Top Gear Shafts Reviews

Martin HM1230 Miter Gear, 20° Pressure Angle, High Carbon Steel, Inch, 0.540\ Face, 5/8\ Bore Diameter, 2.5\ Pitch Diameter, 2.62\ Outer Diameter, 30 Teeth

  • Straight miter gear for transmitting mechanical power between perpendicular shafts.
  • High carbon steel for tensile strength and hardness.
  • Pressure angle of 20 degrees for a lower contact ratio between gears.
  • Hardened teeth for 1:1 gear ratio applications for torque and motion.
Check Stock

Gate Caster Wheel Spring Loaded 4 Inch Swivel Castor 440lbs Capacity with Universal Mount Plate,Fence Gate Wheel

  • Left hand spiral miter 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Spiral angle of 35 degrees better suits this spiral miter gear for higher speed and larger torque applications than straight miter gears.
  • Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for 1:1 gear ratio applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

Boston Gear LSA102YR Spiral Miter Gear, 35 Degree Spiral Angle, 1:1 Ratio, 0.625\ Bore, 12 Pitch, 18 Teeth, Steel

  • Right hand spiral miter 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Spiral angle of 35 degrees better suits this spiral miter gear for higher speed and larger torque applications than straight miter gears.
  • Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for 1:1 gear ratio applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

J.W. Winco 6136015 MC Plastic Cylindrical Handle

  • Hand knob: Black phenolic plastic (Duroplast PF).
  • Mainly used on threaded shafts such as gear lever arms or as fixed grip handles.
Check Stock

J.W. Winco 6136034 MC Plastic Cylindrical Handle

  • Hand knob: Black phenolic plastic (Duroplast PF).
  • Mainly used on threaded shafts such as gear lever arms or as fixed grip handles.
Check Stock

Fender Pure Vintage 70s Bass Tuning Machines

  • Set of four Pure Vintage nickel-plated stamped "clover-leaf" style open-gear tuning machines with mounting screws and bushings Fender stamped onto....
  • Tuning machine shafts approximately .55-Inch tall.
  • Fits most '70s-era basses will not retrofit to American Standard or American Deluxe basses.
Check Stock

Poulan PP1000E 7-Inch Pro Lawn Edger Attachment

  • Fits most major brand trimmers with detachable shafts.
Check Stock

Hakka Commercial Dough Mixers 10 Quart Stainless Steel Spiral Mixers (DN10)

  • Front-mounted controls with 60-minute digital timer and last batch recall.
  • Heat-treated hardened steel alloy gears and shafts.
Check Stock

Tamiya 300054114 Crawler Motor CR CR/Tuned 35T

  • Radio Control Kit. Durable ladder frame chassis features steel channel and resin crossmembers for high strength.
  • Adjustable front and rear leaf spring suspension system equipped with friction dampers.
  • 3-speed transmission allows gear changing and realistic low-speed driving.
  • Propeller shafts and slipper clutch efficiently transfer power to all wheels.
Check Stock

Complete Tractor 1104-4450 Steering Gear Assembly Compatible with/Replacement for Ford Holland - E0Nn3503Aa E4Nn3503Ca

  • Specs: Steering Gear Assembly, Length: 18", Outer Spline: 36, Notes: Manual steering gear w/18" main shaft. Sector shafts use D9NN2N289AA seals, already installed. Steering gear Assembly Compatible With / Replacement Fordiesel and gas applications..
  • Compatible with/Replacement forFord/New Holland: 8N3509B, 8N3548B, 8N3575B, X-S.67077.
  • Compatible With / Replacement For: Ford/New Holland 2000 Series 3 Cyl 65-74, 2150, 2300, 230A, 2310, 2600V, 2610, 3000 Series 3 Cyl 65-74, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 335, 3400, 3430, 3500, 3550 Indust/Const, 3600V, 3610, 3610NO, 3610V, 3910, 3910R, 3930, 4000 Series 3 Cyl 65-74, 4100, 4110, 4130 3 Cyl 90-99, 4410, 4610, 4630, 4830, 5030, 530A.
  • 1-year warranty protects you after your purchase. We're confident that our products will work flawlessly once installed in your vehicle. But in a rare case that it does not, we'll replace it anytime within one year of your order. If you have a problem, we will take every step to assist you, contact us for a replacement..
  • 100% New aftermarket Steering Gear Assembly built to meet OEM specifications for Ford/New Holland.
Check Stock

Stanley Proto J250G Proto 9-Inch Lock Ring Horseshoe Washer Pliers

  • For spreading both soft iron horseshoe lock washers used on brakes and tempered steel lock rings used on gear and bearing shafts.
Check Stock

Boston Gear G485Y-G Bevel Gear, 2:1 Ratio, 0.250\ Bore, 24 Pitch, 36 Teeth, 20 Degree Pressure Angle, Straight Bevel, Keyway, Brass

  • 36 teeth for use with G485Y-P mating bevel gear in 2:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

EXAUTOPONE Stainless Steel Bevel Gear Set AR44 Compatible with AR44 Heavy Duty RC Car Bevel Gear Set 30T/8T

  • 32 teeth for use with L149Y-P mating bevel gear in 2:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock