Top Fully Threaded Anchors Reviews

Concrete Sleeve Anchors 1/2 x 4 - 25 Pcs Hex Head Sleeve Anchors Concrete Bolts Hex Nut Sleeve Anchor Concrete Sleeve Anchor Hex Sleeve Anchors Zinc Plated

  • CONCRETE SLEEVE ANCHORS - Sleeve type anchors feature a split expansion sleeve over a threaded stud bolt body and integral expander, nut and washer.
  • HEAVY DUTY SLEEVE ANCHORS - Steel construction with Zinc-plated finish.
  • CONCRETE HEX SLEEVE ANCHORS - This anchor is designed for use in Concrete, Block, and Brick. Ideal for hand rails, window frames, partitions, cabinets, shelves and pipe supports.
  • SIZE: The head diameter of the anchor is 1/2". The length of the anchor is 4".
  • Package Quantity 25 Pcs Hex Nut Head Concrete Sleeve Anchors.
Check Stock

Bed Deck Rails Cleat T Slot Nuts Fits Screws with 3/8'-16 Thread 4PCS,Stainless 3/8-16 X 1 Hex Head Bolts 4PCS,Tie Down Anchors Rings Trailers Hook Cargo Bolt 4PCS for Toyota Tundra & Toyota Tacoma

  • ...ats and more.Hex Head Bolts are made from 304 Stainless Steel.tie down anchors are made of quality steel and they are fully welded triangular rings, which make the bolts sturdy and work for a very long time..
  • WIDELY USED:Mount extra custom cleats,tie downs,d-rings,bike racks and more! With a 3/8"-16 fully tapped and threaded hole, the possibilities are endless as to what you can attach.The tie down anchors are heavy duty 1000 lb rings,for securing ratchet rope, cam buckle straps, bungees cords,they are ideal to add tie down points for a truck, trailer ,SUV,boat to carry heavy loads, and let you far away from cargo swing and noise..
  • EFFECTIVELY:These T-slot nuts are perfectly compatible with bed rails in both Toyota Tundra (TM) and Toyota Tacoma (TM), but also work with a variety of other pickup trucks with compatible bed rails.By threading a screw or bolt through the 13/32" diameter bolting hole( (that's between 3/8" and 7/16")..
  • PACKAGE INCLUDES:T Slot Nuts with 3/8"-16 Thread 4 PCS,3/8-16 X 1" Hex Head Bolts 4PCS,Tie Down Anchors 4PCS.T-slot nuts are tapped all the way through allowing for the bolt to pass all the way through,simple to use and convenient to connect aluminum profiles to other parts..
  • 100% SATISFACTION:If you are not satisfied with our k....
Check Stock

Forbidden Body Jewelry 14g Surgical Steel 5mm Synthetic Stone Dermal Top Amethyst Single

  • Our Synthetic Stone dermal jewelry is made with authentic looking faux "gemstones" set in 316L Surgical Steel.
  • These dermal tops are designed to fit a 14 gauge internally threaded anchor.
  • they will also fit with any of Forbidden Body Jewelry's anchors. Choose....
  • Measurements: 14 gauge threaded bar, 5mm top diameter.
Check Stock

Xpircn 14G Titanium Dermal Anchor Tops Clear CZ Micro Dermal Piercing Jewelry 3mm Round Top 8PCS

  • High Quality Material: made of G23 Titanium,super comfortable, durable , bio-compatible and best for sensitive skin..
  • Size: The gauge of the internal thread is 1.2 mm. Compatible with 14G(1.6mm) dermal anchors base.Round crystal top size is 3mm..
  • Screw Type: internally threaded for 14 gauge(1.6mm) dermal anchors..
Check Stock

Covet Jewelry Clear CZ Centered Biohazard Symbol Internally Threaded 316L Surgical Steel Dermal Top Black/Clear

  • Clear CZ Centered Biohazard Symbol Internally Threaded 316L Surgical Steel Dermal Top.
  • Material: 316L Stainless Steel, Plating: IP, Stone Material: CZ.
  • 2.5mm CZ Prong Set Center attached to a backdrop of biohazard pattern. Internally threaded to fit perfectly into our dermal anchors..
Check Stock

Xpircn 14G Surgical Steel Dermal Anchor Top Micro Dermal Head Crystal Surface Skin Diver Piercing 1PCS

  • Material: 316L surgical steel, comfortable, durable , bio-compatible and perfect for sensitive skin..
  • Size: The gauge of the internal thread is 1.2 mm. Compatible with 14G(1.6mm) dermal anchors base. The crystal gem diameter is 5mm..
  • Jewelry Type: Internally Threaded Jewellery, Surface Jewellery, Threaded / Push Fit Accessories. Suitable for surface piercing..
  • Quantity:  1 Piece ( Top Dermal Only )..
Check Stock

KURUI #8 Self Drilling Drywall Anchors 100PCs Wall Anchors and Screws for Drywall 50 Self-Tapping/Threaded Plastic Sheetrock Anchors + 50#8 x 1-1/4 Screws 50-75LB Hanging and Mounting

  • PREMIUM NYLON MATERIALS PLUS GLASS FIBER – Made of high-quality hard nylon plastic mixed with highly robust glass fibers, these threaded self-tapping wall anchors are super hard, durable, anti-aging and wear resistant. They can hold objects with maximum weight of 50lbs and provide strong and sturdy grip into the wall. 50 premium galvanized Phillips screws ensures reliable installation and mounting..
  • PRACTICAL DESIGN FOR STABLE INSTALLATION - The threads cut deep into the material, providing a secure hold and pull-out resistant grip of the wall anchor and screw kit. The large threads are intended to hold firmly in drywall and can hold up to 50 pounds of objects..
  • EASY INSTALLATION WITH SCREWDRIVER – These threaded drywall anchors feature sharp, pointed shanks that can be screwed into the wall without a pre-drilled hole by using a screwdriver or a screw gun, which produces less dust. Once the anchor is in the wall, the screw is inserted, the anchor will wedge tightly against the drywall..
  • HEAVY DUTY & WIDE APPLICATION – The self-drilling drywall anchors are recommended for medium-duty applications and are very easy to install. They are perfect for hanging bathroom and kitchen accessories, shelving, light fixtures, mirrors, picture frames, curtai....
Check Stock

