Top Gas Flow Meter Reviews

Argon CO2 Flow Meter Regulator with 80 Inches 6.6Ft Gas Hose for TIG MIG Welder 10 to 60 CFH - 0 to 4000PSI Pressure Gauge CGA-580 Inlet Precise Brass Flow Meter

[APPLICATIONS] - Our gas pressure regulator/flowmeter can be used with a variety of gas cylinders including argon, helium, nitrogen, and argon/carbon....
[CGA580 CONNECTION] - The Flow Meter Regulator is suitable for standard Gas tanks with CGA-580 inlet connection, with a unique filter port design on....
[MEASUREMENT UPGRADE] - The 4000PSI gas meter is more widely used than 3500PSI. If you need to measure more corrosive gases, facing some special....
[RELIABLE QUALITY] - The body of our gas flow meter is made of high-quality brass to withstand harsh environments and have a longer life. The....
[PACKAGED WITH HOSE] - Our argon regulator package comes with a 2m/6.6 Ft hose that will completely protect you from injury in adverse conditions and....

Check Stock

LZQ-7 Flowmeter 2-20LPM Acrylic Air Gas Flowmeter with Control Valve for Measuring Controlling Gas Flow

This gas meter is connected to hose to measure unidirectional gas flow.
Made of high quality acrylic, it is transparent and can hold up to 0.6MPa pressure.
It is simple to use, and has 8mm barbs for convenient connection to hoses.
Can measure blast furnace gas, coke oven gas, coal gas, air, nitrogen, acetylene, phosgene, hydrogen, natural gas, liquefied petroleum gas, hydrogen peroxide, flue gas, methane, butane, chlorine gas, methane, carbon dioxide, , compressed air, argon.
Mainly used for detecting the flow, control flow and can be used in industry.

Check Stock

Gas Flowmeter, LZQ-7 Flowmeter 1-10LPM Flow Meter with Control Valve for Oxygen Air Gas

INSTRUCTIONS -- This gas meter is connected to hose to measure unidirectional gas flow.
MADE OF HIGH QUALITY ACRYLIC -- Made of high quality acrylic, it is transparent and can hold up to 0.6MPa pressure.
IT IS SIMPLE TO USE -- It is simple to use, and has 8mm barbs for convenient connection to hoses.
MEASURABLE GAS -- Can measure blast furnace gas, coke oven gas, coal gas, air, nitrogen, acetylene, phosgene, hydrogen, natural gas, liquefied petroleum gas, hydrogen peroxide, flue gas, methane, butane, chlorine gas, methane, carbon dioxide, oxygen, compressed air, argon.
MAINLY USED FOR -- Mainly used for detecting the oxygen flow, control oxygen flow and can be used in industry.

Check Stock

Argon Co2 Professional Gas Flow Meter Tester Flowmeter peashooter for Mig Tig Welder Welding

Professional Ggs Flow Tester / Meter Peashooter Style.
Flowmeter tester scaled from 0 - 25 litres per minute in one litre graduations, used for testing the gas flow at the Mig or Tig torch.
Simply place the tester over the Mig or Tig gas nozzle and the gas flow is measured from the top of the ball, can be used for all gases..
Designed to check gas flow on Tig or Mig torches..

Check Stock

Argon CO2 Regulator, Tig Mig Welding Regulator Argon Flow Meter with 6.6Ft Gas Hose CGA-580 Inlet 0-3500PSI Pressure Gauge 10-60 CFH

CGA580 CONNECTION - The argon regulator/flowmeter is suitable for standard Gas tanks like argon, CO2, and helium with CGA-580 inlet connection, and has a unique filter port design on the CGA-580 mounting port..
PRECISE CONTROL & MEASUREMENT - Our argon CO2 regulator equipped with a flow meter and pressure gauge. Output flow is indicated by a ball in the flow tube and is adjustable from 10 to 60 SCFM (standard cubic feet per minute).The pressure gauge ranges from 0 to 3500 PSI and is used to read the amount of gas remaining in the tank..
RELIABLE QUALITY - The bodies of our argon flow meter is made of high-quality brass to withstand harsh environments and have a longer life. The flowmeter tube and protective cover are made of impact-resistant composite material for safety and durability..
APPLICATIONS - The gas pressure regulator can be used with argon, CO2 and helium. Ideal for MIG TIG welding, chemical and electronics industry. The welding gas regulator is an economic alternative for the customers who wants more precise gas metering..
PACKAGED WITH HOSE - Our argon regulator package comes with a 2m/6.6 Ft hose that will completely protect you from injury in adverse conditions and keep your tank a safe distance from your welding project..

