Top Galvanized Pipe Strap Reviews

Oatey 33402 Mechanical Test Plug, 3 in, 5 Psi Back, Plastic, 110 Deg F, 3-Inch, Red

End of Pipe Gripper plugs are made with ABS glass-reinforced plates for added strength.
Extra large zinc wing nut for ease of tightening, no wrench required, and will not rust.
Natural rubber O-ring for excellent expansion and memory.
Plug is rated for 17 PSI or 40-ft of head pressure.
End-of-pipe seals only at the end of a pipe, preventing plug from falling into stack.
Galvanized carriage bolt to prevent corrosion.
Galvanized mechanical plugs have a wide usage range making them effective on most piping material.
Maximum allowed air is 5 PSIG on plastic and 2 PSIG on galvanized.
Plastic mechanical plugs are premium plugs designed to hold higher pressures.

Check Stock

STRUT 3/4\ CONDUIT CLAMP by UNISTRUT MfrPartNo RP1212EG

QUALITY AND DURABILITY – These 3/4-inch snap-on conduit straps are crafted from galvanized steel with a zinc coating that forms a protective layer. With its reinforced rib, this EMT one-hole pipe strap provides extra strength and durability..
EASY INSTALLATION – These one-hole design snap-on conduit straps are extremely simple to use. Simply snap the strap onto your conduit and use a screw to secure it onto any surface. They are perfect for both indoor and outdoor applications..
ACCURATE SIZES – Our Snap-On conduit straps are available in many sizes to fit many different pipes, cables, hoses, and tubes. Choose from a selection of 1/2 Inch, 3/4 Inch, 1 Inch, 1-1/4 Inch, 1-1/2 Inch, and 2 Inch sizes..
VERSATILE – These snap-on straps can be used for a wide variety of tubes or pipes that range anywhere between EMT conduits to pipes, tubes, cables, and hoses..
WHY CHOOSE AIRMONT PRODUCTS? ABOUT US - Airmont Products manufactures a fine line of top-quality electrical supplies. Our EMT snap-on pipe straps are especially recognized as being durable, versatile, and easy to install. Customer satisfaction is our priority. Let us know how you liked this product!.

Check Stock

Generic Metal Storm Collar (16 Inch)

QUALITY: This storm collar is designed to cover metal flashings to divert water from running down the sides of the pipe. It is constructed using heavy 26 gauge galvanized steel.: This storm collar is designed to cover metal flashings to divert water from running down the sides of the pipe. It is constructed using heavy 26 gauge galvanized steel..
EASY INSTALLATION: This metal storm collar contains an adjustable tab. Simply bend tab over for a quick and secure fit..
MULTIPLE SIZES: This item is available in sizes ranging from 3 Inches to 18 Inches in inner diameter.

Check Stock

Midwest Hearth Poly Chimney Cleaning Brush (8-Inch Round)

POLYPROPYLENE BRUSH - Stiff poly bristles clean coal and soot from metal stove pipes, flue, and chimneys.
GALVANIZED STEEL STEM - Heavy duty double-spiral stem for long-lasting durability.
1/4 INCH NPT FITTINGS - Features 1/4" male pipe threads for use with our fiberglass rod kits (sold separately).
PROFESSIONAL QUALITY - Superior components provide excellent performance.
MADE IN USA - Quality manufactured in the Midwest!Description Chimneys should be cleaned at least once a year, and more often if you use your fireplace frequently. Midwest Hearth Poly Chimney Brushes are designed to be used with metal chimney flue to help prevent scratching and marring of the steel pipe. Measure the inner diameter of your flue and order the same size brush: 6" Round or 8" Round. Our chimney brushes are professional quality and feature stiff polypropylene bristles and a heavy duty galvanized steel stem. The brush will have 1/4-Inch male pipe threads at the end that may be attached to extension rods. Midwest Hearth offers an 18-Foot fiberglass rod extension kit that is compatible with these brushes (sold separately)..

