Top Gas Range Thermocouple Reviews

MENSI Outdoor Propane Gas Patio Heater Replacement Parts Safety Thermocouple Sensor

Propane gas patio heater dump switch type thermocouple end nuts for valve M8*1.
Two terminals connect dump switch on the patio heaters.
Thermocouple tip thread M6x0.75 universal type (Can adjust height easily by nuts).
Easy install - Head for heating around burner and thread nuts for valve other two terminals for dump switch.
The thermocouple can connect a thermostat as well. Keep the head to be heated always or it may stopped gas.

Check Stock

DRELD Low Pressure LPG Propane Gas Fireplace Fire Pit Flame Failure Safety Control Valve Kit with 5/8” -18UNF Inlet Outlet Thermocouple Knob Switch, Fits for Gas Grill, Heater, Fire Pit

SIZE: 750 mm thermocouple with M8*1 threaded head. Bakelite knob OD 38mm, D shaft 6.1mm..
APPLICATION: The kit is suitable for low pressure repair control system for Gas Grill, Heater, Fire Pit, & Fireplace..
MATERIAL: The fire pit gas control valve kit is made of brass and plastic for durable use. Not OEM but fits OEM Standards..
HOW TO USE: Fix the valve on a plate or board of your grill or fire pit by the head screw and flange. Connect your inlet and outlet hose on inlet and outlet side. Fix the thermocouple nut M8 on the valve end tightly. Connect thermocouple and end thread well. Open gas by correct size knob and push your valve around 5-10s till the thermocouple head is heated enough. Release your hand and it works properly. If the gas valve shut off again when you release hand, then please check..
AFTER SALES SERVICE: The Propane Fire Pit Kit Replacement Part completed with a One-year Warranty. Should be there any question, please feel free to contact us..

Check Stock

Emerson H06F 36 Universal Junction Block Thermocouple 36 inch

36 inch junction block thermocouple with energy cut-off.
Stainless steel element construction for prolonged thermocouple life.
Standard coaxial thermocouple 11/32 inch double lead thread.
Universal adapter fittings included with each kit for replacing thermocouple in most types of pilot burners.
Works for both LP and natural gas applications.

Check Stock

3 Meters K Type Mini-Connector Thermocouple Temperature Probe Sensor Temperature Sensing Line K Type Thermocouple Wire Measure Range -50 to 400 Celsius, Compatible with TM902C/ TES1310 (5 Pieces)

You will get: the package comes with 5 pieces k type thermocouple temperature probe sensors in 3 meters long, the enough quantity and length to meet your daily need.
Measurement range: the measure range of the temperature sensing line is -58 to 752 °F (-50 to 400 °C).
And the probe sensor can effect in 5 second with the accuracy degree 0.025 or 0.075.
Wide Applications: for general purpose temperature applications, the k type mini-connector is fastly response that is suitable for rapid measurement of air and gas, not suitable for liquid measurement.
Allows forming and bending of the thermocouple, so you don't need to worry about the risk of cracking.
Universal compatiblity: the thermocouple wires can compatible with most k type temperature measuring instruments, they can compatible with TM902C and TES1310.
Good insulation : the k type probe sensor is made of the fiberglass, which has good insulation, strong heat resistance and strong tensile strength.

Check Stock

Thermocouple & Tilt Switch for Patio Heater, Thermocouple and Dump Switch Repair Kit for Propane Patio Heater Glass Tube Patio Heater Gas Heater, Thermocouple Replacement for Tower Heater, 2 Pack

Purpose - This patio heater repair kit is to solve problem of pilot light not staying lit and heater not ignited. Problem can usually be fixed by replacing thermocouple and dump switch correctly..
Wide Application - Suitable for thermoelectric gas heater, outdoor propane heater, glass tube patio heater, porch patio heater, standing patio heater, tower heater, Pyramid heater, Hampton Bay heater, etc..
Easy to Replace - Probe is connected to the ignition, thermocouple is connected to the valve, the other two ports are connected to the safety dumping switch. If you are handy, this repair kit can save you a new heater..
Dimension - The thermocouple wire has total length of 350mm with temperature resistance sleeve. It has an M8*1 fixed thread head with end thread nuts that are compatible with 8mm gas valves. 15A weak current safety dump switch for gas R≤10 mΩ. Probe is not threaded. Note: Check your lead lengths before purchasing..
Package included tilt switch X 2pcs, thermocouple X 2pcs..

