Top Glass Print Bed Surface Reviews

HICTOP Upgraded New Version Ender 3 pro Glass Bed One Side Tempered Glass Bed 235x235 for Ender 3 Ender 3 Pro Ender 5 CR-20 Pro 3D Printer (235 * 235)

  • HICTOP Ender 3 pro glass bed is coated on one side and the coat material is better than the both sides one, it is much more stable and not easy to remove. We can send you new one for free if it peels off in 3 monthes.
  • Excellent adhesion when the temperature of the heated bed is about 50℃, you can print directly on the HICTOP glass bed without using any glue or other tools to help the model to stick on to the bed. You do not need to worry about the prints curling if the temperature of the hot bed is no less than 50℃.
  • It is super easy to remove the models when the temperature of the glass goes back to room temperature, you do not need to use removal tools even if you are printing big model on our HICTOP glass bed. Please do not try to remove the model before the plate cools to room temperature..
  • The size of HICTOP glass bed is 235*235mm（9.25*9.25inch）, it can work with Creality 3D printers such as the Ender-3 Pro, Ender-3 V2，Ender-3, Ender-3S, Ender-3X, Ender-5, Ender-5 Pro，CR-20, CR-20 Pro and other similarly sized printers..
  • The surface of HICTOP glass bed is smooth without ripples, and there is no residue after the model is removed, it is also more durable than a super plate surface..
Check Stock

HICTOP Flexible Steel Platform with PEI Surface and Magnetic Bottom Sheet with Adhesive 235x235mm for Ender-3 Pro, Ender-3 V2，Ender-3 3D Printers

  • The HICTOP PEI sheet is combined with 2 parts, a flexible steel platform coated with PEI surface and a magnetic bottom sheet with adhesive on the back. The PEI comes pre applied..
  • The HICTOP PEI sheet is very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 130℃ on the bed..
  • Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, you can print directly on the HICTOP PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60℃ bed temperature. It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85℃.
  • Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it..
  • The size of HICTOP glass bed is 235*235mm（9.25*9.25inch）, it is applicable with Creality 3D printer such as Ender-3 Pro, Ender-3 V2，Ender-3, Ender-3S, Ender-3X, Ender-5, Ender-5 Pro，CR-20, CR-20 Pro and similarly sized machines..
Check Stock

HICTOP CR-10 Glass Bed Double Sided Upgraded Tempered Glass Bed 310x310mm for CR-10 CR-10S CR-10S pro V2 3D Printer

  • HICTOP CR-10s pro glass bed is coated on both sides and both sides can be used. Buying one plate gets you two usable sides, doubling your value.
  • Excellent adhesion when the temperature of the heated bed is about 50℃, you can print directly on the HICTOP glass bed without using any glue or....
  • It is super easy to remove the models when the temperature of the glass goes back to room temperature, you do not need to use removal tools even if....
  • The size of HICTOP glass bed is 310*310mm（12.2*12.2 inch）, it can work with Creality 3D printers such as the CR-10, CR-10S, CR-10S pro, CR-10 V2,....
  • The surface of HICTOP glass bed is smooth without ripples, and there is no residue after the model is removed, it is also more durable than a....
Check Stock

HICTOP Ender 3 v2 Upgrades Flexible Build Plate PEI Steel Sheet 235x235mm Works for Ender 3/Ender 3 Pro/Ender 5 3D Printers

  • Hight Flatness/long lasting :Improved HICTOP PEI plate provides more flat and more smooth build surface than other plate, ensuring high flatness for the bottom of model.long lasting，The service life of our pei is 10 times longer than other Glass Bed.
  • easy to use/Easy to clean： simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 130℃ on the bed.It can be cleaned easily with water or alcohol.
  • New upgrade: movable, magnetically fixed construction surface, model can be easily removed. Say goodbye to disassembly tools, shovels and knives. Reduce workload and save time.
  • No Edge Curling/Strong adhesion： The HICTOP PEI sheet is molds could stick on bed firmly without glue, avoiding the issue of print edges curling.Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, without using any glue or other tools to help the model to stick onto the sheet.
  • Packing: Textured steel platform coated with PEI surface *1 magnetic bottom sheet with adhesive on the back *1.
Check Stock

Creality 3D Open Source CR-10 3D Printer All Metal Frame 12x12x15.5 Inch Build Volume and Heated Bed Includes Glass Bed (Blue and Orange Decorative Strips are Given Randomly)

  • ... The POM engineering thermo-plastic "Triangle-Slot" wheels provide excellent dimensional stability even during extended use. Elimination of metal-on-metal steel rods cuts noise down dramatically..
  • GLASS BED: This printer comes stock with a reliable and flat glass bed. Forget about other printers with uneven printing surfaces and warped beds. This glass bed ensures a 100% usable and flat surface for any print from the smallest test file to the largest model. An absolute necessity when dealing with such a large build space, print from corner to corner and get perfect layer lines every time..
  • WARRANTY: Our experienced 3D printing engineers are available 24/7 to offer you lifetime technical support as well as our 1-Year limited manufacturers replacement part. If you are not satisfied with the results of your prints, contact us and we will work with you to provide assistance until you are printing like a pro!.
  • MORE CHOICE: Supports multiple 3D printing filaments: ABS / PLA / TPU and so on.
  • EASY TO ASSEMBLE: Further simplified structure means fast assembly and easy adjustment, which saves you both time and energy and simple and suitable for DIY customers.
  • ENHANCED STABILITY AND RELIABILITY: aluminum plate ensures more stable printing.
Check Stock