Check Stock

(Pack of 50) AP-10451, 3/4 Inch Two Hole Snap On Pipe Strap for EMT Conduit Installation, Reinforced Rib for Extra Strength, Galvanized Zinc Plated Metal, Tension Clamp for Easy Snap-On

QUALITY AND DURABILITY – These 3/4 inch Snap-On conduit straps are crafted from galvanized steel with a zinc coating that forms a protective layer. With its reinforced rib, this EMT two-hole pipe strap provides extra strength and durability..
EASY INSTALLATION – These two-hole design snap on conduit straps are extremely simple to use. Simply snap the strap onto your conduit and use screws to secure it onto any surface. They are perfect for both indoor and outdoor applications..
ACCURATE SIZES – Our Snap-On conduit straps are available in many sizes to fit different pipes, cables, hoses, and tubes. Choose from a selection of 2 inch, 1-1/2 inch, 1-1/4 inch, 1 inch, 3/4 inch, or 1/2 inch sizes..
VERSATILE – These snap-on straps can be used for a wide variety of tubes or pipes that range anywhere between EMT conduits to non-insulated ferrule..
ABOUT US - Airmont Products manufactures a fine line of top-quality electrical supplies. Our EMT snap-on pipe straps are especially recognized as being durable, versatile, and easy to install. Customer satisfaction is our priority. Let us know how you liked this product!.

Check Stock

Rectorseal 25631 4-Ounce No. 5 Pipe Thread Sealant

RECTORSEAL 5 pipe thread sealant multi-purpose, 1/4 pint – R514.
Soft set slow drying compound which seals, lubricates and protects threaded pipe and fittings.
Can be pressurized immediately for piping up through 2″ and 100 psi for natural gas, air and water only.
Ideal for application with a wide variety of fluids and gases including potable water applications.
Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced and PVC pipe.

Check Stock

9-12MM Cable Pulling Socks Grips Wire Mesh Puller Socks Grip Mesh Puller Cable Puller Socks

9-12MM: In color Red, force 700lbs(317kgs), weight 20g, length 310mm..
MATERIAL: Steel galvanized single strand preparation, anti rust, long used and durable..
DESIGN: Eye mesh design, single wave galvanized mesh cable socks, keep your cable from scratching, anti slip, easily grip the cable through the pipe line, the wall or the telecom..
CABLE SOCKS: Great tools for electrician, it is soft, and you can bend it. (But be careful, please do not bent it right angle.).
APPLICATION: Different size suits for cable with different diameter, by using in pipe cable laying and cable pulling..

Check Stock

EZ NP-72-200 Non-Penetrating Roof Mount with 2\ x 72\ Mast w/Roof Mat

This DBS pipe is specifically designed to support your DBS dish for ground level installations.
This pipe is galvanized to resist rusting and oxidation.

Check Stock

Pack of 2 Butt Joint Narrow Band Exhaust Seal Clamp Muffler Clamp Band Stainless Steel Connection for Cars (2IN)

The band clamp is a wide band of metal, usually stainless steel, wrapped around the exhaust pipe joint. Our products are preformed rings and are now more commonly used in high-end aftermarket car systems that use slip fit because they are relatively inexpensive and can be reused without damaging the pipe..
The butt strap clamp is a simple and effective way to connect car system components such as pipes, mufflers and catalytic converters. Offering unique sealing and high clamping loads, it does not distort your exhaust components and provides flexible removal and repair..
Distribute the clamping force evenly over the entire 360° range to prevent leakage and control material deformation. It is easy to install or disassemble with one bolt, saving time and effort. T-304 strip stainless steel and carbon steel galvanized hardware..
Available in a wide range of styles and sizes. You would better measure before pruchase. These clamps feature unitized construction which minimized part number complexity and maximizes material efficiency for reduced weight..
Maximum Diameter: 2", Band Width: 1 1/4" (1.25").

