Top Gas Pressure Regulator Or Reviews

Maxitrol RV48L Natural Gas Pressure Regulator 1/2 FPT Thread 13/16 In and Out Opening 1/2 PSIG In 3 -6 WC Out

  • GAS TYPE & PRESSURE - Gas Type: Natural Gas (NG). Inlet gas pressure: 1/2 PSI. Outlet pressure range: 3" - 6" Water Column.
  • PIPE THREAD SIZE - 1/2" Inlet & 1/2" Outlet FPT GAS PIPE. Make sure you measure the gas pipe or regulator opening as close to 13/16 inches as shown in....
  • CAUTION - This regulator has 13/16" openings for 1/2" gas pipes. The 1/2" gas pipe means interior diameter 1/2" but outside diameter is 13/16", refer....
  • MARKING - Model: RV48L, Marking: 1/2 PSIG, Po 3" - 6". Inlet pressure 1/2 PSI. Adjustable outlet pressure 3"-6" Water Column..
  • OPERATE TEMPERATURE - 32°F - 225°F (0°C - 107°C). Do not install the regulator too close to the heating equipment or use in very cold environment.....
Check Stock

Nitrogen Regulator with 60' Hose for HVAC Purge, 0-800 PSI Output Pressure, CGA580 Inlet Connection and 1/4'' Male Flare Outlet Connection

  • 【Connection】CGA-580 Inlet Connection fits standard Nitrogen, Argon, Helium, and Inert Gas Tanks from any supplier.1/4" Male Flare Outlet Connection fits HVAC Charging Hoses for Purging ,Pressure Testing and High-pressure lines..
  • 【Accurate Pressure Gauge】The Nitrogen Gas Regulator has two Easy to read pressure gauge,covered with scratch-resistant plastic protective film and rubber cover.Input: 0-4000PSI.Output: adjustable 0-600PSI.The display show 800PSI that you can rate them at 600PSI, but they are able to go up to 800PSI..
  • 【Durable Construction】Our Nitrogen Regulator is made of solid brass,so the surface can keep good looking in a long time. Precision thread design ensures high sealing performance and avoids gas leakage. You can adjust the nitrogen regulator smoothly and accurately through the T-handle to prevent galling..
  • 【Application】The Nitrogen regulator is a standard pressure control valve that reduces the input pressure from a liquid or gas stored in a tank.It is great for HVAC purging,pressure tests,inertization,leakage tests,and Soldering,like the accurate reading of Nitrogen Regulator would help you to adjust pressure before HVAC puring..
  • 【Filter Structure】A filter structure is used at the connection, which can effectively ....
Check Stock

MRbrew CGA-320 Keg Regulator, Quick Disconnect CO2 Kegerator Regulator with Pressure Adjustment Knob, Beer Regulator with Safety Manual Pressure Relief Valve, with 2 Swivel Nut & 1/4’’ & 5/16’’ Barbs

  • 【1/4’’ QUICK DISCONNECT】MRbrew thread to barb keg beer regulator comes with 1/4” swivel nut, allows CO2 regulator to be used with 1/4″ and 5/16″ I.D size hoses, threaded setting makes disconnection between regulator and gas hoses a great breeze!.
  • 【EXCELLENT SEALING & ANTI-BACKFLOW】Durable thick nylon washer achieves quad—Ring inlet seal at connection between tank and regulator, perfectly avoids one leakage source, turning off ON/OFF valve avoids back-flow of beer, worry-free operation with MRbrew keg regulator!.
  • 【YOUR SAFETY, THE FIRST!】Integrated sintered bronze mesh inlet gas filter perfectly controls co2 gas flow, manual pressure release valve releases extra pressure at 45 PSI, help you get correct pressure reading, always keeps you safe when you operate regulator!.
  • 【DUAL GAUGE & STABLE PRESSURE】MRbrew upgraded regulator comes with dual pressure gauges, displays pressure clearly, easy to adjust and stabilize to the pressure you want by pressure adjustment knob, a well-built regulator for getting accurate pressure!.
  • 【100% LIFELONG IUUSES SOLVING FOR YOU】Each MRbrew keg regulator is backed by unbeatable, reliable, trusted product quality and customer service, please feel free to contact us if you....
Check Stock

MRbrew Efficient Adjustable Beer Faucet Kit, Adjust/Control/Regulate Beer Flow Rate, Heavy Duty Commercial Brewing Kegging Stainless Core Adjustable Draft Kegerator Keg Tap Kit for Beer Tower Shanks

  • 1.Include: Beer Keg CO2 Regulator CGA320, Red Gas Line, Worm Clamps, 5/16" Swivel Nuts, Ball Lock Gas Disconnect MFL.
  • 2.Material: PVC Material for Gas Line, Stainless Steel Material for Clamps, CO2 Regulator and Swivel Nuts, Plastic Material for Ball Lock Disconnect.
  • Connect tips: Tighten the Clamps when it Connects the Beer Gas Line will guarantee no Leak.
  • 4.Gas Gauge: 0-60 PSI and 0-3000 PSI, Manual pressure release valve releases extra pressure at 45 PSI, help you get correct pressure reading, always keeps you safe when you operate regulator.
  • 5.Guarantee: Quality Guarantee, any problem for CO2 Regulator with ball lock and gas line set, Money Back or Replacement free..
Check Stock

