Top Glass And Tile Cutting Bit Reviews

30Pcs Diamond Drill Bits Glass Hole Saw Drill Bit Set Cutting Remover Tools for Glass Porcelain Tile Ceramic Marble Granite Bottles DIY(6mm-50mm)

  • ..., 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 25mm, 28mm, 30mm, 35mm, 40mm, 45mm,50mm, 16pcs hole saw drills + 14pcs 6mm Hole opener.
  • [Supreme Quality]: These diamond drill bits are made of industrial grade carbon steel with nickel-plated coated body to resist corrosion. A thicken diamond coating on the tops offers superior cutting strength for maximum drilling outcomes.
  • [Applicable Method]:1,Install the drill bit on a drill such as a hand drill.2,Since the hole opener does not have a central positioning bit, the hole is tilted at 45 degrees during operation, the speed of the drill is slowed down, and the glass and the stone are slowly contacted.3,When a glass or stone appears in a crescent (the crescent is positioned), then the vertical drill begins to work..
  • [Precautions]:1,Cool the drill bit with water when opening the hole. Good cooling can extend the applicable life of the drill bit. Do not dry the drill without adding water. Otherwise, the drill bit may be damaged.2,Choose the processing materials, do not apply to tempered glass drilling..
Check Stock

Glass Drill Bit Set,5 pcs Diamond Bits Hole Saw Bottle Extractor Remover Tool for Ceramics,6-14mm Set Drilling Granite Porcelain Tiles Pot Lamp Quartz Slate Pieces Fish Tank Pack Coated Grit

  • 【EXTREME HARD 】These diamond drill bits are made of industrial grade carbon steel with nickel-plated coated body to resist corrosion. A thicken diamond coating on the tops offers superior cutting strength for maximum drilling outcomes..
  • 【EXTRAORDINARY SHARP】Each diamond hole saw has a smooth and exact finish that lower the incision resistance and drill pressure, increases the sharpness, and effectiveness of water lubrication. Excellent for making clean and precise holes on glass or ceramic and considerably extending drill bit life..
  • 【LARGE CLEARANCE HOLE】These glass hole saw set along the drill bit facilitate the entrance of cooling water and escape of chips and other particles from drilling. Makes the drilling process easier..
  • 【WIDE USAGE】5 varied size drill bits Included with this glass drill bit set to meet various demands. Perfect for drilling glass, tile, porcelain tile, ceramic tile, brick, and stone..
  • 【100% Satisfaction Guaranteed】We are committed to making sure that you have a satisfying purchase experience, so if you have any questions or sugguestions, please contact us.(Log in to your account, check the order ID and click "Contact Seller" to contact us.).
Check Stock

Masonry Drill Bits Set (11PCS),Concrete Drill Bit Set for Glass,Tile, Brick, Cement, Concrete, Plastic, Cinder Block, Wood etc with Industrial Strength Carbide Tip,1/8\-1/2\ by amoolo

  • 【 11 PIECES SATISFY ALL YOU DEMAND】Masonry Drill Bit Set includes : 1/8" (3"Length*2), 1/4" (4"Length*2), 1/4" (6"Length*2), 5/16 (6"Length*2), 3/8" (6"Length*2), and 1/2" (6"Length*1)..
  • 【DURABLE INDUSTRIAL GRADE CARBIDE TIPS】amoolo Carbide Drill Bit Set are built for longevity excellent abrasion resistance, will stay sharper and make the drilling much more easier ；Drilling faster holes in bathroom tiles, or wall mirrors..
  • 【CUT PERFECT CIRCLES HOLES】U type slot design with fast drilling dust remove；3-flats shank allows drill bit to be held tightly and stably in power drill；Spiral shank increases cutting speed and prevents slipping,Please cooling with water and control the speed when drilling, then dry the water or apply the oil to prevent rusting after used..
  • 【MULTIPLE APPLICATION】Masonry Tile Drill Bit Set for use with electric or cordless hammer drills, Ideal for fast and efficient drilling through TILE, BRICK, CEMENT, CONCRETE, GLASS, PLASTIC, CINDERBLOCK, WOOD etc.×NOT for tempered glass drilling( (e.g. car glass)).Cannot be used on tempered glass (e.g. car glass)..
  • 【 WARRANTY 】If you are not fully satisfied for any reason, please contact us via Amazon for 100% refund or replacement..
Check Stock