Check Stock

LGXEnzhuo Pipe Cutter Pipeline Hydraulic Pipe Cutting Machine Fire Steel Pipe Cutting Machine Can Cut Pipe Diameter 40-280mm 220V 750W

【WIDE APPLICATION】Pipeline hydraulic pipe cutting machine is used for ordinary steel pipe galvanized pipe, plastic-lined pipe, spiral pipe and seamless steel pipe cutting. Widely used in pipeline construction related to fire protection, construction, water supply mines, coal mines, etc..
【PARAMETER】Diameter of steel pipe that can be cut:40-280mm.
The wall thickness of the steel pipe that can be cut:3-6mm.
【HIGH EFFICIENCY】Copper motor, power 750W, with high efficiency, stable performance and long service life..
【HIGH STRENGTH BLADE】High strength blade is made of high quality steel to ensure good cutting effect..
【DURABLE】Thicker roller, more wear-resistant.Strong, sturdy frame, suitable for heavy duty operation..

Check Stock

OhLectric OL-43183 Two Hole Rigid Pipe Strap - Sturdy Steel Strap clamps - Zinc Plated Steel - Reinforced Rib - Corrosion Resistant - Easy To Install - 1 Inch (Pack of 25)

HIGH-QUALITY MATERIAL: Engineered with premium quality top grade material, Ohlectric’s two hole pipe strap is made to last for a long time and is highly durable. This metal strap is used when extra load bearing is needed to attach the conduit to wood, masonry or alike surfaces..
EXTRA STRENGTH FOR PIPES: This metal pipe strap has a snap-in feature with a ribbed design which gives extra strength to this 2-hole rigid pipe strap. The sturdiness of this pipe strap makes it ideal for industrial usage. The Reinforced Hole on this strap gives more strengthening support to the pipings..
GREAT RESISTANCE: Iron straps easily get rust when used on the plumbing pipes. To avoid this we have made this strap from zinc-plated steel which is highly resistant to corrosion. Highly corrosion resisting property of this rigid pipe strap makes it an ideal accessory for outdoor applications..
EASY TO INSTALL: You can easily fix this two-hole rigid strap over the pipes using the snap-in installation feature. Without the help of complex tools or costly technicians, you can secure your conduit over any surface. This metal strap holds the pipe secur....

Check Stock

INTSUPERMAI Pipe Cutter Round Pipe Cutting Machine Pipeline Hydraulic Ppipe Cutting Machine Electric Hydraulic Fire Pipe Galvanized Pipe Cutting Machine 220V

Pipeline hydraulic pipe cutting machine is used for ordinary steel pipe galvanized pipe, plastic-lined pipe, spiral pipe and seamless steel pipe cutting. Widely used in pipeline construction related to fire protection, construction, water supply mines, coal mines, etc..
Diameter of steel pipe that can be cut:40-280mm, The wall thickness of the steel pipe that can be cut:3-6mm, Jack load:5T, Power:750W, Voltage:220V.
Automatic return design: Rotate 90° clockwise to tighten the hydraulic oil valve, then press the handle down, turn 90° counterclockwise to loosen the hydraulic oil valve, and the cutting blade returns to its original position.
Triangle bracket: stable bracket with roller design, adjustable roller distance, suitable for different pipe diameters, adjustable bracket height, easy to lay the tube flat and cut the tube without deviation.
Comes with five roller, which is suitable for cutting pipes of different sizes..

Check Stock

Eastman 1 Inch IPS Pipe Repair Clamp, 3 Inch Length, Stainless Steel, 45185

PIPE REPAIR CLAMP: Pipe repair clamp tool is designed for use on steel, copper, and plastic pipes, and is perfect for providing repairs to the pipes which suffered puncture, pinhole, or split.
creates a positive seal that won't collapse on Schedule 40 PVC.
DURABLE: Pipe clamps are crafted from strong and sturdy 301 stainless steel for long-lasting reliability.
WHAT IS INCLUDED: Metal pipe clamp is equipped with a high quality rubber gasket that will not deteriorate, and includes galvanized iron lugs which protect against rust and corrosion.
SPECS: Pipe fitting clamp features a 1 Inch IPS connection, and can withstand temperatures of 20 degrees F to 180 degrees F.
PREFERRED BY THE PRO: Our tools and plumbing supplies are perfect for both home owners and professional contractors.

Check Stock