Check Stock

Dual Output Argon/CO2 Gas Regulator Flow Meter for TIG MIG Welding 10-60 SFCH 0-4500 PSI CGA 580 Inlet Connection 5/8 x 18 RH Outlet Fitting

【CGA-580 Bottle Inlet Connection】The CGA-580 Bottle Connection fits standard argon, helium, nitrogen, and argon/CO2 style gas bottles from any....
【Outlet Connection】The welding gas regulator applicable for female 9/16" x 18 nut or male 5/8" x 18 fitting, equipped with 1/4" Hose barbed....
【Precise &Fast】0-4500 PSI. The high pressure gauge allows you to view how much gas is left in the argon cylinder.The CO2 flow meter is adjustable....
【Premium Quality】The argon gas flow meter is made of high-quality brass, and strict tested to guarantee long life. It can greatly prevent gas....
【Perfect for MIG and TIG Welding 】The Argon CO2 welding regulator compatible with kinds of gases, it will be an economic alternative for demanding....

Check Stock

STYDDI 3 Feet Low Pressure Propane Regulator and Hose with Propane Tank Gauge, Universal QCC1 Replacement Hose with Regulator for Most LP Gas Grill, Heater and Fire Pit Table, 3/8 Female Flare Nut

NO NEED TO BUY EXTRA GAS METER & SAVING YOUR MONEY. This upgraded 3 FT braided low-pressure propane hose and regulator assembly is equipped with tank gauge level indicator, allows you to monitor the fuel level without necessarily removing the tank. The color-coded dial lets you see when your propane gas level is low at a glance without spending more money on extra gas meter..
CSA CERTIFICATED & BUILT-IN EXCESS FLOW PROTECTION FOR YOUR SAFETY. CSA certificated ensures secure, airtight connection between grill and tank. When your propane gas left in your tank too low, or the capacity flow of your appliance exceeds this regulator's Max. flow capacity too much, it will shut off the gas flow automatically..
EASILY INSTALL WITHOUT A HITCH! Please DOUBLE CHECK your appliance connection is 3/8" MALE FLARE FITTING CONNECTOR. Insert the black plastic fitting and rotate clockwise to your QCC1/Type 1 propane tank connection place. Then connect the regulator hose end connect to your 3/8" male flare connector propane appliance. Its compatible with your 20-50 lb propane gas tank..
UNIVERSAL FOR MOST LOW-PRESSURE GAS PROPANE APPLIANCE. QCC1/QCC/Type 1 hose and regulator replacement for Weber Genesis 300-series, Genesis Silver C, Genesis Gold, Genesis Platinum, Spirit E....

Check Stock

Tube Type Acylic Flowmeter, Air Flowmeter Oxygen Flowmeter,LZQ-5 Flowmeter 2.5-25 LPM Flow Meter with Control Valve for Oxygen/Air/Gas

【FUNCTION】- This gas meter is connected to hose to measure unidirectional gas flow..
【QUALITY MATERIALS 】- Made of high quality acrylic, it is transparent and can hold up to 0.6MPa pressure..
【EASY TO USE】- It is simple to use, and has 8mm barbs for convenient connection to hoses..
【WIDE USE】- Mainly used for detecting the oxygen flow, control oxygen flow and can be used in industry.Can measure blast furnace gas, coke oven gas, coal gas, air, nitrogen, acetylene, phosgene, hydrogen, natural gas, liquefied petroleum gas, hydrogen peroxide, flue gas, methane, butane, chlorine gas, methane, carbon dioxide, oxygen, compressed air, argon, toluene, benzene, xylene, hydrogen sulfide, sulfur dioxide, ammonia, etc..
【PROFESSIONAL AFTER-SALES SERVICE】- We guarantee the product is 100% brand new. Please feel free to contact us if you have any problems about our product, then we will make every effort to resolve it for you,and give you a satisfactory answer..