10PCS 1/4 Inch carbide drill Tile Glass bit for Glass, Concrete, Marble, Plastic, Brick, Tile, Wood and Cement,etc

  • 【HIGH HARDNESS, DURABLE】High quality Tungsten carbide, and carbide with a reinforced head that prevents bit cracking and provides a longer life,the hardness is higher than the ordinary drill bit..
  • 【UNIQUE DESIGN】One drill bit replaces two drill bits (1 x glass & tile drill bit + 1 x Masonry drill bit), can easily drill holes on tile, concrete, brick, glass, ceramic, plastic, wood, etc.The U type slot design brings fast drilling dust remove, and 3-flats shank allows drill bit easy plug and to be held tightly..
  • 【WIDE APPLICATIONS】Spear pointed design strong tungsten carbide tip can easily penetrate various material, suitable for masonry wall, cement wall, concrete, tile, wood, metal, stainless steel, aluminum alloy, wood, bubble brick, etc..
  • 【10-PIECE DRILL BIT SET】The package includes 10pcs 1/4 Inch (6mm) glass and tile drill bits and a plastic storage box, easy to carry..
  • 【NOTE】When drilling hard material (glass, porcelain floor tile, marble or granite), please use water for lubrication..
Check Stock

PHITUODA 15pcs 5/16-Inch / 8mm Diamond Drill Bits, Small Diamond Hole Saw Hollow Core Drill Bits for Glass Ceramic Porcelain Tiles Marble Granite Quartz

  • Package Included: 12 x Diamond Drill Bits. Cutting Hole Diameter is 5/16" / 8mm, Shank Diameter is 7/32" / 5.49mm, Total Length is 2" / 50.9mm..
  • Quality Selection: These diamond drill bits are made of high-speed steel which is high quality and durable. With a nickel-plated coated body to resist corrosion, which has a long service life..
  • Smoothly Cutting: A thicken diamond dust coating on the tops offers superior cutting strength for creates a high precision, smooth cut with no broken edges. Reduced drill speeds, low drill pressure, and increased use of water lubrication will extend drill bit life considerably..
  • Multiple Applications: The diamond drill bit can remove a complete 8mm diameter hole on glass, tiles, granite, ceramic. In addition to cutting holes for glass, the Hole Saw comes in handy for tile bottles, blocks jars, fiberglass, porcelain tile, ceramic, slate, marble, light stone. Not for use on Concrete or for depths beyond about 1/2"..
  • Hassle-Free Guarantee: PHITUODA's products can only be packed and shipped after strict quality inspection. If you are not satisfied within 90-days, send 1 simple email and receive a 100% money-back refund. We're so confident you will love our products like our other 5-star reviewers! You will be amazed at the cu....
Check Stock

PHITUODA 6 Inch / 150mm Diamond Drill Bits, Large Diamond Hole Saw Hollow Core Drill Bits for Glass Ceramic Porcelain Tiles Marble Granite Quartz

  • *Package Included: 1 x Diamond Drill Bits. Cutting Hole Diameter is 6" / 150mm, Shank Diameter is 3/8" / 9.6mm, Total Length is 2.22" / 56.35mm..
  • *Quality Selection: These diamond drill bits are made of high-speed steel which is high quality and durable. With a nickel-plated coated body to resist corrosion, which has a long service life. Large chip holes to ensure that when the punching smooth, punching accurate..
  • *Smoothly Cutting: A thicken diamond dust coating on the tops offers superior cutting strength for creates a high precision, smooth cut with no broken edges. Reduced drill speeds, low drill pressure, and increased use of water lubrication will extend drill bit life considerably..
  • *Multiple Applications: The diamond drill bit can remove a complete 150mm diameter hole on glass, tiles, granite, ceramic. In addition to cutting holes for glass, the Hole Saw comes in handy for tile bottles, blocks jars, fiberglass, porcelain tile, ceramic, slate, marble, light stone. Not for use on Concrete or for depths beyond about 1/2"..
  • *Hassle-Free Guarantee: PHITUODA's products can only be packed and shipped after strict quality inspection. If you are not satisfied within 90-days, send 1 simple email and receive a 100% money-back refund. We're so confident you ....
Check Stock