Check Stock

GBC Document Camera, Discovery 3000 (DCV10004)

pyrometer Temperature range: -50°C to 1300°C ( -58°F to 2372°F) and Overload display alert when input exceeds measurement range pyrometer. Thermocouple Temperature range: -50°C to 1000°C ( -58°F to 1832°F).
Designed for use with K-type thermocouples and Selection between Celsius and Fahrenheit.
Decimal or round number display selectable (decimal range is -58.0F to999.9F and round number range is -58F to 2372F).
Includes 2 Thermocouples ( One 3" K type temperature probe (-58 – 752 °F) and one Kiln Heavy duty K type Thermocouple ( -58°F to 1832°F) and Digital Pyrometer, 9V battery and Manual.
Thermocouple Measurement range: 32 - 1832 °F (0 - 1000 °C) Thermocouple Type: K Type Cable length : 3 ft Sensing tip length: 6" (150mm) Stainless Steel Sensing tip diameter: 0.19" (5mm) Thread width : 5/16" (M8) Internal Insulation: Fiber Glass External shielding: Metal Shield (Stainless steel braided).

Check Stock

Water Heater Pilot Assembely Includes Pilot Thermocouple and Tubing LP Propane

LP Propane GAS WATER HEATER PILOT ASSEMBLY AND THERMOCOUPLE.
STANDARD 24" LENGTH total. Tubing and thermocouple length 22 inches.
FITS MANY WATER HEATERS ON THE MARKET BUT NOT ALL.
WARNING !!! ONLY QUALIFIED SERVICE PERSONEL SHOULD ATTEMPT TO REPAIR GAS EQUIPMENT.
Search for our 36" pilot if you need a longer one..

Check Stock

Mr. Heater Rotor Kit with Rotor Vanes Nylon Drive for 2003 or Newer Forced Air Kerosene Heaters

The 120630-01 Pilot ODS assembly was used on many of the unvented Natural Gas Gas wall heaters and NG unvented gas log sets and fireplaces..
The 120630-01 Pilot ODS assembly take the 120790-01 Dual Wire Thermocouple. The 120790-01 Thermocouple Dual Wire 33 Inch Length with silver and brown transmitter wires that fits the Desa International Unvented Vent-Free infrared gas wall heater..
Many of the Unvented Gas Logs sets, Wall Heaters and fireplaces that used the 120630-01 Pilot ODS were made by DESA International and sold under many different brand names by Lowe's, Ace Hardware, Home Depot, Sears, Menards Store and other retailer throughout North America..
Some of the Brand Names were Vanguard, Comfort Flame, Glo-Warm, Cozy Heat, Kozy World, Pro Com, Desa International and others..
The proper ODS Pilot Assembly must be used for the correct model number heater..

Check Stock

120630-02 Pilot ODS for Vent Free Propane Gas Wall Heaters by DESA, Glo- Warm

The 120630-02 Pilot ODS assembly was used on many of the unvented LP Gas wall heaters and LPG unvented gas log sets and fireplaces..
The 120630-03 Pilot ODS assembly take the 120790-01 Dual Wire Thermocouple. The 120790-01 Thermocouple Dual Wire 33 Inch Length with silver and brown transmitter wires that fits the Desa International Unvented Vent-Free infrared gas wall heater..
Many of the Unvented Gas Logs sets, Wall Heaters and fireplaces that used the 120630-02 Pilot ODS were made by DESA International and sold under many different brand names by Lowe's, Ace Hardware, Home Depot, Sears, Menards Store and other retailer throughout North America.
Some of the Brand Names were Vanguard, Comfort Flame, Glo-Warm, Cozy Heat, Kozy World, Pro Com, Desa International and others..
Replaces part numbers: 098245-01, 098245-03, 099440-02, 099440-06, 107667-02, 110803-02, ene 56817, ene 70366, J5527 F.

