Top Gas Welding Tips Reviews

WeldingCity MIG Welding Gun Accessory Kit .035 Contact Tip-Gas Nozzle-Gas Diffuser-Nozzle Adapter for Lincoln Magnum 200/250 and Tweco #2 180-250 Amp

  • Premium MIG welding gun accessory kit includes consumable parts of contact tips, gas nozzles, nozzle adapter and gas diffusers for use with Lincoln,....
  • Work with 180-250 Amp MIG welding gun such as Lincoln Magnum 200/250 series, Tweco #2 and other equivalent MIG guns..
  • Content in each accessory kit: Tweco style consumables.
  • 2-pcs slip-on gas nozzles 22-50 (1/2"), 2-pcs gas diffusers 52, 2-pcs nozzle adapter 32 and....
  • For welding wire size: 0.023" (0.6mm), 0.030" (0.8mm), 0.035" (0.9mm) and 0.045" (1.2mm). Please refer to all listed pictures for part compatibility..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

Victor Technologies 0384-2691 Medalist 350 System Heavy Duty Cutting System, Acetylene Gas Service, G350-15-300 Fuel Gas Regulator

  • Gas Service: Acetylene, Oxygen Regulators: G350-150-540, Fuel Gas Regulator: G350-15-300.
  • Welding Nozzle: 2-UM-350.Maximum Cutting: 8 inches.Maximum Welding: 3 inches.
  • CA411-1 Cutting Attachment.Cuts up to 3/8" / 12.7mm 6" / 76.2mm with optional tips.
  • industries-Industrial and general fabrication, light fabrication, repair and maintenance,structural steel fabricationDescriptionThis heavy/medium duty system cuts up to 3/4" (19.1 mm) or 6" (152.4 mm) with optional tips. It welds up to 1/8" (3.2 mm) or 3" (76.2 mm) with optional nozzles. Includes: Heavy duty construction.
  • WH411C torch handle with built-in check valves.
Check Stock

9TRADING Replacement Mig Welding Gun Stinger Torch Lead 4 Clarke 130EN 180EN Welder Parts

  • The gun is 10 ft long, and will handle .023", .030", and .035" steel, stainless steel, and flux cored wires..
  • There is a gas valve in the handle, so this gun can be used with or without gas..
  • The gas hose extends 6 ft beyond the end of the gun, the trigger wires have the correct connector for the 130EN and 180EN welders, and the cable which carries the welding current extends 20" past the end of the gun..
  • You can see the gas hose, trigger connector, and the welding current cable in the second picture..
  • This gun uses the same Clarke contact tips, gas nozzles, and gas diffusers..
Check Stock

Mig Welding gun accessory 0.035 kit for Lincoln Magnum 100L or Tweco Mini/#1 Mig gun 20pcs Contact Tips 11-35 0.035 + 2pcs gas nozzles 21-50 1/2 + 2pcs gas diffusers 35-50

  • Mig Welding gun accessory 0.035" kit with contact tip,gas nozzle,gas diffuser for Lincoln Magnum 100L & Tweco Mini/#1..
  • Including:20pcs mig welding Contact Tips 11-35 0.035" + 2pcs gas nozzles 21-50 1/2" + 2pcs gas diffusers 35-50.
  • Fits for Tweco Mini/#1 and Lincoln Magnum 100L K530 series Mig welding guns.
  • Amazon satisfied customer service & fast ship.
Check Stock

funchic Mini Welding Gun Micro Gas Little Torch Welding Soldering Kit with 5 Interchangeable Torch Tip

  • Micro Mini Little Torch Soldering Welding With 5 Tips,Funchic Hoses Mini Gas Little Torch Welding Soldering Kit for Jewelers Jewelery.
  • Flexible hoses connect to any standard pressure regulator..
  • This torch is easily maneuvered in areas impossible to reach with conventional torches..
  • Used with acetylene, hydrogen, propane, propylene, map, and natural gas..
Check Stock

Weller Mini Butane Torch - WLTBUM2

  • 【Durable】This propane torch hose is made of high-quality brass material, durable, long-distance and high-elastic hose, not easy to wear.Come with automatic ignition device.
  • 【Widely Use】 The propane torch kit can be widely used for precision brazing, pipe welding,processing meat (deburring), thawing pipes, melting ice and snow, barbecues, etc. The maximum temperature can up to 3600℉, suitable for welding 3/4" copper pipes..
  • 【Easy to Use】 Install the end of the welding torch on the gas cylinder, and then turn the bottom knob. It is equipped with Self-lgnition system and a 4.8ft hose to ensure a safe use. The flame output can be easily controlled by rotating the knob to meet the welding needs of different projects..
  • 【Ergonomic Design 】 The hose torch uses a vortex propane design that allows the flame to release maximum heat. The 4.8-feet hose ensures a safe distance between the propane tank and the flame. Ergonomic design, long-term use will not hurt your hands..
  • 【Operation And Tips】Use only MAPP and propane gas.
  • Connection standard: CGA600. Do not use this welding gun for a long time in a closed environment, because it will generate a lot of heat and consume a lot of air during work..
  • Before attaching torch to gas cylinder,check and ma....
Check Stock