PHITUODA 1-3/4 Inch / 45mm Diamond Drill Bits, Diamond Hole Saw Hollow Core Drill Bits for Glass Ceramic Porcelain Tiles Marble Granite Quartz

  • *Package Included: 1 x Diamond Drill Bits. Cutting Hole Diameter is 1-3/4" / 45mm, Shank Diameter is 3/8" / 9.8mm, Total Length is 2.18" / 55.4mm..
  • *Quality Selection: These diamond drill bits are made of high-speed steel which is high quality and durable. With a nickel-plated coated body to resist corrosion, which has a long service life. Large chip holes to ensure that when the punching smooth, punching accurate..
  • *Smoothly Cutting: A thicken diamond dust coating on the tops offers superior cutting strength for creates a high precision, smooth cut with no broken edges. Reduced drill speeds, low drill pressure, and increased use of water lubrication will extend drill bit life considerably..
  • *Multiple Applications: The diamond drill bit can remove a complete 45mm diameter hole on glass, tiles, granite, ceramic. In addition to cutting holes for glass, the Hole Saw comes in handy for tile bottles, blocks jars, fiberglass, porcelain tile, ceramic, slate, marble, light stone. Not for use on Concrete or for depths beyond about 1/2"..
  • *Hassle-Free Guarantee: PHITUODA's products can only be packed and shipped after strict quality inspection. If you are not satisfied within 90-days, send 1 simple email and receive a 100% money-back refund. We're so confident you....
Check Stock

ZRM&E 8pcs 14mm Laboratory Keck Clamp Plastic Lab Keck Clips for Glass Standard Conical Interface Clip Ground Glass Joint, Green

  • 【Glass Drill Bit】These diamond drill bits are made of industrial grade carbon steel with nickel-plated coated body to resist corrosion. Fine workmanship and super wear-resistant, sharp.
  • 【High Quality Drill】Each hole is treated with smooth and accurate surface treatment,and the top oh the hole is thickened to achieve excellent cutting strength.
  • 【Tile Hole Saw 15 Sizes】 6/ 8/ 10/ 12/ 14/ 16/ 18/ 20/ 22/ 25/ 26/ 28/ 30/ 40/ 50 mm，to meet various demands.
  • 【Wide Usage】Used on Drill Glass,Wood,Tile Bottles,Blocks Jars, Ceramic,Slate Mable, Granite Light Stone, and other hard surfaces.
  • 【Attention】Please keep adding water when the diamond drill bits are working on the glass or ceramics.low drill pressure and increased use of water lubrication will extend drill bit life..
Check Stock

Dry Diamond Drill Bits 1/4" 6mm Diamond Hole Saw for Ceramic Porcelain Tile Glass Stone Marble Granite,Masonry Drill Bits Vacuum Brazed Diamond Core Drill Bit Kit for Bottles,Pots

  • 【DRILLING NEEDN'T WATER 】:Tile drill bits can be used without water,because tile dry diamond drill bits integrated with wax lubricant inside which melts while dry drilling and cools the cutting surface.
  • But water can be used as additional cooling to prolong the life of tile drill bits.
  • 【Apply to】:The diamond drill bits Great for drilling clean holes to hard materials especially tiles, porcelain ground, granite ceramic glass mirror marble stone masonry brick, Note: not for wood.
  • 【Wide compatibility】Diamond coating enhances the drilling speed.
  • Ceramic tile drill bits is hex shank which is compatible with electric drill,hand drill,bench drill, angle grinder and vacuum brazed diamond technology provide more durable and long life.
  • 【SUSUMU SERVICE】:If you are not satisfied with our porcelain tile drill bits, please contact SUSUMU, will be 100% MONEY BACK GARRANTEE.If you are not satisifed with diamond tipped drill bit, you could return diamond tip drill bit for a full refund without hassle.Buy with confidence and complete peace of mind..
Check Stock

PHITUODA 4-1/2 Inch / 115mm Diamond Drill Bits, Large Diamond Hole Saw Hollow Core Drill Bits for Glass Ceramic Porcelain Tiles Marble Granite Quartz