Check Stock

Hampton Bay 42,000 BTU Pyramid Patio Heater

This thermocouple and tilt switch is to solve the problem of pilot light NOT stay lit.
Work with outdoor propane patio heater, standing patio heater, tower glass tube heaters, table propane heater, Hampton bay patio heater etc..
Easy to install, just connect the 2 lead together to bypass it.
The thermocouple wire has a full extension length of 350mm with temperature resistance sleeves. It has an M8*1 fixed thread head with end thread nuts that are compatible with 8mm gas valves..
Package including 1pc tilt switch + 1pc thermocouple..

Check Stock

Digital pyrometer F,C pottery ceramic glass kiln Sensor Thermometer Thermocouple

Digital Pyrometer Temperature range: -50°C to 1300°C ( -58°F to 2372°F).
Ceramic thermocouple Temperature range: -50°C to 1300°C ( -58°F to 2372°F).
Included Pyrometer and 2 type K thermocouple ( One 3" K type thermocouple(-50 to 400°C) and one Kiln K type (-50 to 1300°C)).
Decimal or round number display selectable (decimal range is -58.0F to999.9F and round number range is -58F to 2372F).
Shipping to USA is 3-6 business days. For more information please go to our website Thermomart.

Check Stock

ZLINE 36 in. Porcelain Rangetop in Black Stainless with 6 Gas Burners (RTB-36)

...n: 23x19.5x 3 inch(L*W*H). Cut-out Size: 21.5*18.5 inch.
Main Burner Heat Input: 3300W(11259Btu/H). Burner Heat input: 3300W/H + 1350 KW/H + 1350KW/H + 1000W/H.
SAFE AND EASY TO USE:The ignition is controlled by push-type rotary switch which can prevent accidental touch by children. What's more, being equipped with a thermocouple flame out fault system ensures the gas is automatically turned off when no flame is detected, in case of gas leakage..
【COMPATIBLE BOTH NG &LPG 】The gas cooktop stove delivers the maximum 23541BTU power to propane and natural gas (Default Natural gas). Capable for multi-purpose such as RVs, big kitchen, cooking lover family, etc. (Both LPG/NG Nozzles Included).Kindness remind:pipes and LPG Gas regulator are NOT included..

Check Stock

ennoLogic Volt mA Thermocouple Loop Process Calibrator eC370T - 0-20V and 4-20mA Simulator – Portable Millivolt mA and Temperature Signal Generator and Meter for Transmitters Current Loops PLC

VERSATILE AND ACCURATE VOLT MA THERMOCOUPLE CALIBRATOR: Signal generator, simulator and volt / mA meter for calibrating, testing and repairing milliamp loops, thermocouples, PLC, temperature control and HVAC systems. Easily generate precise test signals for current and voltage devices (mA, mV, V, Celsius and Fahrenheit ranges)..
NUMERIC KEYPAD for ease and flexibility in setting output signals configuring options. HOTKEY programming for each numeric key (long-press immediately outputs user-configured voltage, current or temperature signal). RAMP AND LADDER OUTPUT FUNCTIONS can be custom configured. BUILT-IN 24V LOOP SUPPLY lets you power and read a device or transmitter without needing another multimeter. This greatly simplifies testing 2-wire current loops..
MEASURE VOLTAGE OUTPUT SIGNALS from process devices and sensors with two input ranges of 0-100mV (0.01mV resolution, 0.06% accuracy) and 0-20V (1mV resolution, 0.08% accuracy). MEASURE CURRENT TRANSMITTERS within a range of 0 to 24mA with 0.001mA resolution and 0.08% accuracy. MEASURE THERMOCOUPLE TEMPERATURES within a range of -250°C to +1800°C and resolution of ±0.7°C to ±2°C (range and resolution depends on thermocouple type, supported are type K, J, E, T, N, S, R, and B.).

Check Stock