Top Fusion Fiber Optic Splice Reviews

Signal fire New Model AI-9 Fusion Splicing Six Motor Core Alignment Fiber Fusion Splicer Automatic FTTH Fiber Optical Welding Splicing Machine Splicing 5S Heating15S

【Faster Splicing & Heating】- The fusion splicing machine uses a powerful high-speed motor that allows fast 5 second splice time and 15 second heat time, continuous splice and heats about 240 times. And it saving engineers time..
【3-in-1 Fiber Holder】- 3 In 1 Fiber Holder suit for SM(G. 652&G. 657)、MM (G. 651)、DS(G. 657)、NZDS (G. 655), bare fiber, pigtail, rubber-insulated, multi fiber cable.
Splice Loss: 0.025dB (SM) 、0. 01dB (MM) 0. 04dB (DS/NZDS)..
【Built-In Power Meter & VFL】- Using the latest core alignment technology with auto-focus and six motors. It is more precise and less splicing loss than cladding alignment technology. Effectively measure connection loss,verify continuity and help assess fiber link transmission quality..
【Clear LCD & Long Time Standby】- With 5-inch high-resolution screen, it is up to 300 times the focus magnifications when X/Y Axis displayed separately, 150 times focused magnifications when X/Y Axis Displayed Simultaneously. 7800 mah high-capacity lithium battery, charging time ≤ 3.5 hours, continuous splicing and heating about 240 times..
【Intelligent Interaction】- This splicing heating machine can be connected to mobile app, ten different languages can be switched lito English, French, Russia, I....

Check Stock

Fujikura FSM-70S Fusion Splicer Welding Splicer with CT-30 or CT50 Cleaver and Other Standard Accessories Multi Language

Package Accessories: FSM-70S fusion splicer Battery BTR-09 Battery Charge Cord, DCC-18 Fujikura Fiber Cleaver, CT-30 AC Adapter, ADC-18 AC Cord,....
Splices all known types of fibers. Fiber core alignment. Typical average splice loss for single mode cable with G.652D fiber is only 0.02 dB. Reduced....
Multi language, include 17 kinds language.
Reduced splicing time – 7 seconds only..

Check Stock

Optical Fiber Fusion Splice Protection Sleeve Spatula

These spatulas assist to remove fusion splice sleeves from splice protection chips.
Flat and large surface area allows the loosening of splice protection sleeves without damaging them.

Check Stock

Fiber Optic Wands (Box of 48) - Fiber Optic Wand with 3 Light Modes (White)

White Fiber Optic Wands - Bulk Box of 48 Fiber Optic Wands.
WHITE FIBER OPTICS: Elegant white glowing fiber optic strands make these fiber optic wands popular for wedding send-offs, anniversary celebrations and white dress events. These Fiber Optic Light Sticks are 13 1/2 Inches in length. This package includes 48 bright fiber optic light stick wands..
3 LIGHT MODES: Each White Fiber Optic Wand has 3 different light modes that include Steady Light Mode, Fast Flashing Mode and a Slower Flashing Mode..
BATTERIES INCLUDED: White Glowing Fiber Optic Wands each come with pre-installed batteries and are ready to go right from the package. Simply remove the battery protection tab and press the button to turn the White Fiber Optic Wand on..
USES: Fiber optic wands for Wedding Send Off, LED Sparkle Sticks, Festivals, Christmas Party Light Wands, New Years Glow Wands, Concerts, Sporting Events, Glow Party Light Sticks and Entertainment. Fantastic for Glow Party Celebrations and as light up sparkler glow wands for wedding send off..

Check Stock

Fiber Optic Jacket Stripper Coaxial Cable Stripping Cutter Tool Cable Cutter Crimper 45-163 + 45-162

ADJUSTABLE BLADES - This fiber optic buffer tube stripper has adjustable blades that you can set for any depth to ensure nick-free jacket entry into fiber optic buffer tubes.
EASY TO USE - This fiber optic stripping tool provides a comfortable and secure grip that helps make the fiber optic stripping process easy and efficient.
FIBER OPTIC STRIPPER - CATV UTP/STP Fiber optic stripper used for stripping simplex fiber and a variety of fiber optic cable. 45-162: for (0-1/8") / (0-3.2mm) Coaxial Cable, 45-163: for (1/8-7/32") / (3.2mm - 5.6mm) Coaxial Cable..
WIDELY APPLICABLE - Fiber optic tools can also be used to screen twisted pair cable, Twisted stranded cable, CATV cable, CB cable, SO, SJ, SJT and other types of flexible power cord.
UNIQUE DESIGN - 45-162 / 163 coaxial stripper is easy to carry and use. It is very suitable for family or daily use..

