Top Gasoline Engine Pump Reviews

XtremepowerUS 7HP 4-Stroke Gas Engine OHV Industrial Grade Gasoline Engine Recoil Start Go Kart Log Splitter Lifan Type Engine 212CC, Black

  • Ideal for Go Karts, Pressure Washers, Trailer Mounted - Mobile Carwashes, Log Splitters, RotoTillers - Cultivators, Water/Trash Transfer Pump.
  • Provides industrial-grade strength to get the job done.
  • Durable design runs quiy and provides smooth operation.
  • Engine Type: Industrial grade OHV gasoline engine.
  • The operating fuel is standard 87 Octane or better Gasoline EPA Approved ONLY, NOT selling for California.
Check Stock

4HP Outboard Motor Boat Engine, 4 Stroke Heavy Duty Outboard Motor Fishing Boat Engine with Water Cooling System (4-Stroke 4HP)

  • ...TAILS: Model: 4.0 horsepower jet pump.
  • Refueling method: No. 92 unleaded gasoline is recommended..
  • ③SIZE INFORS: Packing volume: 95*42*29cm/37.4*16.5*11.4inch.
  • Gross weight/net weight: 13(28.66lb)/9.7kg(21.3lb).
  • Recommended engine oil: four-stroke engine oil.
  • ④ATTENTION:Use four-stroke special engine oil (automobile and motorcycle engine oil).
  • Add oil according to the scale indication on the oil dipstick (the rotating cover),do not add more or less.
  • The fuel tank of the four-stroke outboard engine can only be filled with No.92 pure gasoline.
  • Gently press the oiler on the carburetor until the oil flows to the top of the transparent oil pipe..
  • ⑤WIDE APPLICATION: It can be marched with inflatable boats, rubber boats or fishing boats. ( Tips:The running-in period is about 10 hours or one month. Do not drive at high throttle during the runnin....
Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-140PSI, Universal for Auto Truck SUV Motorcycle ATV RV

  • FITMENT TYPE FOR JIFETOR FUEL PRESSURE GAUGE KIT: The car fuel pressure tester kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or direct-injection engine, due to the fuel gauge's low pressure range. Testing fuel pressure is an essential part of the troubleshooting process of fuel injection system..
  • CONNECTIONS FOR TU-114 FUEL PRESSURE GAUGE TOOL KIT: The fuel pressure test gauge set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard schrader valve on fuel pump, 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee help to splice in-line between the fuel pump and engine for most vehicles..
  • FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 3-1/2" large dial with 0-140psi/0-10bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. The pressure relief valve and 16"L fuel drain hose help to re....
Check Stock

New GX120 Carburetor Air Filter Spark Plug for GX120 GX160 GX168 GX200 Small Engines

  • 212cc carburetor Also for GX160 GX168F GX200 5.5HP 6.5HP Engines Motor Generator mower carb.
  • For Carburetor gx120 gx160 gx200 5.5hp 6.5hp Engine.Replace #:16100-ZH8-W61,16100-ZH7-W51.
  • Carburetor replaces for # 16100-ZH8-W51 16100-ZH8-W61 16100-ZE1-814 16100-ZE1-825, Throttle Governor Link Rod Speed Return Spring for GX120 GX160 GX200 168F Gasoline Engine Motor Generator Water Pump.
  • Air filter replaces ：17210-ZE1-517 17210-ZE1-505 17210-ZE1-507 17210-ZE1-822 17210-ZE1-821 17210-ZE1-820.
  • Package include: 1 carburetor, 3 gasket, 1 fuel line, 1 spark plug,1 Air filter .Carburetor fit for Harbor Freight Branded 212CC Chicago Electric Predator Gasoline Engine..
Check Stock

RANZHIX 4 Stroke 7.5HP 210cc Water Transfer Pump Portable Gas Engine 3 Inch Petrol Water Pump High Pressure Efficient Suction-for Ditch, Basin, Basement, Reservoir Construction Site

  • ⛽【SPECIFICATIONS】：--Fuel type: gasoline, engine displacement (CC): 210, suction port diameter 3in, high power 7.5HP, engine 170F, rated capacity 60 cubic meters/hour (264 gallons per minute), maximum head 40M (131ft) , Maximum suction head 9M (29.5ft), fuel tank size 3.6L, self-priming..
  • ⛽【WIDELY USED】：--Our water transfer pumps are specially designed to handle the most difficult tasks. Very suitable for immediately draining pools, emptying flooded basements, drawing out flooded ditches, filling or emptying water storage tanks or reservoirs, irrigating fields, flushing construction sites with hoses, etc. Products include: 1×gasoline water pump, 1×intake filter, 1×hose clamp, 1×spark plug wrench, 1×manual (*not including hose*)..
  • ⛽【CONVENIENT STORAGE】：--The maximum delivery capacity of 60m³ per hour driven by a 210cc engine provides excellent power, performance and efficiency. The maximum head of 40M and the maximum suction of 9M are enough to meet your needs. The lightweight and durable steel frame and the compact design of the unit allow you to conveniently store your pump until you need it next time..
  • ⛽【DURABLE AND HIGH-QUALITY WATER PUMP】：--This high-quality water pump is designed with a heavy-duty durable frame ....
Check Stock