Check Stock

RX WELD Argon/CO2 Mig Tig Flow Meter Gas Regulator Gauge Welding Weld

1.VERSATILE APPLICATIONS FOR CGA-580 Tanks: This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet).
2.Accurate Gas Flow Gague：Adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube..
3.RELIABLE QUALITY - Our argon flow meter's body is made of high-quality brass, which can withstand harsh environments..
4.OUTPUT:Will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting.It also comes with a standard 1/4" barbed fitting.
5.DESIGNED and PERFECT for MIG and TIG Welding Applications. Our Flowmeter is an economic alternative for the demanding customers who wants more precise gas metering..

Check Stock

RX WELD Argon Mig Tig Flow Meter Gas Regulator Gauge with Gas Hose Welding Weld

1.VERSATILE APPLICATIONS FOR CGA-580 Tanks: This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet).
2.Accurate Gas Flow Gague：Adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube..
3.RELIABLE QUALITY - Our argon flow meter's body is made of high-quality brass, which can withstand harsh environments..
4.OUTPUT:Will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting..
5.Hose Included: RX WELD 6.6Ft Hose Quick Connect Fitting enable your tanks at a safe distance from your welding projects..

Check Stock

Fill-Rite FR711VA Cast Iron 115V AC Fuel Transfer Pump with Discharge Hose, 901-Gallon Meter, and High-Flow Automatic Nozzle, Red

HIGH-FLOW FUEL TRANSFER: Rotary vane high-flow fuel transfer pump designed for gas, diesel, and biodiesel.
MADE IN THE U.S.A.: High-flow pump features heavy-duty cast iron construction.
EASY TO USE: Easy-to-read 4 digit mechanical meter.
30-minute duty cycle with 20GPM flow rate.
NOZZLE INCLUDED: Fuel pump with an iron rotor and carbon vanes.
includes a 1-inch x 18-foot static wire and high flow automatic nozzle.
1/3 HORSEPOWER: Flow pump with a 901-gallon meter and 1/3 horsepower motor.

Check Stock

6.56FT Inert Gas Welding Hose, Argon Flowmeter Gas Regulator Welding Hose, TIG MIG Gas Hose, 5/8\ UNF-18RH Fittings

Premium rubber material, high-quality toughness, environmentally friendly, non-toxic, harmless to the human body..
Inert Gas Welding Hose Argon CO2 Flow Meter Regulator Adapter Hose 5/8" UNF-18RH Fittings 6.56 10 15 20 30 FT.
The hose length is 6.56 Feet, crimped standard 5/"8 UNF-18RH inert gas fittings on each end. 300PSI Working Pressure - 600PSI Burst Pressure. High pressure resistance, wear resistance, tear resistance, tortuosity resistance, hard to harden in cold weather..
The hose connector compatible with argon, argon/CO2 mixture, helium and any other welding gases, suitable for various TIG and MIG welding machines..
Best suitable for our OYHBO Argon Flow Meter Regulator. If you want to purchase the Regulator together, you can ask our customer service. Thanks!.

Check Stock

OYHBO Argon/CO2 Flow Meter Gas Regulator Guage for TIG MIG Welder Welding Gas-saving CGA580 Inlet

...ssure and leaking during use, make your welding more safer..
✔Heavy Duty&Rust-proof - Our Argon CO2 Gas Regulator features heavy duty brass body, which can withstand harsh environments. Its base is made of qualified aluminium alloy, not get rusty and longer using-life..
✔Ideal for TIG/MIG Welding - Our argon flow meter gas regulator is accurate and efficient by professional design, ideal for TIG/MIG welding, cutting, chemical and electronics industry. If for any reason you're not 100% SATISFIED, please let us know. We will provide you with the best solution.Thanks..

Check Stock