer custom engraving! *IMPORTANT NOTE – Basti....
Check Stock

Ade RD3-009-MOS Red Dot Reflex Sight for Glock MOS 17 19 34 35 40 41 Pistol Handgun

  • Fits Optics Ready Pistol such as Glock MOS System such as Gen4 17,19,34,35,40,41,43,43x and also fit Springfield OSP(non-hellcat), Canik TP9 SFX/Elite Combat(non elite sc), Walter PPQ Q5 Match, FNX 45 Tactical, IWI Masada handguns that come with mounting plates that marked for DOCTOR/VORTEX VENOM type red dot.
  • All mentioned above pistols must to be OPTICS READY model that comes with MOUNTING PLATE marked for DOCTOR/VORTEX. If not, user has to purchase after market mounting plate(not included with this red dot sight purchase) to replace the rear sight. For Non-MOS(non-optics ready) glock, search part number B01L9734Y6 on amazon for optic plate..
  • This red dot does NOT fits glock with AFTERMARKET/Non-Genuine Glock slide with custom optic cut for RMR because the footprint is different. 5 MOA. 5 Illumination Settings. Powered by a lithium CR2032 battery(Included).
  • Comes with an Picatinny mounting plate. It does not comes with any other red dot mounting plate for a specific handgun, user need to purchase the plate separately for the plate made for the specific handgun..
  • Waterproof for 30mm under 3ft water. Shock/Fog Resistant.
Check Stock

Squirrel Daddy Personalized Slide Rear Cover Back Plate Custom for Glock 19 17 gen 3 4

  • Permanently laser marked on the Glock back plate, it will not wear off.
  • 100% made in USA back plate for most Gen 3 and 4 Glock only.
  • Custom marked with up to 3 lines of ARIAL FONT as normally typed on the keyboard permantly marked onto the rear plate.
  • Compatible with all Glock Models: Glock G17, G19, G20, G21, G22, G23, G25, G26, G27, G28, G29, G30, G31, G32, G33, G34, G35, G36, G37, G38, G39.
Check Stock

BASTION Magazine Base Plate Butt for Glock 19 17 22 23 26 | Gen 1-5 | 9mm .40 .357 .45 Gap | Laser Engraved Black T6 Machined Aluminum Mag Floor Baseplate Bottom (3 Numbered USA Flag)

  • BEST QUALITY CUSTOM ALUMINUM MAGAZINE BASE PLATE FOR GLOCK | SUPER EASY & QUICK TO INSTALL: Custom Mag Floor Plate designed to FIT GLOCK GEN 1 2 3 4 5.
  • Bastion’s Magazine Plate hole in center of base plate design snaps perfectly in place allowing you to conveniently personalize your device.
  • made to FITS GLOCK MODELS G17 G19 G22 G23 G24 G26 G27 G31 G32 G33 G34 G35 G37 G38 G39 G45.
  • FOR CALIBERS: 9mm (9X19) .40 .357 .45gap.
  • WON’T RUB OFF, LASER-ENGRAVED HIGH-RESOLUTION ALUMINUM (NOT PAINTED ON) MAG PLATE FOR GLOCK: ‘Laser-Engraved’ makes a huge difference! Unlike other customs Magazine base for Glock that is painted on or stickers, Bastion LASERED & ENGRAVED this artwork so that it will not rub off or wear off over time..
  • PREMIUM HARD COAT ANODIZED T6 MACHINED ALUMINUM METAL: Premium quality for Glock accessories that are machined from the highest quality, hard coat anodized black T6 aluminum that stays tough and durable even when removed and replaced from time to time, giving you the extreme durability you deserve..
  • FANTASTIC REPLACeMENT FOR PLASTIC FACTORY PART: Swap Out / Replace factory parts. You will love the quality of Bastion products. Many different designs to choose from. We also offer custom engraving! *IMPORTANT NOTE – Basti....
Check Stock

Kingslayer

  • This listing comes with ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • We have made several improvements since it’s initial release in 2015. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon. The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side..
  • Shock/Fog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax a....
Check Stock

ADE Zantitium RD3-015 Red Dot Sight + Rear Sight Optic Mounting Plate/Adapter for All Glock (Non-MOS,Non-Aftermarket Slide) Standard, Canik TP9SF and Taurus GX4/G3C/G3 with Factory Steel Sight Pistol

