Top Fuel Tank Pressure Reviews

NOENOUGH External Fuel Pump 300LPH High Flow 12V 145psi Fuel Injection Pump Replacement 0580254044 Universal Fit for AN10 Inlet / AN6 Outlet

  • ★【COMPATIBLE FUEL: 】Inline Fuel Pump Inlet AN10, Outlet AN 6, Pump Flow and Test Information: Flow Rate: 200 LPH(53 GPH) under 75PSI(5.0 Bar) & 12V. Flow rate:255 LPH(68 GPH) under 43 PSI(3.0 bar) &12V. Flow rate:300 LPH(80 GPH) under 43 PSI(3.0 bar) &13.5V. Operating Voltage:12V. Operating Pressure:75PSI(5.0Bar). Operating temperature range: -68 °F-194 °F.
  • ★【EASY TO INSTALL: 】It is recommended to install below the tank ensures that fuel is gravity-fed from the fuel tank. If the pump is higher than the fuel tank, it is forbidden to flow to the pump and force the fuel to be scratched. If the pump is higher than your fuel tank, prohibit fuel flow to the pump and force fuel to enter the pump..
  • ★【PACKAGE INCLUDE: 】1 x External Fuel Pump, 2 x Rubber Connection Cover, 2 x Terminal, 1 x Large Gasket, 1 x Small Gasket, 1 x Large Nut, 1 x Small Nut.
  • ★【COMPATIBLE FUEL: 】Gasoline, pump gas, race gas, diesel, (Alcohol fuels or E85 can be used, but pump life will be diminished). This Inline High Pressure Fuel Pump is adopts the anodized surface process, which is not easy to fade and has rust proof, scratch proof and waterproof..
Check Stock

Compressed Air Filter Regulator Combo, Excellent Filtering Performance Water Oil Trap Separator Aluminum Alloy High Hardness for Compressed Air Lines

  • The container cup is made of high quality materials, high temperature resistance and high hardness..
  • It can prevent pollutants from being mixed into the fuel tank with the air due to the fluctuation of the fuel volume of the fuel tank..
  • With a pressure gauge, the pressure value can be accurately displayed for easy observation..
  • The container cup of this pressure regulating filter has good sealing performance..
  • Pull up the pressure regulating valve to unlock it, and adjust the air pressure independently..
Check Stock

Carter Universal Electrical Fuel Pump Automotive Replacement 12V (P4600HP)

  • SIMPLE AND QUICK INSTALLATION: All necessary hardware is provided so you can have a hassle free automotive replacement installation. Instructions also included for a step by step wiring guide..
  • TOUGH TURBINE TECHNOLOGY: Inspired military strength and performance, this fuel pump provides improved and QUIET fuel flow for adequate pressure and lowers current strain to meet specific engine requirement..
  • FRESHER FUEL: Made with a multi-layer filtration technology, this electric pump provides 40% more dirt holding capacity, keeping your pump and engine safe from impurities and providing increased pump longevity..
  • WHAT'S INCLUDED:For a proper installation, Carter electrical in tank fuel pump comes with the following components: fuel pump, strainer, wire harnesses, tank seal, and grommets..
  • INCREASED FUEL EFFICIENCY: Carter electric fuel pump provides accurate fuel needs while adjusting to your vehicle pressure accordingly. Feel safer on the road while receiving your vehicle's maximum power potential..
Check Stock

Carter In-Tank Universal Electric Fuel Pump Automotive Replacement 12V (P4389)

  • SIMPLE AND QUICK INSTALLATION: All necessary hardware is provided so you can have a hassle free automotive replacement installation. Instructions also included for a step by step wiring guide..
  • TOUGH TURBINE TECHNOLOGY: Inspired military strength and performance, this fuel pump provides improved and QUIET fuel flow for adequate pressure and lowers current strain to meet specific engine requirement..
  • FRESHER FUEL: Made with a multi-layer filtration technology, this electric pump provides 40% more dirt holding capacity, keeping your pump and engine safe from impurities and providing increased pump longevity..
  • WHAT'S INCLUDED:For a proper installation, Carter electrical in tank fuel pump comes with the following components: fuel pump, strainer, wire harnesses, tank seal, and grommets..
  • INCREASED FUEL EFFICIENCY: Carter electric fuel pump provides accurate fuel needs while adjusting to your vehicle pressure accordingly. Feel safer on the road while receiving your vehicle's maximum power potential..
Check Stock