WEN Lavender Styling Creme 6oz

  • For Harbor Chicago Electric Predator 79CC 99CC 69733 68124 Engine.
  • For Buffalo Tools Sportsman 1500 2000 Watt 2.8HP Gas Generator B.
  • For Harbor Freight Predator 1 in. 79CC 63404 Gasoline Water Pump.
  • For Harbor Freight Pacific HydroStar 1IN 1" Water Pump 79CC 69747.
  • For Bluemax 3435 2.4HP 2200PSI 1.6GPM Pressure Washer.
Check Stock

CarBole Universal Micro Electric Fuel Pump Inline Low Pressure Pump E8012S 12V, 5-9 PSI,30 GPH,5/16 Inch

  • Application: Universal. Works great for for Gasoline Diesel Vehicles. Carbole Micro fuel pump is manufactured in ISO 9000 / ISO 9001 / ISO 9002 certified facilitie.
  • Flow Rate: 30 GPH. Output Pressure: 5-9 PSI，Input Voltage: 12 Volt.
  • Cross-reference: E8012S, FD0002, P60430, EP12S, 6414671.
  • Quiet Operation, Steady Fuel Flows and 24000 mile warranty.
  • Designed for use with automotive and industrial application, cars, trucks, boats. IMPORTANT[Only fit for gasoline and diesel(without alcohol ) engine, and please be sure to use with filter, or it will affect the usage of fuel pump!!!].
Check Stock

12v 80w Electric Oil Change Transfer Pump Extractor Kits for Boat/Car/Lawn Mower Marine/Jet Ski/Truck/RV/ATV Changing Diesel Fluid Scavenge Suction

  • 80w OIL CHANGE EXTRACTOR - The engine oil transfer pump is 80w. Extracting motor oil from vehicles quickly and cleanly. It can be used for changing oil 3L/min. Not compatible with water and petrol, gasoline, kerosene..
  • EASY ENGINE OIL CHANGE - The 12v oil extractor pump comes with 2 extractor tubes, easy for a top down oil change by single ON/OFF switch controll. Pumps oil out throw dip stick, no need to lay under the machines or vehicles. The oil will simply draw out the motor through the oil dipstick bore..
  • MULTIFUNCTIONAL OIL EXTRACTOR PUMP - The oil change pump kit fits for Car, Boat, Jet ski, Motorcycle, Scooter, Marine, Quad Bike, Truck, Forklift, Generator, Tractor, Riding Mower, Snowmower, etc, siphoning & transfering diesel, oil to other Cars, Trucks, Ships, Boats, Tractors, Farm Machinery, Plant Equipment Etc..
  • PORTABLE OIL PUMP CHANGE EXTRACTOR - The oil transfer pump is mini but powerful. With 5ft Outlet tube & 4ft Inlet tube, the 8.2ft long battery clamps makes the extractor pump kit possible for being used at large range. The 2 hoops are used to tighten the tubes to avoid oil spilling..
  • FOR DIFFERENTIAL FLUID TRANSMISSION - This high efficient self-priming oil extractor pump is easy to pump various fluids and oils. Place the inlet/outlet ho....
Check Stock

PEGGAS New - Premium - Cold Water - Gasoline - Pressure Washer - Power Washer - Replacement - Axial Horizontal Pump 3/4“ Shaft - 2600-2700 PSI 2.3 GPM Aluminum Head -Simpson -Briggs & Stratton- Ryobi

  • ✦ GASOLINE PRESSURE WASHER VERTICAL PUMP ✦✦ PW25/2.3 ✦✦ High quality replacement pump for your pump. These are OEM replacement pumps for many models of pressure washers. If your old one stopped working, is corroded etc. don’t hesitate!.
  • ✦ 2600-2700 PSI 2.3 GPM RATING ✦ This pumps is rated at 2600-2700 PSI and 2.3 GPM which is great for any and all small house cleaning projects. Very safe pressure even for washing your car or other things without being afraid to damage the paint!.
  • ✦ UNIVERSAL FITMENT ✦ This pump comes with a standard 3/4” shaft which is universal for all small pressure washers. Hose connecters are standard M22 so you don’t have to worry about buying extra fittings. Your 5.5-6.5 HP engine will power this pump with no problem and bolt on directly!.
  • ✦ MOUNTING BOLT MEASUREMENT ✦ Hole Distance to hole – 2 5/8” Outer Holes – 1 7/8″.
  • ✦ PARTS COMPATIBILITY ✦ ✦ THIS PUMP WILL ONLY FIT A HORIZONTAL ENGINE, NOT A 7/8″ SHAFT & NOT VERTICAL ENGINE ✦ Models stated in the listing are potential matches only and NOT a guarantee of compatibility. The customer is responsible for verifying their compatibility (our pump with their machines)*** Fits Honda Excell units with 3/4″ shaft....
Check Stock

Arnold 2-Cycle Engine Oil - 1-Mix 16 oz.