Argon/CO2 Flow Meter Gas Regulator Compatible with Mig Tig Welder Regulator with 6.6FT Gas Hose 10 to 60 CFH Output Flow 0 to 4000 PSI - CGA-580 Inlet argon flow gauge welding regulator

  • 【Hight Quality & Sturdy Argon Regulator with Hose】Argon flow gauge regulator's body is made of high-quality brass, being sturdy and durable, which can withstand harsh environments and have a longer life. Came with 6.6 Ft argon welding gas regulator hose and protective cover are made of impact-resistant composite material for safety and durability.
  • 【Wide Application】Idea choice for CGA 580 Tank Fitting. This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet). So it will screw right into the Argon, Argon/CO2 tanks. IDEAL FOR Miller, Lincoln, Hobart, HTP, and most other welders! Idea choice for MIG TIG welding, cutting ,chemical and electronics industry.
  • 【Accurate Gas Flow Gague】Adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube. 0-4000psi inlet pressure, easy-to-read bottle pressure gauge included, allowing you to view how much gas is left in the tank range 0 to 4000psi. Will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting. It also comes with a standard 1/4" barbed fitting.
  • 【Good Design】Use economic style flow meter regulator and single stage piston design, combination of regulator and flow meter as one u....
Check Stock

Vertical Two Stage Propane Regulator with POL and Gauge, 2 Stage Propane Regulator Standard 3/8 Female NPT Connection, Double Stage Regulator for 20-100lb Tank，Gas Grill, RV, Propane Heater…

  • 【Two Stage Propane Regulator】Double propane regulator is newly upgraded. 2 stage regulator ensures that the inlet pressure of propane flowing to the first stage and the second stage is consistent. Dual propane pressure gauge can detect leakage and read the propane oil level and confirm again that there is no propane leaked, safer to use.
  • 【Inlet and Outlet】2 Stage Propane Regulator Inlet: Standard POL Tank Link.
  • Outlet has an Internal 3/8" female NPT, Maximum BTU 16,000 BTU/Hr Capacity.
  • 【Widely Application】2 Stage Propane Regulator is made of 100% solid brass to provide secure and sealed connection between application equipment and propane tank and solved the problem of gas leakage.Dual propane regulator with Gauge for gas grills, RVs, generators, stoves, heating boilers, burners, gas generators, gas stoves, propane fireplaces, water heaters, etc..
  • 【Easy to Install】Two Stage Propane regulator can be connected to the tank without tools.Standard P.O.L. tank connection for propane regulator with overcurrent protection, and it will automatically shut down if the operation error causes danger to ensure safety and durability. Perfect for family BBQ or outdoor travel, easy to disassemble, easy to move, easy to place.
Check Stock

Argon CO2 Regulator - Welding Gas Flowmeter For TIG MIG - Brass Construction Flow Meter For Argon and CO2 Welder Tanks CGA580

  • ARGON/CO2 REGULATOR FOR WELDING: Terrabloom Argon Gas Flow Meter Regulator is Designed for Professional TIG/MIG Welding Applications. It Provides an....
  • ARGON FLOWMETER WITH PRESSURE GAUGE: In addition to allowing to adjust gas flow rate, our Argon CO2/Argon flowmeter contains a pressure gauge that....
  • TIG/MIG FLOWMETER INSTALLATION: TerraBloom Welding Pressure Regulator Seamlessly Connects To Standard Argon/Helium/CO2 Tanks with CGA-580 Inlet....
  • VERSATILE APPLICATIONS FOR CGA-580 Tanks: This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet).
  • WARRANTY: Covered by TerraBloom's 30-day money back guarantee. 1 Year Warranty Against Manufacturing Defects.
Check Stock

Shok Blok SB-FPV-40 Water Filter Pressure Regulator Protection Valve for RO & Filter Systems - 1/4\ QC Ports, 40 PSI

  • GAS TYPE & PRESSURE - Gas Type: Natural Gas (NG). Inlet gas pressure: 1/2 PSI. Outlet pressure range: 3" - 6" Water Column.
  • PIPE THREAD SIZE - 3/4" Inlet & 3/4" Outlet FPT GAS PIPE. Make sure you measure the gas pipe or regulator opening as close to 1-1/16 inch as shown in the picture’s table..
  • CAUTION - This regulator has 1-1/16" openings for 3/4" gas pipes. The 3/4" gas pipe means interior diameter 3/4" but outside diameter is 1-1/16.
Check Stock