PPE Race Fuel Valve for 2004.5-2010 Duramax LLY/LBZ/LMM 113073000 with PPE Viton O-Ring Upgrade for PPE Race Fuel Valve

  • The PPE Race Fuel Valve (heat treated stainless steel construction) replaces stock or a shimmed pressure relief valve..
  • This valve helps maintain fuel rail pressure during high engine load conditions by completely blocking the pressure relief port (effectively eliminating fuel return to the fuel tank). It eliminates potential low fuel rail pressure DTC codes P1093 or P0087 (low fuel rail pressure during power enrichment) that are caused by insufficient PRV spring pressure..
  • Kit Includes PPE Viton O-Ring 1137073001.
Check Stock

ZJERYL GULL TU-114 Auto Fuel Pressure Gauge Tester Kit Gasoline Pressure MetersAutomobile Instrument Testing Tool(Red)

  • 1: Universal design with the accompanying adapter. hoses and adaptationtings cover all fuel injection systems and most cars and vehicles. Not for diesel high pressure injection pumps or direct injection engines.
  • 2: Mechanical ideal: fuel injection pump pressure / fuel injection pressure gauge testing, main sealing performance / accurate reading.
  • Fuel Pressure Tester (0-140 PSI) with good sealing performance and quality materials (metal、rubber、plastic.) provides you with an accurate reading and long lasting product..
  • 3: 114 Fuel Pressure Gauge Tool Kit connection.
  • Connect the pressure gauge directly to the standard schrader / M6 / M8 / M10 / M12 / M14 fuel pressure test port of the fuel pump using special parts and hoses. Insert the "T" part in series between the pump and engine..
  • 4：This fuel injection pump detector is a professional fuel injection system compression detection tool, these readings will help to diagnose the inlet / outlet side components have kink / leak / jam detection or fuel pressure regulator, tank pressure is low. Gasoline is flammable. Make sure there is no open flame nearby and it is operated by a professional..
  • 100% Satisfaction: We are responsible for every product. If you have any problems with our products or services, ple....
Check Stock

Locking Pre-vent Cap for Auxilary and Transfer tanks

  • THIS ITEM HAS BEEN REPLACeD BY THE NEW AND IMPROVED FSS 754.
  • The Flow Security Systems PRE-VENT Fuel Cap represents the latest in fuel cap technoloy. The FSS 750 pre-vent cap is designed to permit the controlled release of fuel tank pressure from volatile fuels. When removing the cap to refuel a 1/2 turn of the cap releases the fuel tank pressure before the caps sealing gasket is released from the filler neck. This feature dramatically reduces the possibility of fuel expulsion from the filler neck when the cap is removed. The FSS 750 pre-vent security cap is for use on diesel, transfer and auxilary tanks. Allows pumping of fuel at 15 gpm without removal of cap. The FSS 750 pre-vent security cap helps to maintain fuel quality by reducing condensation and evaporation loss..
  • Patented Spinsecure design prevents unauthorized access to fuel, Suitable for use on all tranfer tanks.
  • For use on all 2” female threaded tanks, Tubular lock and key with over 50,000 combinations.
  • Can be keyed alike for multiple use convenience, Has weather proof self-closing latch covering the face of the lock.
Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-140PSI, Universal for Auto Truck SUV Motorcycle ATV RV

  • FITMENT TYPE FOR JIFETOR FUEL PRESSURE GAUGE KIT: The car fuel pressure tester kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or direct-injection engine, due to the fuel gauge's low pressure range. Testing fuel pressure is an essential part of the troubleshooting process of fuel injection system..
  • CONNECTIONS FOR TU-114 FUEL PRESSURE GAUGE TOOL KIT: The fuel pressure test gauge set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard schrader valve on fuel pump, 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee help to splice in-line between the fuel pump and engine for most vehicles..
  • FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 3-1/2" large dial with 0-140psi/0-10bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. The pressure relief valve and 16"L fuel drain hose help to re....
Check Stock