Check Stock

Winzwon Car Led Lights Interior 4 Pcs 48 Led Strip Light for Car with USB Port APP Control for iPhone Android Smart Phone Infinite DIY Colors Music Microphone Control

▸【10 Meters (32.81ft) Optic Fiber Band Car Ambient Lights Interior】 Sewing edge: 3.0mm. Led Power: 1W (DC 12V)..
▸【Flexible & Cuttable Optic Fiber Cable】 With 0.5mm thickness fin easily fix the fiber optic into the gag of door panel. With 1mm clip makes the fiber optic coincide with the gap of door panel, firm, not easily fall off. The optic fiber pipe can be cut for your needs..
▸【Simple Fiber Optic Installation】 Step 1: Using the scraper to fix the fiber optic into the gap of door panel. Step 2: When cutting, make sure that 12mm is fully inserted into the light source, and then cut the fin. Step 3: Fix it with a screwdriver, take care not to tighten it, otherwise it will not transmit light..
▸【Usage】 For all kinds led fiber optic illumination engine and decoration such as optical fiber hanging lamps, ar interior decoration, Artistic adornment in graphical and 3D artistic design.
Interior fiber optic light decoration of KTV, pubs, coffee houses, hotels and restaurants and so on..
▸【Safe to Use】 IP68 Waterproof, Environmental protection, low power consumption, high brightness, extremely low heat, touchable and safe for children. Package included: only 6mts optic fiber (not including the LED light sources)..

Check Stock

FTTH Fiber Optic Tool Kit 18 in 1 with Fiber Optical Power Meter and 1KMVisual Fault Locator and Cable Cutter Stripper Tool 6C Fiber Cleave Multi-Function Equipment Tool

aluminum alloy visual fault locator fiber optic cable tester meter for CATV test Universally connector for test different ST,SC,FC interfaces.
Handheld fiber optical power meter FC SC cable tester, Wavelength range: 800~1700,Power measurement range: -70~+10.
6C High Precision Fiber Cleaver is an instrument for high precision fiber cutting.It is a multi-purpose optical fiber cutter, the product uses the 16 cutting points and has a longer service life ..
FTTH fiber optic drop cable stripper is used to peel 250FTTH fiber optic drop cable stripper is used to peel 250FTTH fiber optic drop cable stripper is used to peel 250 coating of 125 fiber optic coating of fiber optic coating of fiber optic.

Check Stock

WANLUTECH OTDR Tester CCTV Tester, 1310/1550nm OTDR Fiber Optic Tester 8'' Touchscreen Built-in DMM OPM OLS VFL Event Map Support TVI CVI AHD IP CVBS Camera Test PoE/HDMI in/RJ45 Cable TDR Test

...uilt-in 8G TF card memory, can store a large amount of curve data..
✅【Network & Camera Test】WANLUTECH MT-8000 is not only an OTDR tester, but also a CCTV tester.It can measure the optical fiber length, transmission attenuation of optical fiber, attenuation of the splice, and failure location, etc. As well, built in camera tester for maintenance and installation of IP analog, HD coaxial cameras.It also comes with a digital cable tracer.Support searching for BNC cables, network cables and telephone cables from a mess of cables..

Check Stock

Fiber Cutter Stable Performance High Automatic Blade Return Lightweight Fiber Cutter (Orange)

Cutting Process: The average cutting angle of our fiber optic meat cleaver is less than 0.5 degrees, there are 16 cutting ends, the clamps have three cutting methods, 0.9mm pigtail slot, 0.25mm bare fiber slot, 2.5 to 3.0mm skin cable slot..
High Accuracy Cutter: Meanwhile, the cutter of this fiber optic cleaver is also high accuracy, stable angle, automatic cutter return, fluent and non jamming, skinned fiber optic cable cutting, no need to replace the line jig or length setter..
Thickened Rigid Slide: Our slide is made of strictly selected materials, thickened to become high and rigid, sturdy and practical, you can do term use..
Made by CNC Processing: Our fiber optic cleaver is made of aluminum alloy, tungsten steel and ABS three materials and made by CNC processing machine..
Small Error: Our fiber optic cleaver has high accuracy and small error, which can support your more detailed fiber optic work without problems..