  • For use with any 2-cycle engine with a ratio of 32:1, 40:1 and 50:1.
  • Provides superior lubrication for 2-cycle air-cooled gasoline engines..
  • Convenient Tip "n" Measure plastic bottle, with fuel stabilizer: holds 16 oz..
Check Stock

DC HOUSE 52cc 2.4HP Gas Powered Post Hole Digger with 3 Earth Auger Drill Bit 4' & 6' & 8'

  • ☛【52CC GASLINE ENGINE】The auger is ideal for quickly drilling into the earth in order to set into the ground: fence posts, poles, trees, shrubs etc. Equipped with a 52CC 2.5HP gasoline engine, the auger can be handled by one or two people easily for a wide variety of tasks..
  • ☛【MULTIPLE SIZE DRILL BITS】Supplied with bits of 4''&6" & 8" meet your different hole dig requirements. make it more accurate and easy to use.With this tool, you will be enabling drilling of multiple holes in quick succession..
  • ☛【MAIN PARAMTER】Engine: Single Cylinder, 2-stroke, air-cooled.
  • Easy starting system (cord starter). Centrifugal clutch.
  • ☛【PERFECT DIRT DIGGING】Lightweight & Easy to start, it is the perfect machine that will empower you to have ultimate control of over your land..
Check Stock

Fullas Carburetor Huayi P19 Carb Compatible with Honda GX200 GP200 168FB 170F 196cc 208cc 212cc OHV Gas Engine Replaces #16100-ZL0-W51

  • Huayi P19 carburetor compatiable with Honda OEM 16100-ZL0-W51/16100-ZH8-W61, Fits for 196CC 208CC 212cc GX200/168FB/170F 6.5HP 7.5HP Petrol Engine Made by Loncin,Rato,Ducar,Lifan,JD,etc, Replacement for Predator 60363 69727 69730 6.5HP/7HP/7.5HP Gas Engine, Intended for RATO R210 OHV Gasoline Engine. Widely used on 2inch 3inch water pump,2500PSI 2700PSI 3200PSI Pressue washer OHV Gas Engine. 2-3.5KW Gasoline Generator can be applied if enough space with the air filter..
  • Fullas P19 Carb Compatiable with Harbor Freight Predator 212cc Go Kart OHV Gas Engine.Compatible with Baja warrior 212cc Mini Bike..
  • Mounting hole center to center: 42.79mm, core hole: 19mm, choke hole: 24mm.package dimension：10cm*11cm*6.5cm.
  • Package includes: 1 x Carburetor, 3 x Gasket,1 x Fuel line, 2 x Clamps. Package size：4.02" x 4.02" x 2.76".
  • 100% satisfactory service, if you have any questions, please feel free to contact us by email!We will solve it for you in the first time!.
Check Stock

YSTOOL Fuel Pressure Tester Gauge Kit 140PSI Automotive Engine Injector Pump Test Gasoline Gas Injection Manometer Tool Set with Inline Fitting Schrader Adapter for Auto Car Motorcycle (Blue Case)

  • The fuel injector tester kit is designed to identify and diagnose malfunctions in fuel supply & injection systems and help find possible causes. Suitable for most fuel injection systems in gasoline vehicles such as cars, trucks and ATVs. Incompatible with Bosch, CIS-Jetronic, or GM throttle body systems because of no suitable connection adapters. Also not fit diesel high pressure injection pump or high pressure fuel track on direct-injection engine due to the test range: 0-140psi /0-10 bar.
  • Gas fuel pressure tester gauge kit equips with various fittings and hoses for test, and supports two assembly forms. One is to connect pressure gauge directly to fuel pump's standard Schrader / M6 / M8 / M10 / M12 / M14 fuel pressure test port with 15" / 8" hose and M8 / M10 / M12 / M14 adapters. The other is to measure by fitting the T-type joint between the fuel pump and engine. Please note: no small Schrader connector in this fuel presure test kit to perform service for some Ford models..
  • Accurate fuel pressure gauge has a 3-1/2" big color-coded dial with shockproof rubber cover. 15"L hose can attach to the 1/4" SAE standard Schrader valve on fuel pump or fuel rail directly. The built-in translucent fuel discharge hose and pressure release valve work for safe pre....
Check Stock