  • *Package Included: 1 x Diamond Drill Bits. Cutting Hole Diameter is 4-1/2" / 115mm, Shank Diameter is 3/8" / 9.6mm, Total Length is 2.19" / 55.6mm..
  • *Quality Selection: These diamond drill bits are made of high-speed steel which is high quality and durable. With a nickel-plated coated body to resist corrosion, which has a long service life. Large chip holes to ensure that when the punching smooth, punching accurate..
  • *Smoothly Cutting: A thicken diamond dust coating on the tops offers superior cutting strength for creates a high precision, smooth cut with no broken edges. Reduced drill speeds, low drill pressure, and increased use of water lubrication will extend drill bit life considerably..
  • *Multiple Applications: The diamond drill bit can remove a complete 115mm diameter hole on glass, tiles, granite, ceramic. In addition to cutting holes for glass, the Hole Saw comes in handy for tile bottles, blocks jars, fiberglass, porcelain tile, ceramic, slate, marble, light stone. Not for use on Concrete or for depths beyond about 1/2"..
  • *Hassle-Free Guarantee: PHITUODA's products can only be packed and shipped after strict quality inspection. If you are not satisfied within 90-days, send 1 simple email and receive a 100% money-back refund. We're so confident y....
Check Stock

Keadic Glass Tile Cutter Tool Kit, Glass Breaking Pliers, Tile Cutter Hand Tools Set with 6mm Alloy Steel Blades, Spacers, Special Oil Bottles Tape Measure & Cut-resistant Gloves

  • Complete Glass & Tile Cutter Tools Set --- In this easy glide glass & tile cutter hand tools kit, you can get 1 glass tile cutter & 2 pieces 6mm premium alloy steel blades, 1 glass breaking plier & 3 spare spacers, 2 special oil bottles, 1 meassuring tape (1m/3 FT) and 1 pair of cutting-resistant gloves. Everything you need to cut glass, tile, mosaic, mirrors, diamond & minerals are included!.
  • Warm Tips --- The glass tile cutter tools can be used for cutting glass, mirrors, wall tiles, facing tiles, ordinary whole tiles, glazed tiles within 0.47 inches, but not for cutting whole body tiles, vitrified tiles, marble tiles and polished tiles. Please make sure that our cutter is suitable for your own tile type, to avoid affect your use..
  • Premium Glass Breaking Pliers --- Made of high grade steel, more durable and better rust-resistance, can be used to achieve a controlled break in the glass, tiles, resulting in a clean, right-angled cut edge. The extended swivel handle makes it easier for the user to release the force..
  • Steps of Cutting Glass/Tile --- Firstly, mark the cutting position with the meassure tape, then align the top of the glass or tile, use the glass cutter to cut a straight line with even force. Nextly, align the cut section of breaking plier ....
Check Stock

Dremel Multipurpose Spiral Cutting Bit Multipack

  • The multipurpose cutting bit 561 cuts wood, plastic, fiberglass, drywall, laminate & vinyl siding.
  • The tile cutting bit 562 cuts ceramic wall tile, cement board and plaster (Not for use on floor tile).
Check Stock

12 Pcs Diamond Drill Bits for Ceramic, Diamond Hole Saw Drill Bit Set Kit, Premium Glass Drill Bit for Bottles, Pots, Marble, Granite Stone, Tile Cutting 0.16 Inch - 1.18 Inch（4 mm - 30 mm）YLYL

  • 12 PCS DIAMOND HOLE SAW DRILL BIT SET INCLUDES: 0.16“/4mm(2pcs), 0.23“/6mm, 0.31“/8mm, 0.39“/10mm, 0.47”/12mm, 0.55“/14mm, 0.62”/16mm, 0.7“/18mm, 0.78”/20mm, 0.86”/22mm, 1.18“/30mm. The different sizes glass cutting drill bit to meet you various demands!.
  • SUPER MATERIAL: Glass drill bit for bottles are made of industrial grade carbon steel, sharp, fine workmanship and super wear-resistant, extended service life. Glass cutting drill bit are high quality and good performance that excellent for making clean and accurate hole..
  • WIDE USAGE: Diamond hole saw drill bit set kit removes a complete circle from glass, marble, tiles, granite, ceramic or other. Perfect for drilling glass, porcelain tile, granite, bottles, wood, blocks jars, ceramic marble and and other hard surfaces etc..
  • DIAMOND DRILL BITS FOR CERAMIC TIP: When you using the diamond hole saw, please use iubrication (water), iubrication will extend drill bits life..
  • SATISFACTION GUARANTEED: Our team is committed to providing every customer with good products and satisfactory service. If there are any probl....
Check Stock