Creality Original Self Release Glass Bed Upgrades for Ender 3 / Ender 3 pro/Ender 5 / Ender 3 v2 3D Printer 235x235mm Build Surface Plate Heated Bed Better Than Borosilicate Glass Accessories

  • New Creality 3D printer Self Realising Glass Bed - Using a special microporous coating help release prints when the build plate cools, and there is no....
  • Prints stick firmly to the bed without any glue or hairspray. Just heat the bed to the temp you usually print PLA, PETG, or ABS, and the print will....
  • Save time and hassle of wiping the build plate of glue, unlike normal Borosilicate Glass. The perfect 3d printers accessories for all Creality....
  • Super Flat for the perfect first layer - Unlike magnetic bed sheet or PEIsticker, which can be tricky when leveling and doesn't work at all....
  • The Self Release Glass Bed is secured to the printer using middle-size clips available at all office supply stores and unlike Magnetic Spring Steel,....
Check Stock

Comgrow Creality 3D Printer CR-10 V3 New Version and Firmware Upgrade Silent Mainboard Resume Printing 300x300x400mm with Meanwell Power Supply Support DIY Ex

  • ... The unique Bowden extruder design reduces the weight on the X-axis which delivers better performance even on very tall prints..
  • 【GLASS BED】✔️he reliable and flat glass bed can make the model easier to adhere to when printing, and easy to remove after cooling. Forget about other printers with uneven printing surfaces and warped beds. This glass bed ensures a 100% usable and flat surface for any print from the smallest test file to the largest model. An absolute necessity when dealing with such a large build space, print from corner to corner and get perfect layer lines every time..
  • 【24V/350W MEANWELL POWER SUPPLY】✔️Equipped with solid 24V/350W Meanwell power supply pairs with thermally efficient bed heater. It allows for rapid heating to 100.
  • 【OPEN SOURCE】✔️ In the spirit of innovation and progress, we have decided to make our firmware and design plans available to all for extensive modding and improvements. We hope to create a large community of users who contribute to the project ultimately resulting in a better product for all..
  • 【HIGH QUALITY】✔️All aluminum frame provides a sturdy base meant to last for years. The POM engineering thermo-plastic "Triangle-Slot" wheels provide excellent dimension....
Check Stock

3 Pack 16'x16' (400mmx400mm) Square 3D Printing Build Surface Heat Bed with Adhesive for 3D Printers, Cuttable to Any Size

  • ...16" x 16" (400mm x 400mm) square, fully matches heated bed on many popular 3D printers, such as Cr-10 S4, Formbot T-rex, Wombot Modus 3D printer, Creatbot, Tevo Black Widow, and also can cut to any small size you want..
  • 【High Quality Material】High strength and heat resistance (up to 240°C) allows the 3D Printer surface to perform consistently in high temperature environments. The durability is similar PEI sheet but the price is much affordable than PEI. This hot bed sheet is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print. And this 3d build plate is also inherently flame resistant and low in smoke production..
  • 【Easy to Install and Remove】Thick 1mm building plates will not warp or bend under heat. It is used on top of your heated print bed and provides excellent results. Simply remove the 3M adhesive paper on back side then stick it on your heat bed. Or fix it just with clip around the edges. Print directly on to the building surface without the need for additional adhesives, tapes, or slurry..
  • 【Fully Compatibly】 This 3D Printer heatbed platform sheet allows for multiple uses with either the same or different filament material. Compatible with ABS, PLA, HIPS, PET+, brick, wood,....
Check Stock

Glass Bed, Upgraded 3D Printer Platform Tempered Glass Plate Build Surface Cover for Anet A8 /A6/ A2/ ET4 (220x220x4mm)

  • BED MATERIAL-100% Genuine Borosilicate Glass is coated with inorganic microporous coating and has a hardness of 8 Mohs, heat resistance up to 400 ℃..
  • BUILD SURFACE TEMPERATURE SETTINGE- PLA: 50-70ºC TPU: 50-70ºC ABS: 100-125ºC (recommended 110ºC) PC: 100-130ºC (120ºC is recommended) Nylon: 90-120ºC (110ºC is recommended) PP: 100-130ºC (120ºC is recommended) PETG: 50-70ºC.
  • SIZE&COMPATIBILITY-Build Surfaces have 4 different size to choose 220x220x4mm Works for Anet A8 /A6/ A2/ ET4,235x235x4MM Works for CREALITY Ender3 300x300x4MM Works for Anet E12 E16 A8PLUS ET5 Artillery SW-X1 310x310x4MM Works for CREALITY CR10.
  • NO EDGE CURLING - 3D printer coated glass bed, molds could stick on bed firmly without glue, avoiding the issue of print edges curling. A necessary 3d printer upgrade parts..
  • QUANLITY ASSURANCE-All products in this shop provide free lifetime service.
Check Stock