Standard Motor Products 588A Carburetor Kit

  • 【COMPATIBLE VEHICLES NOTE】★★★Buy it with your confidence! ★★please check the description or use the year/make/model drop down bar and interchangeable part numbers to confirm the compatibility before purchase our This Fuel Tank Pressure Sensor..
  • 【QUALITY & FEATURES】★★Fuel tank sensor housing is made from high quality reinforced plastic, offering superior resistance to the elements. ★★★ a robust design with high grade materials to meet the stringent demands of today's service professional to insure it lasts longer..
  • 【EASY INSTALLATION】★★★All tank pressure sensor are 100% tested using automated equipment, even under the most demanding operating conditions.★simple structure, easy to install, plug and play, very convenient.★★★ Only 15 mins less for installation. solve engine code problem and no engine light on. It was as advertised. Installed and corrected the issue at less than half the dealers cost. check youtube video if you have installation problem.Quick installation (professional help may be required).
  • 【REPLACES PART & MODEL】Commonly found on popular Compatible with Chevy, Buick, Saturn, GMC Cadillac, Oldsmobile, Pontiac, Hummer models including years 1996-2011, and more. See below for detailed mod....
Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-100PSI, Universal for Auto Truck SUV Motorcycle ATV RV

  • FITMENT TYPE FOR JIFETOR FUEL INJECTION GAUGE: The car fuel pressure diagnostic test kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or high pressure fuel track on direct-injection engine, due to the fuel gauge's low pressure range. Test fuel pressure is an essential part of the troubleshooting process of fuel injection system..
  • 3 CONNECTION TYPES FOR TU-113 FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 14"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 11"L hose for the small Schrader valve (for some Ford), and 8"L hose for M6 fuel pressure test port. 1/4" barbed brass fittings is direct for special test outlet on engine, and aluminum tee splices in-line between the fuel pump and engine for most vehicles..
  • PRIMARY FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 2-3/4" large dial with 0-100psi/0-7bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. Pleas....
Check Stock

PPE 50-STAGE LEGAL Replacement Fuel Valve 113073000 & Viton O-Ring 113073001 Compatible with 2004.5-2010 GM 6.6 LLY/LBZ/LMM Duramax & 2007.5-2018 Ram 6.7 Diesel

  • California Air Resources Board Executive Order Number: D-701-12.
  • The PPE Replacement Fuel Valve (heat-treated stainless steel) replaces stock or a shimmed pressure relief valve. This valve helps maintain fuel rail pressure during high engine load conditions. It eliminates potential low fuel rail pressure DTC codes P1093 or P0087 (low fuel rail pressure during power enrichment) that are caused by insufficient pressure relief valve spring pressure opening, returning fuel to the fuel tank..
  • Fitment: 2004.5-2010 GM 6.6L Duramax Diesel | 2007.5-2018 Dodge Ram 6.7L Diesel.
Check Stock

DEF Fuel Injector Common Rail Fuel Plug-1050070 for 2003-2007 Ram 2500 3500 5.9L

  • Fitment:2003-2007 Ram 2500 3500 and 5.9L Cum-mins..
  • Material:Made of Stainless Steel to avoid cracking and excessive heat.Effective anti-oxidation,anti-rust,anti-corrosion..
  • Usage:Replace the factory banjo bolt mounted on the top side of the pressure relief valve..
  • Features:Maintain fuel rail pressure during high engine load conditions.Prevent high-pressure fuel from being returned to the fuel tank.Eliminate....
  • Benefits:Weld-free construction that give fuel valve better leakproofness.Capped off completely pressure relief valve increase security..
Check Stock

A ABIGAIL GSS342 255 LPH High Flow Electric Intank Fuel Pump with Installation Kit

  • This fuel pump comes with 30 Days HASSLE-FREE RETURN & 1 Year / 12 months unlimited replacement promise..
  • The purpose of a fuel pump is to convey the required quantity of fuel from the tank to the engine at the necessary pressure..
  • While this is not a genuine OE part it is a direct replacement for the factory fuel pump sending unit & fuel pump assembly..
  • Includes Fuel Pump, Sending Unit, Float, Fuel Reservoir, Fuel Strainer, Wire harness and Tank Seal.
  • Please Check fitment for your vehicle Year/Make/Model on compatibility dropdown / chart. No modification necessary. Images depict actual item and....
Check Stock