Top Galvanized Anchor Bolts Reviews

MarineNow Deluxe Portable Fluke Style Anchor Kit Choose 5, 8.5 or 13 lb (13 lb)

  • 13 lb Hot Dipped Galvanized Fluke Anchor for Boats 20 - 32ft.
  • 98' Anchor Line - three strand - 3/8" (10mm) with stainless steel rope thimble (316 marine grade).
  • 6.5 Feet of 5/16" (8mm) chain - Hot Dipped Galvanized.
  • 2 3/8" 10mm Shackles - Hot Dipped Galvanized.
  • Anchor measures 24.5" tall, 18" wide, and 6" deep..
Check Stock

VEVOR Anchor Chain, 10' x 5/16" Galvanized Steel Chain, 3/8" Anchor Chain Shackle, 11650lbs Anchor Lead Chain Breaking Load, 9460lbs Anchor Chain Shackle Breaking Load, Anchor Chain for Boats, Ship

  • 【DURABLE GALVANIZED STEEL】- Our marine 10 feet boat anchor chain is made of galvanized steel 5/16" with two 3/8" bow buckles. Chain break load: 11,650 lbs. Shackles break load: 9,460 lbs. Increased durability of our chain will help properly set your anchor for years to come with superior construction..
  • 【6" EXTENDED ANCHOR CHAIN】- The heavy boat anchor chain has an additional 15 cm/6 inch based on 10 feet, which is convenient for you to use. If you are looking for a more reliable anchor chain, this is your solution..
  • 【TWO QUALITY BOW SHACKLES】- Large 3/8" galvanized steel bow shackles are designed to work with almost all anchor lines. Our thread bow shackles to avoid loosening and falling from the anchor chain..
  • 【RELIABLE ANCHOR CHAIN】- The use of an anchor lead chain enhances the anchor's holding power by keeping the shank parallel to the lake bed or seafloor, helping to eliminate unwanted pull-out or anchor freeing caused by wave motion or boat drifting..
  • 【WORK WITH DIFFERENT ANCHORS】- Our anchor chain can be used with almost all boat a....
Check Stock

30 pcs Molly Bolts, M6*52 Metal Drywall Anchors, Zinc Plated Steel Molly Bolt for Plaster Walls, Hollow Door Anchor (M6*52)

  • Metal hollow wall anchor: include 30pcs M6*52 molly bolts heavy duty dry wall anchors, it's screw diameter is about 6mm/0.23inch, anchors length is about 52mm/2.04inch, and fits for 18-28mm thick board..
  • Sturdy and durable: M6*52 plaster wall anchors is made of high-density carbon steel, provides great load-bearing capacity. The surface is galvanized for better corrosion and rust prevention..
  • Easy to install: with the anchor setting tool, it's more easily to open the support bracket, and each bracket is evenly stressed to provide a good load-bearing capacity, providing a reliable anchoring effect.
  • Multi-purpose: M6*52 dry wall anchors can be widely used in drywall, hollow block, plaster, tile, perfect for installing light fixtures such as lamps, curtain rods, photo frames, coat racks, power switches..
  • Product recommendation: to achieve better installation results, could use FOREVTL professional drywall anchor setting tool, it is made of thickened REINFORCED CARBON STEEL, anti-corrosion and resistant to deformation at the same time, 6.9 inch long, with spring reset design, better labor-saving and easier to use, easily finish the nailing work by using one hand..
Check Stock

Extreme Max 3006.6572 BoatTector Galvanized Steel Anchor Lead Chain - 5/16" x 5' with 3/8" Shackles

  • 5/16" x 5' galvanized steel anchor lead chain.
  • Working Load Limit: 2,000 lbs./Breaking Strength: 8,000 lbs..
  • Lead chains enhance anchor holding power and limits abrasion between the anchor and anchor line.
Check Stock

WindRider Boat Anchor Kit - Fluke Style Boating Anchors for Sand - Boat Anchor Rope and Chain - 20-30ft Boats Fortress Anchor - Heavy Duty Boat Anchor - Fluke Anchor Kit - Marine Boat Anchor