Set

  • 1.Material: Heavy Duty Beer Regulator, Brass Body Chrome Plate Finish, anti-Corrosion, Two pcs of Washer and Hose Clamps will guarantee no Leak Problem.
  • 2.The first stage reduces the output pressure from the tank to a more manageable pressure, and the second stage fine tunes that pressure for output to the keg.
  • 3.PERA Beer Keg Regulator with CGA-320 valve can be connected to American CO2 Tank, it is convenience used in Commercial Environments like Beer Bars, Restaurants, if you like home brewing, it is a best brewing tools.
  • 4.With 45 PSI safety relief valve and gas shut-off valve, it will be more safe and more precise control when making small adjustments to the output pressure.
  • 5.Guarantee: Quality Guarantee, any problem for the Beer Keg Gas Regulator, Money Back or Replacement free..
Check Stock

GasSaf 6 Feet Propane Regulator and Hose Universal Grill Regulator Replacement with Stainless Steel Braided Hose for QCC1 Low Pressur LP Gas Grill, Heater and Fire Pit Table,3/8' Female Flare Nut

  • 3/8-inches flare fitting has an outside diameter of 5/8-inches in order to accommodate the flare seat,The Maximum 95, 000BTU per hour, low pressure propane regulator with 2feet/24inch Low Pressure LPG hose for propane gill and fire pit table, strong hose will last for a long time.
  • Replacement for Weber Genesis 300-series gas grills, Genesis Silver C, Genesis Gold , Genesis Platinum , Spirit E-210/E-310 etc. and most of Char-broil gas grill with side burner, Uniflame GBC873W-C, GBC873W, GBC940WIR, GBC940WIR-C , most of Kenmore gas grill and most of Brinkmann gas grill..
  • Easy installation - No tools required, tool-less attachment to tank. It is normal if you hear noise in the regulator, it is the resonance of the gas in the regulator..
  • Connects to QCC1/Type1 LP tanks and cylinders，fits to gas grills, heaters ,fire pit table and most QCC1/Type 1 low pressure gas application.Great for BBQ, camping, tailgating, heating needs or having an outdoor cookout..
  • Provides secure, air-tight connection between grill or fire pit and tank, no gas leaks, ensures safety while using grill, no issues with regulator or gas, air flow is kept stable and at appropriate levels.
Check Stock

DozyAnt 5 feet 0-20 PSI Adjustable High Pressure Propane Regulator with Hose for QCC1/Type1 Propane Tank Cylinder Fits for LP Gas Grill Turkey Fryers Patio Heaters and More Appliances-Safety Certified

  • Fits QCC1/Type1 LP gas propane tanks and cylinders and 3/8-inch female flare connection. Great for BBQ, camping, tailgate party, heating needs or having a patio/camping outdoor cookout..
  • Adjustable 0-20 PSI high pressure output propane regulator with 5 feet hose is a must have item for your propane burners, stove, turkey fryers, heaters, smokers. Not suitable for appliances which need low pressure regulator..
  • High quality this product itself with safety certification and excellent sealing quality is promised for your safety. This propane regulator with hose has excess flow protection for your safety and will automatically shut off..
  • 100% solid brass corrosion resistant construction fitting, and provides secure, airtight connection between propane tanks cylinders and propane gas appliances..
  • No tools needed, easy and quick attachment for easier installation.DescriptionIt features a 0-20 PSI adjustable high pressure propane regulator with 5ft hose and can be installed quickly and easily to propane tanks and cylinders..
  • The red knob can be regulated the gas flow and pressure.( Adjustable pressure range: 0-20PSI ).
  • The size of a 3/8 flare nut is 5/8 in order to accommodate for the flare seat..
Check Stock

Robertshaw 700-503 Millivolt Gas Valve, 250 To 750 Millivolts

  • Adjustable servo regulator effectively maintains almost constant gas output pressure under wide fluctuations in gas supply pressure.
  • Natural to lp and lp to natural conversion kits available for standard and slow opening gas valves.
  • Description: 24 vac dual intermittent pilot, slow opening gas valve with 3/4 in. X 3/4 in. Inlet/outlet, standard opening and 3.5 in. Wc pressure regulator setting.
Check Stock

AJinTeby Gas Grill 5430 Regulator Replacement for Coleman Propane Stove Not Fit for Coleman Roadtrip LXE Grills

  • Regulator only fit for Coleman Triton Portable Propane Gas Camp Stove, Classic Camp Stove with 2 Burners, Fold N Go Stoves Coleman Classic Propane....
  • Propane Grill Connector: Premium low-pressure propane grill regulator. Gas Grill 5430 Regulator Replacement for Coleman Propane Stove.
  • Easy Installation - The stove regulator replacement is easy to install and operate. This replacement propane gas regulator keep your stoves running....
  • Great Replacement - Made of stainless steel and solid brass, it is sturdy, long-lasting. This propane gas regulator maintains steady propane gas....
  • Check the user manual of your Coleman stove to see if it is compatible with this gas stove regulator. Note: NOT fit for Coleman Roadtrip LXE Grills..
Check Stock