Top Gauge Jig Reviews

Aluminum Box Joint Jig for Miter Gauge, 17.7×2.4×1.2in Woodworking Table Saw Tools, Black

1.Aluminum box joint jig fits for miter gauge woodworking tool. It can be used on most table saws and router tables with standard slots..
2.Stable fixing device with high precision and excellent workmanship. Good choice for wood splicing process, wooden artworks, etc..
3.Stable box joint jig, safer operation with hand-held push table. Reduce the possibility of injury, you can use it with confidence..
4.It is the Box Joint Jig suitable for Miter Gauge. Made of high quality aluminum alloy, wear resistant and rustproof..
5.We strive to provide a product of the highest quality and the best customer experience, if you are not completely satisfied, do not hesitate to contact us at any time..

Check Stock

Aluminum Box Joint Jig,450x60x30mm / 17.7×2.4×1.2in,for Miter Gauge Woodworking Table Saw Tools

Aluminum box joint jig fits for miter gauge woodworking tool..
It can be used on most table saws and router tables with standard slots..
It is the Box Joint Jig suitable for Miter Gauge..
Made of high quality aluminum alloy, wear resistant and rustproof..

Check Stock

Fulton Taper Cutting Jig For Creating Tapered Angles Up to 15 Degrees on Your Table Saw 24 Inch Long Aluminum Rails with Scale and Stop

Table saws are designed to rip stock parallel to the fence or cross-cut stock at various angles with a miter gauge. Making long rip cuts at angles from 1 deg to 15 degrees on a table saw without a jig can be challenging and dangerous attempting free hand..
The Fulton Taper Cutting Jig has been designed to make long rip cuts at angles from 1 deg to 15 degrees using your table saw. Perfect for building woodworking projects like table legs, chair legs, magazine racks and more where slight tapers are common..
Our taper jig will most certainly enhance your woodworking abilities and your woodworking projects. This easy to use jig is fully adjustable for right or left hand use. As well as its ability to work on either the left or right side of your table saw fence..
Two ways to set the jig. First use the scale that has markings up to 15 degrees of taper. Second mark the starting cut at one end and then mark the exit cut at the other end of your piece of stock. Then simply adjust the taper jig to match those two marks..
Constructed of durable aluminum the Fulton Taper Cutting Jig comes with an easy grip handle, adjustable 24 inch rails with fixed stop, easy-to-read graduated scale that measures 0 to 15 degrees of taper (or 3 inches per foot) and full instru....

Check Stock

Bora WTX 50-Inch Ruled Clamp Edge and Jigsaw Guide Set, 545059K

Jig saw guide is fully adjustable to accommodate most jig saws.
Adjustable pointer guide keeps your cuts true.
Clamp Edge includes ruled edge for easy measuring.
Easy to change from cutting with the Clamp Edge guide to cutting freehand.
Clamp Edge made of heavy-gauge, extruded aluminum for extreme durability.

Check Stock

Woodhaven 4553 Box Joint Jig Upgrade Kit

The Box Joint Jig Upgrade Kit adds additional safety, convenience and ease of use features to your Woodhaven 4555 Box Joint Jig – sold separately. The 4553 Upgrade Kit can be added at any time to the 4555 Box Joint Jig..
You must have the 4555 Box Joint Jig to use the 4553 Upgrade Kit. Includes our 4555D five piece Setup Jigs for quick and easy setups of 1/4”, 3/8”, 1/2”, 5/8” & 3/4” joints..
Includes two adjustable Work Platforms that provide a safe and stable surface for the part to rest on. Made of slick 1/4″ thick HDPE (color may be black or white), they attach to the underside of the 24″ Ultra Track from the 4555 and eliminate friction between your saw or router table and the bottom of your workpiece. Also includes an Adapter Head for attachment to your miter gauge so you don’t have to make your own..
Includes a Stop that attaches to the back of the 24″ Ultra Track. This indexes against a side of the Adapter Head to help fine tune the joint size. Also includes a bit/blade Shield that attaches to the top of the 24″ Ultra Track and projects out the back where the bit/blade exits..
Lifetime guarantee against defects in material or workmanship. Made in the USA!.

Check Stock

Taytools 773338 3 Piece Dovetail Layout Kit with Dovetail Marking Jig with 1 5 and 1 8 Slopes Mikov Marking Knife and Wheel Marking Gauge

3 piece STARTER dovetail kit with Dovetail Marking Jig with 1:5 and 1:8 Slopes, Rosewood handle marking Knife and Wheel Marking Gauge.
MARKING KNIFE: This knife is made by Mikov of the Czech Republic. The blade is 1-7/8 inches long, 1/2 inch wide and 0.100 inch thick. The blade has a....
WHEEL MARKING GAUGE: The 1-9/16 inch diameter by 1-3/16 inch tall head is precision machined from solid brass (not plated!). The head has a....
DOVETAIL MARKING JIG: Draw precise and consistent layout lines for hand cut dovetails with this compact solid aluminum dovetail marker. It will mark....

Check Stock

DIYAREA Stair Treads Gauge Template Tool,Stair Jig, Metal Stair Measuring Tool,Adjustable Measurement Tool, Shelf Scribe Layout Tool for Stairs, Risers, Shelf and Cutting Drywall, 9.8''-72''

【Accurate and Time Saving】With the DIYAREA stair tread template, you can obtain the exact length and angle of your tread accurately and quickly, which makes installing stair treads a piece of cake. More accurate and efficient than traditional tape measure.
【Adjustable Length and Angel】The length of the stair template jig can be adjusted from 9.8 inches to 72 inches. And the stair tool can be rotated from 0° to 300° to measure irregular stair treads. You can easily adjust it to meet your needs.
【Premium Materials】The stair jig adopts premium 304 stainless steel scale plate and aluminum alloy connecting rods. The anodized aluminum surface makes it excellent wear resistance and corrosion resistance. Compare with the wooden tools, it is more durable and longer lasting.
【Simple to Use】The stair tread gauge is designed to assemble and disassemble easily, just fix the 4 screws and 4 knobs in the corresponding screw holes and adjust the length and angle of the stair gauge by tighten or unscrew the knobs with hands.
【Multipurpose】The stair tread gauge is an ideal tool for cutting and measuring stair treads, deck floors, wall shelves, window sills and shelves, etc..