  • Galvanized Steel Boat Anchor: For Medium boats (20-32ft) this is a perfect plug and play kit. No more worrying about buying the boat anchor rope and chain, splicing the line to the chain, drilling a hole for easier retrieval. Just order this and go..
  • Super Holding Power: Fluke style boat anchors are perfect anchors for sand or mud bottoms. The flukes articulate and will dig into the bottom, allowing these relatively lightweight fluke anchor kit to hold tight. Just make sure you give it the opportunity to bury into the ground..
  • Boat Anchor Fluke Style: Sometimes pontoon boat anchor kit get hung up and nothing is worse than having to cut your line because you can't free it. We predrill a recovery hole so you can recover it (without scuba gear) if it does get stuck. We drill the hole and then galvanize it, so you don't have to worry about rust and corrosion or drilling the hole yourself. We recommend setting up the anchor like the image using zip ties, so if you need to break it free you are able too...
  • Everything You Need Included: 100ft of 3/8in triple strand nylon rope that has an eye splice. 2 - 3/8in Hot dip galvanized bow shackles with holes for wiring shut. 8ft 5/16in hot dip galvanized chain. 1 Hot Dipped Galvanized Steel Fluke danforth anchor....
Check Stock

AUTOBOTS 1/2" D Rings for Trailers Heavy Duty Trailer Tie Down Rings,Max 12,000 Lbs,Includes All Mounting Hardware, Forged Steel Bolt-on D Ring,Large Trailer Tie Down Anchor Points 2 Pack Black

  • ...wn Anchor Points Provided with 2 Sets of D-Ring Welded to the Backing Plate, and 2 Backing Plates of the Same Size, 8 Bolts Grade 10.9, 8 Nuts Grade 10.9, Drill to Install in Minutes.
  • 【Top Quality Material】：Trailer Tie Downs is Made with Heavy Duty Drop Forged Steel, Galvanized and Power Coated, Solid and Strong, our d ring tie downs Also Prevents Rust and Corrosion. Its Break Strength Reaches Up to 12000lbs.
  • 【Widely Used】：Bolt D Ring Anchor Are the Most Convenient and Flexible Tie-down Device Available. Often Used As Mooring Anchors on Trucks, Trailers, Pickups, Campers, Vans, Docks, Boats, Excavators, Flatbeds , Garages, Warehouses and Workshops.
  • 【More Professional and Reliable】- Compared to Ordinary Trailer Tie Down Rings, Our Trailer D Rings Have Larger Loads, Easier Installation, and More Suitable for Truck Bed & Trailer Floor Tie Downs Anchors.
Check Stock

Ashman Ground Screw No Dig, U-Model Screw in Post Stake - 27' Inch Long, Fits Standard 4x4 (3.5' X 3.5' Inch) Great for Mailbox Posts - 2 Pack

  • Accommodates a standard 4x4 wood post (not included).
  • Made of galvanized steel. Heavy duty ground screw..
  • With this Ground Screw set you can realize your next garden construction project easily. It’s perfectly suitable as a fundament for your new terrace or summerhouse. The ready fundament is a simple solution without concrete..
  • Hardware Included: Includes tightening rod and 6 lag bolts (use two bolts on one side and three on the other)..
  • The ground anchor is simply screwed into the ground, deep enough, if need be, so that the lawn mower can glide over it. And when the season is over, it can just as easily be screwed out again..
Check Stock

MUPATER 12 x 20 Carport Outdoor Metal Carport Tent Heavy Duty Garage Car Shelter Shade with Metal Roof Frame and Bolts for Car Truck and Boat Grey

  • 【HEAVY-DUTY OUTDOOR CARPORT】Different traditional carports with fabric cover, we upgraded this 12'x20' heavy duty carport canopy to galvanized steel roof for better enough to withstand any weather. The outdoor metal carport canopy is made of 29-gauge galvanized steel roof and 2" x 2" powder coated tube frame, which is rust-resistant, solid and sturdy. Believe that owning this outdoor carport garage shelter will be a great addition for your vehicle to against the elements..
  • 【MULTI-USE METAL CARPORT】The outdoor heavy duty carport canopy garage car shelter with enough room for you to place your vehicles, trucks and boats. The carport not only can be used as a car carport canopy, but also can be used as a activity shelter for outdoor events like parties, weddings and commercial fairs. The carport car canopy garage shelter in gray finish will be the finishing touch of your backyard. Customize your outdoor life with this carport now!.
  • 【STABLE AND SAFE CARPORT】There are 8 heavy-duty anchor bolts included for installing the outdoor carport canopy on dirt ground, asphalt or concrete to improve stability. Please note that the carport can only be used on leveled surface. The sloped roof of the carport car canopy equipped with upgraded high-density wea....
Check Stock

13lb Heavy Boat Anchor Kit Fluke Anchor with Anchor Chain and Boat Anchor Rope Set for 20 - 32 Foot Including Boat Anchors for 21 and 25 Pontoon Deck Fishing and Sail 100FT Rope