140pcs Plastic Self Drilling Drywall Anchors & Drywall Screws Kits 70 PCS White Nylon Anchors with 70 PCS M4 Screws Assortment Kit Reinforced Nylon Plastic Hollow Wall Anchors 13x42mm & 15x33mm

  • ✔High-quality plastic self drilling drywall anchors with drywall screws kit, made of premium nylon material and 304 Stainless steel (Not low quality iron screw), high-strength and durable, stable for years.
  • ✔Pre-drills precise hole in gypsum wall board - No hole preparation required, Constructed from durable plastic to last for years. Can be easily removed.
  • ✔Large-Threaded design locks into all sizes of drywall (⅜", ½",⅝") for maximum holding power.
  • ✔Package quantity: 35pcs 13*42mm Plastic Anchors and 35pcs 15*33mm Plastic Anchors with 70pcs Pan Screws..
  • ✔Wide Application: This anchors screws is special for gypsum board. Can be also used for lightweight concrete, hollow bricks, porous bricks, lime-sand bricks and other softer materials.
Check Stock

Xpircn 14G Titanium Dermal Anchor Tops Clear CZ Micro Dermal Piercing Jewelry 3mm 4mm 5mm Round Top 8PCS 4mm

  • High Quality Material: made of G23 Titanium,super comfortable, durable , bio-compatible and best for sensitive skin..
  • Size: The gauge of the internal thread is 1.2 mm. Compatible with 14G(1.6mm) dermal anchors base. Round crystal top size is 3mm, 4mm, 5mm, Please....
  • Screw Type: internally threaded for 14 gauge(1.6mm) dermal anchors..
Check Stock

Spyderco Tasman Salt 2 Lightweight Knife with 2.91\ H-1 Ultra-Corrosion Resistant Steel Blade and Yellow FRN Handle - SpyderEdge - C106SYL2

  • Superior Quality - The new Tasman 2 takes another significant step toward perfection with an improved handle design based on the best-selling Delica 4..
  • FRN Handle - It has tough, Ultra-Lightweight yellow or black fiberglass-reinforced nylon (FRN), it features improved Ergonomics, a non-slip Bi-Directional Texturing pattern, and a series of threaded stainless steel anchors..
  • Easy-to-Use Lock - The handle is also home to a stout back lock mechanism that locks the blade securely open during use. A true pocket powerhouse, the Tasman Salt 2 sets a new standard in mariner.
  • Versatile - It is available with either PlainEdge or fully serrated SpyderEdge cutting edge, the radically curved hawkbill blade of the Tasman 2 literally.
  • Durable - This dynamic generates extreme cutting power especially on fibrous hard-to-cut materials like netting, line, webbing, and rope. The Tasman Salt 2.
Check Stock

Spyderco Tasman Salt 2 Lightweight Knife with 2.91' H-1 Ultra-Corrosion-Resistant Steel Blade and Black FRN Handle - PlainEdge - C106PBK2

  • Superior Quality - The Tasman Salt 2 is a powerful fusion of a hawkbill blade profile, ultra-corrosion-resistant H-1 blade steel, and an enhanced, injection-molded handle design..
  • FRN Handle - It has tough, Ultra-Lightweight yellow or black fiberglass-reinforced nylon (FRN), it features improved Ergonomics, a non-slip Bi-Directional Texturing pattern, and a series of threaded stainless steel anchors..
  • Easy-to-Use Lock - The handle is also home to a stout back lock mechanism that locks the blade securely open during use. A true pocket powerhouse, the Tasman Salt 2 sets a new standard in mariner.
  • Versatile - It is available with either PlainEdge or fully serrated SpyderEdge cutting edge, the radically curved hawkbill blade of the Tasman 2 literally.
  • Durable - This dynamic generates extreme cutting power especially on fibrous hard-to-cut materials like netting, line, webbing, and rope. The Tasman Salt 2.
Check Stock

SNUG Fasteners (SNG325) Ten (10) 3/8-16 x 1-1/4\ Long Carriage Bolts Set w/Nuts & Washers, Count

  • A Hexagon Bolt is a threaded fastener with a hexagonal head shape, and are designed to be installed using a spanner. Hexagon bolts are favoured for their robust shape, which makes them suitable for more heavy-duty fastening applications. Hexagon bolts are also generally available in larger sizes than alternative fasteners..
  • As their name suggests, Full Thread Hexagon Bolts are fully threaded. This type of bolt is required when the shaft of a fastener is being inserted completely into a threaded hole. Fully Threaded Bolts are often used to securely fasten two threaded sections together..
  • Made from 18-8 stainless steel, FullerkregⓇ brand screws have good chemical resistance and may be mildly magnetic. Length is measured from under the head..
  • Screws that meet ASME specifications comply with these dimensional standards.DIMENSIONS: Diameter: 1/4" | Length: 2-1/2" | Thread Type: 20 tpi Coarse Thread (Standard).
  • Package includes ten each of bolts, hex nuts , Flat & Lock washers.
Check Stock

The Hillman Group 260288 1 1 1 1/2 x 8-Inch Anchor Bolt, 50-Pack

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock