Top Gardner Inlet Gasket Reviews

3/8' X 3/8' X 1/2' 3 Way Adapter T Connector ,T Shape Adapter for Handheld Sprayer or Bidet,Add Sprayer to Toilet

  • Bidet Adapter: US 3/8" female thread connects to the angle valve, US 3/8" male thread connects to toilet water supply (3/8" to 7/8"), G1/2" male thread connects to hand Bidet Sprayer Hose/Shower Hose.
  • Note thread diameter:Please make sure your bidet inlet pipe is 1/2" first, otherwise it will not work, 1/2" male thread diameter is 20.45 mm 3/8" female thread diameter is 13.29 mm, please buy after confirmation.
  • Included Gasket: The included rubber gasket provides a better seal and must be used during installation.
  • Movable nut: The female thread is a movable nut, just rotate the nut when it is close to the wall.
  • T-Type: The adapter has 3 outlets, which can be used as one water inlet, two water outlets, providing new outlets for bidets, faucets, washing machines.
Check Stock

Trash Can Cyclone Lid

  • Cyclone style lid fits on a most 30-gallon metal trash cans.
  • Features a foam gasket for a superior seal.
  • Elbow fitting on inlet side to induce cyclonic air flow - Rugged ABS plastic for durability.
  • WoodRiver is proudly made by Woodcraft, America’s leading supplier of saws, planes, power tools, hand tools, wood stain and paint, routers, sanding, wood, kits, dust collection and more. Our award winning family of brands includes WoodRiver, Highpoint, Woodcraft and Woodcraft Magazine as well as the greatest selection of woodworking books, videos, and plans..
Check Stock

Taytools 114970 2-1/2 Inch Dust Collection Cyclone Separator Lid for 5 Gallon Pails Buckets Trash Cans

  • Convert dust collector to two-stage unit with this lid and 5 gallon bucket.
  • Inlet and outlet ports accept a 2-1/2” ID hose.
  • Features a foam gasket for a superior seal.
  • Elbow fitting on inlet side to induce cyclonic air flow.
  • Made from strong ABS plastic for durability.
Check Stock

MAHLE Original 41940.030 Ford 6.0L Power Stroke & Navistar VT275/365 & MaxxForce 5 0.030\ Piston Ring Set, 8 Pack

  • THIS KIT INCLUDES: Piston Set, Piston Ring Set, Main Bearings Set, Rod Bearings Set, Head Gasket Set, Lower Gasket Set, Freeze Plug Set (Brass), Cam Bearings, Timing Chain Kit, Oil Pump.
  • FITS: 87-90 Cadillac, Chevrolet, Pontiac / Brougham, Camaro, Caprice, Firebird 5.7L V8 OHV Naturally Aspirated.
  • FITMENT NOTES: w/ Oil Pump & Timing Belt Or Timing Kit If Applicable, Dish Pistons, Master Kit, w/ 3/4 Inlet Pump, w/ 3/4 Inlet, w/o IG3173, w/ Oil Pump & Timing Belt Or Timing Kit If Applica.
  • You are assured to receive a worldwide proven Master Engine Rebuild Kit quality part with OE quality fit and performance..
  • IMPORTANT: This Engine Kit is in STANDARD SIZE in all of its components. If you need oversized Pistons, Piston Rings, Rod Bearings or Main Bearings, send us a message prior ordering, indicating the correct size you need, so our customer service team can confirm availability. If we do not receive communication from you, everything will be sent in STANDARD SIZE by default.
Check Stock

Turbo Rebuild Kit Repair Kit for Garrett T2 T25 T28 TB02 TB25 TB28 Turbocharger 360 Thrust Bearing Dynamic

  • Fit with Garrett T2 T25 T28 turbine flange.
  • Professional installation is highly recommended.
Check Stock

Mechanics Car Engine Pieces Cars Lovers - Muscle Cars T-Shirt

  • High Class Quality, Very Durable, Good Working Condition, Easy To Install..
  • Replace Part Number: EAE9510D B4NN9510A TSX580 TSX428 B2NN9510A EAE9510C..
  • Replacement for Ford NAA NAB 600 620 630 640 650 660 700 740 800 820 840 850 860 tractor models..
  • Package include: 1x carburetor with gasket and bolts..
  • The carburetor mounting studs measure 2.24 inch center to center, throttle bore throat size measures 1.06 inch diameter, the choke air horn (air inlet) measures 1.625 inch OD, fuel inlet measures 0.125 inch NPT..
Check Stock

Abn Outdoor Marine Electrical Power Male Inlet Socket Box 50A 125/250V w/Connector, Twist Lock Plug Cord Cover, Ring

  • ... safe and detachable power connection.
  • Designed to secure and protect your cord connector and keep a weatherproof seal for your RV, camper, trailer, marine watercraft, and other outdoor applications.
  • For regulating and waterproofing purposes.
  • Package includes (1) traditional stainless steel shore power inlet with a gasket cover + (1) plug protector cover + (1) ring.
  • FITS YOUR APPLICATION: 50 Amp, 125/250 Volt white square inlet that quickly locks the cord set to the inlet.
  • Cover includes side grips for an easy and secure connection.
  • Designed for use with round jacketed, hard usage cable (S-type), 8-3AWG.
  • PERFECT SIZE: Inlet – 2.2-inch (5.6cm) inner diameter (ID).
  • 3-inch x 3.5-inch (7.6cm x 8.9cm) outer width.
  • Cover and ring – 2.4-inch (6.1cm) inner diameter (ID).
  • Connector – Approximate measurement across the face is 2 inches (5.1cm).
  • Across the back where the cord enters adds 0.25 inch (2.25 inches / 5.7cm across).
  • BUILT TO LAST: 50 Amp 125/250 Volt rating.
  • Inlet constructed from corrosion-resistant plastic and stainless steel materials for strength and longevity in harsh marine env....
Check Stock

Oneida Air Systems Super Dust Deputy (4/5 DIY)

  • LONGER LIFERSPAN - Prevents fine dust and large debris from reaching your dust collector, prolonging the lifespan on your filter and reducing the need for cleanings..
  • HIGH EFFICIENCY - Integrated air ramp and neutral-vane inlet provide ultra-high efficiency..
  • SIZED RIGHT – Retrofits on 1 HP – 3 HP single-stage dust collectors. 4/5 Cyclone with included adapters offers 4 or 5" OD inlet (connects to your tools) and 4 or 6" OD outlet (connects to your collector). Approximately 23" height..
  • EASY INSTALLATION - Compatible with almost any dust collector, the lightweight and compact design makes for fast and simple installations. Ready out of the box to connect to your dust collector with either a 4” or 6” hose, and to your tools with either a 4” or 5” hose. Includes cyclone, 2x reducer adapters, assembly gasket and hardware..
Check Stock

30 Amp Power Inlet Box, Briidea NEMA 3R Generator Inlet Box with 5 Preserved Holes, NEMA L14-30P, 125/250 Volt, 7500 Watts Generator Transfer Switch, Weatherproof for Outdoor Use

  • ...lation and wiring process is easy and fast. Four pre-reserving holes on different areas（side, top and back）could be directly connect to transfer switch and electric panel from multi directions. And three standards apertures are provided for your various requirements: 1/2 inch, 3/4 inch, 1 inch. Easily screw the gasket, save energy!.
  • WEATHERPROOF & ANTI-RUST: The generator inlet box is made of decent steel material, and the whole metal body is covered by anti-rust powder coating, rustproof, waterproof and dust-proof, meanwhile the plug is also equipped with a waterproof cover, providing the best protection in any bad weather!.
  • LARGER SPACE: Larger space makes the whole installation process easier and faster, furthermore, the heat dissipation will be better and a longer service life is guaranteed. 10 AWG wire supported in max..
Check Stock

Carbhub Carburetor for Stihl MS210 MS230 MS250 021 023 025 Chainsaw Carb

  • Fits Stihl MS210 MS230 MS250 021 023 025..
  • Brand new and high quality aftermarket carburetor..
  • Package list: 1x Carburetor, 1x Fuel line, 1x Oil line, 1x Spark plug, 1x Gasket, 1x Fuel filter, 1x Air filter, 1x Impulse line, 1x Oil filter, 1x Intake manifold inlet.
Check Stock

Money Tree

  • ...es like Rigid, Shop Vac, Vacmaster, Dewalt, and many other brands. The hoses will fit male into the 2.375” inlet. The outside of the inlet and exit to the vacuum are designed to accept popular 2.5” dust collection wire support hoses commonly used in home and commercial workshops.
  • Commercial grade rubber mounting gasket insures against air leaks that can rob performance.
  • Ideal for use in a broad range of applications including woodworking, auto body detail shops, commercial painters, sheet rock installation and repair, remodelers, construction clean-up contractors, stone counter top production shops, hard wood floor refinishers, liquid capture, gardening, and slurry collection.
Check Stock

POWERTEC 70299 Dust Collection Cyclone Separator Lid for 5 Gallon Dust Collector Bucket Canister w/ 2-1/2 Inch Hose Ports, Elbow Fittings

  • INCLUDES: (1) Dust Separator Lid and (1) 2-1/2” OD 90 degree elbow.
  • FUNCTION: Converts your single stage dust collector into a two-stage unit when used in conjunction with 5 gallon bucket/ common trash can - Collects large workshop sawdust, drywall dust, concrete dust, wood chips and heavier shavings before they reach your impeller and collection bags.
  • FEATURES: An impressively high-caliber seal with foam gasket and increased cyclonic airflow efficiency with elbow friction fitted underneath the inlet side.
  • COMPATIBILITY: Lid inlet and outlet ports accept 2-1/2” ID hose and fits 5 gallon buckets with maximum diameter of 11-3/4".
  • PREMIUM BUILD: Made with high quality ABS plastic - possessing long term durability, impact resistance and shock absorbance made to withstand the abrasive nature of dust collection.
Check Stock

Flowmaster 817680 American Thunder Cat-Back Exhaust System Black

  • ☑️ QUALITY MATERIAL: C.N.C machined graphite-coated aluminum.
  • ☑️ WELL DESIGNED: 2.5" inlet/outlet 2-bolt exhaust gasket.
  • ☑️ TROUBLE-FREE INSTALLATION: Requires no modifications..
  • ☑️ COMPLETE SATISFACTION: We offer a 30 day money back guarantee and a 90 day replacement/exchange warranty..
  • ☑️ Fitment Info: Compatible with most import & export vehicles with 2.5" in/outlet 2-bolt exhaust flange only..
Check Stock