Welding Tip Cleaner (Gas Range Cleaner, Shower Head Cleaner etc)

  • Welding Tip Cleaner (Gas Range Cleaner, Shower Head Cleaner etc).
  • Includes 13 Stainless Steel Reamers (sizes 6 to 26) and One File.
  • Use to Clean Spatter and Debris from Oxy-Fuel Cutting and Welding Tips.
  • Can Also be Used to Clean Sprinklers, Shower Heads, Gas Range Burners and De-Soldering Tools.
Check Stock

Witonics Capacitor Replacement Kit for Hyundai X93W with Soldering Tools

  • Professional contractor grade oxyacetylene welding and brazing outfit.
  • Two Welding/Brazing Tips for brazing up to 1-Inch copper tubing and welding up to 1/8-Inch steel.
  • Single stage Patriot series regulators with protective rubber gauge boots.
  • Front valve welding handle with stainless steel ball point valves for accurate gas control.
  • Welding Goggles with flip up lenses and are designed to accommodate prescription eyewear.
Check Stock

Welding Machine 3 in 1 Gasless Mig Welder 110/220V, Flux Core/Lift TIG/Stick Welder 160A

  • Welding Machine 3 in 1: 3 in 1 combo gasless flux core welder, stick welder and Lift TIG welder. (TIG torch need purchasing separately)..
  • Dual Voltage Input Design: Welding machine can be plugged into 110V / 220V dual voltage (automatic matching)..
  • 160A Welder: Up to 160A output current that can weld mild up to 5/32 inch (4.0mm) plate. The welder comes with 10pcs welding rods..
  • Gasless MIG Welder: Release hard moving of gas cylinder, and work with flux core wire perfectly( welder suitable for 0.030/0.035" flux core wire), comes with 1pcs 0.030"/2 lbs flux core wire, 2pcs 0.030" mig tips, 2pcs 0.035" mig tips..
  • Synergic Control: Through a knob to adjust the welding current, other welding parameters (wire feeding speed, welding voltage, inductance value, etc.) automatically matched with it. It has the feature of easy adjustment. It is suitable for both professional welders and novices..
Check Stock

Mig Welding gun accessory 0.030 kit for Lincoln Magnum 100L Tweco Mini/#1 Mig gun 20pcs Contact Tips 11-30 0.030 + 2pcs gas nozzles 21-50 1/2 + 2pcs 35-50 welding diffuse

  • Mig Welding gun accessory 0.030" kit tip-nozzle-diffuser with contact tip,gas nozzle,gas diffuser for Lincoln Magnum 100L & Tweco Mini/#1..
  • Including:20pcs Contact Tips 11-30 0.030" + 2pcs gas nozzles 21-50 1/2" + 2pcs 35-50 welding diffuser.
  • Fits for Tweco Mini/#1 and Lincoln Magnum 100L K530 series Mig welding guns.
  • Amazon satisfied customer service & fast ship.
Check Stock

Uniweld KC100P Centurion Weld Braze Outfit with 511 Plastic Carrying Stand brass copper blue

  • Professional contractor grade portable oxyacetylene welding and brazing outfit-Tanks not included (Sold Separately).
  • Two Welding/Brazing Tips for brazing up to 1-Inch copper tubing and welding up to 1/8-Inch steel.
  • Single stage Centurion series regulators with protective rubber gauge boots.
  • Front valve welding handle with stainless steel ball point valves for accurate gas control.
  • Welding Goggles with flip up lenses and are designed to accommodate prescription eyewear.
Check Stock

Mig Welding gun accessory 0.035

  • Mig Welding gun accessory kit 0.035" for Miller Millermatic M-10, M-15 and Hobart H-9,H-10 with contact tip,gas nozzle,gas diffuser.
  • Including:20pcs Contact Tips 000-068 0.035" + 2pcs gas nozzles 169-715 1/2"+ 2pcs gas diffusers 169-716.
  • Fits for Miller Millermatic M-10, M-15 and Hobart H-9,H-10.
  • Amazon satisfied customer service & fast ship.
Check Stock

SÜA 25' Heavy Duty Straight Cutting Torch 90º Head

  • Die Forged Brass and Stainless Steel Heavy Duty OxyFuel Cutting Torch Compatible with Harris.
  • Uses Series 6290NX Propane and 6290NXP Propylene Cutting Tips - Gas Service: Oxygen and Propane/Propylene with appropriate tips..
  • Can cut up to 3" (76 mm), with included 6290NX-3 (propane), tip and up to 8" (203 mm), with additional tips. See tip chart for reference.
  • Head Angle: 90 ° - Weight of Torch: 3 Lb - Gas Inlets 9/16" - 18 R and L (B-B Connectors for Twin Welding Hose).
Check Stock