Comgrow Textured/Smooth Double Sided PEI Sheet 235mmx235mm for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 S1/Ender 3 S1 Pro/Ender 3 Neo/Ender 3 V2 Neo/Voxelab Aquila 3D Printer

  • ✔️ 【Simple Installation】✔️ The Ender 3 V2 PEI sheet is combined with 2 parts, a flexible steel platform textured PEI surface on one side, smooth PEI on the other side and a magnetic bottom sheet with adhesive on the back. Simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top..
  • ✔️ 【Excellent Adhesion】✔️ Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, you can print directly on each side of the double sided PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60℃ bed temperature.It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85℃..
  • ✔️ 【Wide Application】✔️ We use 75% thicker PEI and 25% thicker spring steel than our leading competitors. This means a more durable plate that can handle the tough conditions of 24/7 printing. Our magnet can also sustain higher temperatures of 120°C, making it perfect for materials like PLA, PETG, ABS, TPU, ASA, Nylon, and Polycarbonate!.
  • ✔️【Easy Removal】✔️ This surface is easily removed and flexible. Prints come off the surface easily wh....
Check Stock

3D Printing Build Surface, 3D Printer Heat Bed Platform Sticker Sheet, 12' x 12' Square with Premium Adhesive for CR-10 / CR-10S,Hictop CR-10, Hictop Hero d3 3D Printers 310x310MM (Pack of 4)

  • 【PACK of 4】Our 3D Printer build surface Platform Sticker Sheet are 12″ x 12″ (310mm x 310mm) square, fully matches heated bed on many popular 3D printers. Fits: Creality CR-10S/CR-10, Hictop CR-10, Hictop Hero d3, JG Aurora A5 and A5x, Artillery Sidewinder X1/X2, Folger Tech FT-5, Creative3D Elf CoreXY, SainSmart Coreception CoreXY, BIQU Thunder, ADIMLab Gantry, Wanhao D9 (300), Tenlog TL-D3 PRO, Sunlu S8, JGMaker Artist-D Dual Extruder, and also can cut to any small size you want..
  • 【High Quality Material】High strength and heat resistance (up to 240°C) allows the 3D Printer surface to perform consistently in high temperature environments. The durability is similar PEI sheet but the price is much affordable than PEI. This hot bed sheet is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print. And this 3d build plate is also inherently flame resistant and low in smoke production..
  • 【Easy to Install and Remove】Thick 1mm building plates will not warp or bend under heat. It is used on top of your heated print bed and provides excellent results. Simply remove the 3M adhesive paper on back side then stick it on your heat bed. Or fix it just with clip around the edges. Print directly on....
Check Stock

Creality Ender 3 Glass Bed Upgraded 3D Printer Tempered Glass Plate Build Surface for Ender 3/Ender 3 Pro/Ender 3 V2/Ender 5/Ender 5 Pro/Ender 3 S1, 235x235x4mm

  • Compatibility: Our glass bed is applicable for Creality 3D printer Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3S, Ender 3X, Ender-5, CR-20, CR-20 Pro and most of the Cartesian style 3D printer with a MK2 MK3 hot bed. Please confirm the size of your printer’s platform firstly..
  • No Edge Curling: The composite coating of our tempered glass bed has super strong adhesion after heating, prints can be sticked on the build surface firmly without glue, avoiding the issue of prints edges curling. Equipped with 4 clips to fix the hot bed..
  • Super Convenient: It is very easy to remove the prints. The surface of our tempered glass bed is a layer of microporous composite coating. It will contract as the hot bed cooling which greatly ensures the prints can be removed manually without any tools..
  • Excellent Flatness: Upgraded ender 3 build plate with smaller CREALITY logo provides flatter and smoother build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of mold during 3D printing..
  • High Grade Material: Made of 100% Genuine Borosilicate Glass, thick and high quality. Glass bed’s hardness is up to 8 Mohs and is capable to work up to 400 ℃. Using alcohol or acetone to wipe it after repeated use..
Check Stock

Artillery Sidewinder X2 3D Printer, SW-X2 Newest Model 95% Pre-Assembled Ultra-Quiet Rapid Heating Dual Z System Filament Runout Detection Resume Printing 300x300x400mm

  • Exclusive Ultra-Quiet Stepper Driver - Low decibel even working at fast speeds. With a 300 x 300 x 400 mm build volume. All in one structure, 95% pre-assembly..
  • Synchronized Dual Z System - Ensure the X carriage always move parallel to the build plate, Increase printing stability. Intelligent automatic bed leveling, precise testing, efficient..
  • Rapid Heating AC Heat Bed - Lattice glass smooth surface, prints smoothly, easy release of printed objects. Fast and stable heating to 110 ℃ in 2 minutes..
  • Direct Drive Extruder- 150 mm/s fast print speed, makes high quality print, especially for flexible filament..
  • Resume Printing - 3d printer has filament runout detection and recovery. If power is lost, prints can be resumed from the last layer, saving time and money..
Check Stock