Check Stock

TINTON LIFE Set of 13 Non-Slip Washable Stair Treads Carpet with Skid Resistant Rubber Backing Indoor Wooden Step Mats Self-Adhesive Stair Protectors 10.2\ x 25.2\ Alexander Red

Precise & Time-saving Stair Tread Tool - This stair stair measuring tool has a very precise scale, and it can adjust the scale accurately and measure accurately. Stair tread gauge will easily help you lay out stair treads, risers, and shelving. No more mistaken, and time-saving and MONEY-SAVING..
Multi-Uses - Our stair jig gauge will help you measure stair treads, risers and shelves. with 6 sconnecting rods, you can easily adjust the length or height from 11.4 - 60.7 inch to match any work requirements. The 360° rotation jig plate is easy to measure Irregular stair treads..
Long Lifetime Stainless Stair Tread Tool : The jie plate is made of high-quality 304 stainless steel , the adjustable link in the middle is made of high-quality stainless steel and the surface is treated by Anodizing.The overall product is sturdy and durable and can be used lifetime. Copper & diamond-shaped nut made of bakelite,Easy to adjust the tightness.
Ergonomic Design - Lased 0-10 in tick mark , curved and 0°to 360° adjustable jie plate, easy to operateand adjust to stair tread template set width providing a perfect layout for stair treads, risers and shelving.
Packing Product List - 2*Jig plate with ruler, 14* Stainless Steel Screws , 12* Thumb Nuts , 6* Adjustable Metal Con....

Check Stock

Stair Tread Jig Stair Tread Gauge Stair Tread Template Tool 360° Angle Adjustment Stair Measuring Tool 30 to 49 Working Stroke for Shelf Layout,Riser,Stair and Partitions

【Jig Function】 The stair measuring tool can travel from 30" to 49" with free extension of length and 360° rotation of angle to design various....
【Best Stair Jig】The stair tread gauge is made of high quality beech wood, impact and oxidation resistant, not easy to deformation and breakage.....
【Easy Installation】The stair jig measuring instrument tool is easy to install and easy to remove, no need to use other tools, just fix the 4....
【Product Package】The stair shelf layout measuring tool includes 2* straight long plates, 2* short plates, 4* screws, 4* black knobs, 1* nuts.Only....
【Zero Risk Shopping】100% refund service, permanent warranty, and friendly online service. No matter you have any questions, please feel free to....

Check Stock

Metal Stair Tread Template Tool, Stair Tread Jig w/12 Basement Retread Stairs, Stair Tread Gauge for Accurately Measuring Angle and Length (Black)

❤️Perfect Tread Template❤️: This stair tread tool is made of high-strength aluminum alloy with high toughness and precision CNC machining. The surface is not easy to fade. Highly adjustable and useful for other projects..
❤️ACCURATE❤️: This tool has 12 basement stairs to retread and the scale is etched by laser to ensure its clarity and accuracy. This tool was a must for doing the job. The tool was extremely accurate, easy to assemble, use, and light weight..
❤️VARIABLE LENGTH❤️: This stair tread gauge tool package has extension parts with a length of 16.9 inches (No.A), 11.4 inches (No.B) and 8 inches (No.C). It could be set up for multiples sizes between 8 Inch to 55 Inch..
❤️WILDLY APPLICATION❤️: The jig is perfect for accuratly measurement method of cutting wood to fit stairs and this can be used for so many different applications. Unless something is perfectly square, which is rare, this jig can transfer the angles to the workpiece. The jig is well made and holds tight from the measuring process to the tracing process!.
❤️WELL PACKAGED❤️: All parts neatly fit into the provided box with foam insert to keep and protect tool. Box fit nicely into my tool drawer. Amazing tool without the bulk..

Check Stock

Miter Bar, Aluminium Alloy Miter Bar Slider Table Saw Gauge Rod Woodworking Tool Durable in Use 0.374''Thickness(11.81'')

Miter Bar --- This is a miter bar usually used in table saw woodworking works.
Table Saw Miter Gauge --- Fixture jig is made of high quality materials, it is of strong strength and long durability.
Miter Gauge --- Universal threaded mounting holes for convenient use.
Miter Bars for Table Saw --- Adjustable stainless steel runner for perfect sliding action.
Miter Slot Runners --- For building various jigs on your table saw, like miter sleds etc.

Check Stock

Bora 36\ NGX Clamp Edge 544036

Clamping end moves with handle for easy adjustability from one side.
Locking handle grabs work surfaces for secure grip that won’t budge.
30 inch cutting capacity. Easily increase length with 50 inch extension.
Made of heavy-gauge, rigid aluminum for extreme durability.
Use with circular saws, routers, jig saws, and other portable power tools.
Part of entire NGX Clamp Edge System to cut and rip sheets and boards.

Check Stock

Bora 24\ NGX Clamp Edge 544024

Clamping end moves with handle for easy adjustability from one side.
Locking handle grabs work surfaces for secure grip that won’t budge.
24 inch cutting capacity. Easily increase length with 50 inch extension.
Made of heavy-gauge, rigid aluminum for extreme durability.
Use with circular saws, routers, jig saws, and other portable power tools.
Part of entire NGX Clamp Edge System to cut and rip sheets and boards.

Check Stock