Check Stock

Ethernet Cable Fiber Optic

The Residential Solution - Our SC APC fiber optic ethernet cable extender is the Fiber cable of choice for Fiber to the home Networks.
Compatible with - Verizon Fios, ATT internet cable, Google Fiber, Century link, UniFi Dream machine and more FTTH Fiber optic networks & hardware.
50% Thicker Jacket - Our 3mm cable is more robust than the standard network fiber optic cable which is 2mm. This SC APC Singlemode fiberoptic cable meets all UL, cUL, IEC & RoHS.
Fiber Optic Connector Included - SCAPC Adapter included with each cable for easy extension or connection from incoming PON fiber cable.
Save Money - Don’t spend $100+ on expensive single mode sc replacement cable installations when you can DIY for a fraction of the cost.

Check Stock

Fiber Cutter, Fiber Cleaver Aluminum Alloy Tungsten Steel ABS Unbreakable Portable High Accuracy for Net Installation

Small Error: Our fiber optic cleaver has high accuracy and small error, which can support your more detailed fiber optic work without problems..
Cutting Process: The average cutting angle of our fiber optic meat cleaver is less than 0.5 degrees, there are 16 cutting ends, the clamps have three cutting methods, 0.9mm pigtail slot, 0.25mm bare fiber slot, 2.5 to 3.0mm skin cable slot..
Made by CNC Processing: Our fiber optic cleaver is made of aluminum alloy, tungsten steel and ABS three materials and made by CNC processing machine..
High Accuracy Cutter: Meanwhile, the cutter of this fiber optic cleaver is also high accuracy, stable angle, automatic cutter return, fluent and non jamming, skinned fiber optic cable cutting, no need to replace the line jig or length setter..
Thickened Rigid Slide: Our slide is made of strictly selected materials, thickened to become high and rigid, sturdy and practical, you can do long term use..

Check Stock

Bangun SC/APC to SC/APC Fiber Optic Internet Cable, Armored Single Mode Patch Cable, Fiber Optic Jumper Optical Patch Cord - SIMPLEX - 9/125um - OS1/OS2 Compatible, LSZH White, 1m

Replacement fiber optic cable for ATT Fiber modem/router, Verizon Fios. This Optical Fiber cable suitables for all networks, CATV, FTTH, FTTB and FTTP systems, it is commonly used for Verizon Fios, Google Fiber and more FTTH in-home Fiber optic network optimizations and extensions. Most customers use our SC/APC to SC/APC cables for in house ONT (Optical network Terminal) relocation. They use this fiber patch cable to re-route their Fiber Optic Networks or extend their fiber internet cable..
Stronger Fiber Optic Cable with Armored: Stop struggling with patch fiber cable been chewed by your pet. This fiber jumper cable built-in a stainless steel tube inside to protect the inner core(fiber glass) from damage like pet chew. Also use protective LSZH outer jacket to strengthen the structure of cable. It retains all the features of a standard patch cord, but is much stronger. Pressure resist and Wear resist..
White Fiber Optic Internet Cable specially designed for needs of white application of home Fiber Optic Installers. White fiber patch cables can match your white equipment and white trim. We designed this white patch cables to meet customers need of decor colors. ....

Check Stock

Fiber Cleaver, Aluminum Alloy, Tungsten Steel, ABS, Stable Performance, Fiber Cutter, High, Low Error, Light Weight for Maintenance (Black)

High Accuracy Cutter: Meanwhile, the cutter of this fiber optic cleaver is also high accuracy, stable angle, automatic cutter return, fluent and non jamming, skinned fiber optic cable cutting, no need to replace the line jig or length setter..
Cutting Process: The average cutting angle of our fiber optic meat cleaver is less than 0.5 degrees, there are 16 cutting ends, the clamps have three cutting methods, 0.9mm pigtail slot, 0.25mm bare fiber slot, 2.5 to 3.0mm skin cable slot..
Made by CNC Processing: Our fiber optic cleaver is made of aluminum alloy, tungsten steel and ABS three materials and made by CNC processing machine..
Thickened Rigid Slide: Our slide is made of strictly selected materials, thickened to become high and rigid, sturdy and practical, you can do long term use..
Small Error: Our fiber optic cleaver has high accuracy and small error, which can support your more detailed fiber optic work without problems..

Check Stock