  • ALL-IN-ONE KIT: Our heavy-duty boat anchor kit is all inclusive. Set consists of one galvanized steel fluke anchor, 8 ft. of 5/16 inch galvanized....
  • IDEAL FOR 20-32 FT BOATS: Works on various seafloors comfortably as well as various lengths including small 21' and 25'. Our 13lb fluke anchor,....
  • KEEPS YOUR BOAT SECURE: Our fluke style anchors for boats are well-made with high tensile strength, outstanding stability and superior dig. The boat....
  • FRESH & SALTWATER USE: Our anchor set is ideal for both salt and fresh water. The steel fluke boat anchor and chain are galvanized steel for maximum....
  • WHY CHOOSE BETTER BOAT PRODUCTS: We are a family owned American business committed to making premium quality products and our customers happiness. We....
Check Stock

Mxeol Delta Boat Anchors 4.4 lb Galvanized with Stainless Steel Anchor Chain Shackles (Silver, 4.4lb)

  • ✔GALVANIZED STEEL: Delta boat anchors 4.4 lb plow anchor constructed from hot dipped galvanized steel.
  • ✔WELL PERFORMS: Boat anchor kit 4.4 lb is all purpose designed which holds in a variety of seabeds including mud, sand, rock, and coral.
  • ✔EASY SET RELEASE: Boat anchors 4.4 lb is with trip-line attachment for easy release and fast set with good resistance to tides and wind.
  • ✔RELIABLE DESIGN: Pontoon anchor for boat has combination of angled fluke design and weight hold boats effectively.
  • ✔SS CHAIN SHACKLES: Boat sand anchor 4.4 lb with two sizes options: 4.4lb (2kg) with 2 meters length Chain 1/4 inch & double shackles 1/4, 8lb (3.5kg) with 2 meters length Chain 1/4 inch & double shackles 1/4. 4.4lb anchor fits 12 to 16 FT boat, 8lb anchor fits 17 to 24 FT boat..
Check Stock

Sipery Expansion Bolts 304 Stainless Steel External Hex Nut Expansion Screw Bolts Sleeve Anchor M8x60mm 8Pcs

  • Specification - 8Pcs M8x60mm Expansion Bolts, M8 Thread Diameter, Total Length 2.4inch, Expansion Tube Diameter 12mm..
  • Material - Expansion Sleeve Bolts made of 304 Stainless Steel, sturdy and firm , resistant to rust and corrosion..
  • High Quality - Anchor Expansion is suitable for using indoor, outdoor even in humid environment, wear-resisting, anti-corrosion, high rust resistance..
  • Easy to Install - Expansion Bolts come with nuts and washers. Concrete anchor and masonry anchor , easy to be mounted..
  • Application - Expansion Bolts is widely used in fence, burglarproof doors and window, canopy, air conditioning rach fixation, home decoration, engineering, etc..
Check Stock

Smart Marine 13lb Fluke Anchor Kit with Anchor, 6.5 feet of Chain, 3/8' Shackles, and 98' Rode

  • 13 lb Hot Dipped Galvanized Fluke Anchor.
  • 6.5 Feet of 5/16" (8mm) chain - Hot Dipped Galvanized.
  • 2 3/8" 10mm Shackles - Hot Dipped Galvanized.
  • 98' Anchor Line - three strand - 3/8" (10mm).
Check Stock

SPARKWHIZ 1/2" D Rings for Trailers Tie Down Anchor, Heavy Duty 70 Forged Steel Bolt-on D Ring with Backer Plates for Trailer Trucks, Max 12,000 Lbs, Pack of 2 (Black)

  • PREMIUM MATERIAL: D Rings for Trailers is made of heavy duty forged steel, galvanized and power coated to prevent rust and corrosion. Its breaking strength is up to 12000LBS..
  • WIDELY APPLICATION : D Ring Tie Anchor is more convenient for your life. It is usually used as a Trailer, Truck, Pickup, Camper, Boat, Vans, Excavator, Warehouse and Workshop..
  • IDEAL CHOICE: Compared with the ordinary trailer tie down ring, our trailer D-ring has a larger load and is more suitable for the Truck Bed & Trailer Floor Tie Downs Anchors..
  • TIE DOWN RING KIT: D Ring is necessary not only in transportation, but also in daily life. When you need to safely transport motorcycles, landscaping equipment, snowmobiles, farm tools and other equipment, these large tie down anchor D-rings are your best helpers..
  • PACKAGE INCLUDES: D Ring Tie Down Anchor Kit Includes 2 Sets of D-Ring Welded to the Backing Plate, 2 Backing Plates of the Same Size, 8 Nuts Grade 10.9, 8 Bolts Grade 10.9. Any questions, please feel free to contact us..
Check Stock