  • This listing comes with ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • Ade Advanced Optics model RD3-006, RD3-009, RD3-012, RD3-013, RD3-015 are designed to fit the slide/footprint of mounting plate made for Vortex Venom, Burris Fastfire, Meopta, Docter, Insight, Eotech MRDS, Sightmark Minishot. Therefore Ade red dots are compatible for varieties of handguns with appropriate plate that is made for any of those brands..
  • New advanced battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low setting with a CR2032 Batte....
Check Stock

Kingslayer [Blu-ray]

  • This listing comes with ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • We have made several improvements since it’s initial release in 2015. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon. The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side..
  • Shock/Fog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax a....
Check Stock

ADE Bertrillium RD3-013 Red Dot+Rear Sight Optic Mounting Plate/Adapter for All GLOCK (Non-MOS,Non-Aftermarket Slide) Standard models,Canik TP9SF and Taurus GX4,G3C&G3 with factory steel sights pistol

  • This listing comes with ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • New advanced battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low setting with a 1632 Battery(Included)Ade Advanced Optics model RD3-006, RD3-009, RD3-012, RD3-013, RD3-015 are designed to fit the slide/footprint of mounting plate made for Vortex Venom, Burris Fastfire, Meopta, Docter, Insight, Eotech MRDS, Sightmark Minishot. Therefore Ade red dots are compatible for varieties of handguns with appropriate plate that is made for any of thos....
Check Stock

ADE RD3-006x Green Dot + Rear Sight Optic Mounting Plate/Adapter for All Glock (Non-MOS, Non-Aftermarket Slide) Standard Models, Canik TP9SF and Taurus GX4, G3C & G3 with Factory Steel Sights Pistol

  • This listing comes with ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • We have made several improvements since it's initial release in 2015. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon. The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side..
  • Shock/Fog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax and....
Check Stock

BASTION for Glock Gen 1 Thru 5 Models G17 G17L G19 G19X G20 G21 G22 G23 G24 G26 G27 G29 G30 G31 G32 G33 G34 G35 G36 G37 G38 G39 G40 G41 G45 | Engraved Back Rear Cover Plate | USA Flag

  • PREMIUM QUALITY GLOCK BACK PLATE , PERFECTLY FITS Gen 1, 2, 3, 4, 5 ONLY: This Glock Rear Cover Plate is designed to fit Glock G17, G17L, G19, G19X, G20, G20SF, G21, G21SF, G22, G23, G24, G26, G27, G29, G29SF, G30, G30SF, G30S, G31, G32, G33, G34, G35, G36, G37, G38, G39, G40, G41, G45.
  • Glock Butt Cover Back Plate that’s made to snap perfectly in place allowing you to conveniently personalize & enhance your Glock’s aesthetic, and set it apart from the rest..
  • NOT COMPATIBLE WITH G42, G43, G43X or G48. WON’T RUB OFF, LASER-ENGRAVED HIGH RESOLUTION ALUMINUM (NOT PAINTED ON) SLIDE COVER PLATE FOR GLOCK: ‘Laser-Engraved’ makes a huge difference! Unlike stickers or other custom Rear Cover Plates for Glock that are painted on, Bastion LASERED & ENGRAVED this artwork so that it won't rub off or wear off over time..
  • MADE IN THE USA, PREMIUM HARD COAT ANODIZED T6 MACHINED ALUMINUM: Premium quality Butt Plate for Glock that’s machined from the highest quality, hard coat anodized black T6 aluminum that stays tough and durable even when removed and replaced from time to time, giving you the extreme durability, you deserve..
  • STANDOUT CUSTOM LOOK, FANTASTIC REPLACEMENT FOR OEM PLASTIC FACTORY PART: Not only keeps your firing....
Check Stock

SAWKE Glock Sight Mount Plate - Glock 17 19 22 23 26 27 34 Mounting Plate Mini Red Dot Sight,Glock Mount Plate Red dot Burris Sightmark Vortex

  • CAUTION: Not fit for RMR, RMS, DOCTOR and Glock m.o.s. system. NOT fit Glock 19 mos..
  • Glock red dot base plate fits Glock 17 19 22 23 26 27 31 34 35..
  • This glock red dot mount fits Ade Advanced Optics rd3-001, rd3-02, rd3-009, rd3-006a and Sightmark mini shot reflex sight..
  • Fits Vortex/Viper/Venom, Burris Fastfire micro red dot sight..
  • Attaches firmly to your pistol for excellent performance in tactical situations Replace the rear sight slot with mini red dot base plate..
Check Stock