Top Fuel Pump 3 Reviews

Universal Electric Fuel Pump Kit 12v 3-6 PSI Low Pressure with Fuel Filters 10 Hose Clamps 6.56 FT 5/16" ID Fuel Line Replacement For Carburetor Lawn Mower Gas Diesel Fuel Transfer Pump

  • This is a 12V fuel pump with fuel filter kits, universal for gasoline and diesel (exclude alcohol) engine, fit for all 12 volt cars, trucks, carburetor, lawn mower, boats & generators.
  • Inline Fuel Pump Kit Includes: 3-6 PSI Electric Fuel Pump, 1PC Socket Wire, 1Pc Fuel Filters, 2 Meter/6.56-Foot 5/16" ID Fuel Line, 10Pcs Hose Clamp.
  • Low Pressure Fuel Pump: Voltage: 12 Volt, Output Pressure: 3-6 PSI, Flow Reaches: 70 L/H, Hose Size: 8 mm ( 5/16 inch ), Material: Copper Clad Aluminum, Plunger-type of fuel supply.
  • Upgrade check valve provides optimum traffic, reducing the noise of the pump so we can operate quietly.
  • Upgraded Fuel Filter: Upgraded Filter Paper The number of pleats of the filter paper is dense, and it sticks firmly to the shell without gaps.
  • It can filter out impurities, dirt and fuel particles to prevent clogging of the carburetor, only allow clean fuel to flow in and keep the engine charged.
  • 3-Layer Thickened Fuel Line: Length: 6.56 feet(2m), Thickness: 2.99mm.
Check Stock

The ROP Shop | VRO Conversion Fuel Pump for Johnson, Evinrude, OMC, BRP 5004558, 0438400 Engine

  • The ROP Shop replacement VRO Conversion Fuel Pump for Johnson, Evinrude, OMC, BRP 5004558, 0438400 Engine.
  • Specs - Refer to images 2 & 3 for more information.
  • Includes - (1) Vertical Ratio Oil Injection Conversion Fuel Pump.
  • Fits: V4 & V6 Crossflow and Looper outboard engines with 90° angle cylinder block. Does not fit 60° or 3 cylinder applications. Crossflow engines have shaped piston tops, Looper engines have flat top pistons. The 90° motor will have a more triangular profile, while the 60° motor is more rounded.
  • This is a Pre-Mix VRO Conversion Fuel Pump Kit. It replaces the original VRO fuel pump and now mixes the fuel and oil in the fuel tank instead.
Check Stock

NEW HOLLEY 110 GPH BLUE ELECTRIC FUEL PUMP WITHOUT REGULATOR,STREET & STRIP CARBURETED APPLICATION,COMPATIBLE WITH GASOLINE ONLY,12 VOLT

  • Brand New Holley 110 GPH Blue Electric Pump without Regulator, Street/Strip Carbureted Applications, Compatible with Gasoline Only (Part #12-812-1).
  • Features: Tumble polished billet look | Lower housing casting designed for enhanced fuel flow | Motor draws only 3 amps current | 7 1/2 amp fuse recommended | Improved design for street/strip applications | Not designed to be used on aircraft of any type | Distinctive Blue logo | Flows 110 GPH (free flow) | Flows 88 GPH at 9 PSI | Maximum pressure is 14 PSI | Provides constant fuel flow with no pulsation.
  • Has externally accessible pressure relief valve (max 14 PSI) | Rotor/vane pump design is more tolerant of contaminated fuels | Weighs only 3 lbs | Includes mounting bracket | Repair kits are readily available | Can be serviced from the pump end | Not compatible with alcohol or methanol fuels | Use of safety shut-off switch, P/N 12-810, strongly recommended | Not designed or recommended for use with fuel injection systems | Fuel pressure regulator not included.
  • Specs: Application: Universal | Bracket Color: Silver | Brand: Holley | Emission Code: 5 | Free Flow GPH: 110 | Free F....
Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-100PSI, Universal for Auto Truck SUV Motorcycle ATV RV

  • FITMENT TYPE FOR JIFETOR FUEL INJECTION GAUGE: The car fuel pressure diagnostic test kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or high pressure fuel track on direct-injection engine, due to the fuel gauge's low pressure range. Test fuel pressure is an essential part of the troubleshooting process of fuel injection system..
  • 3 CONNECTION TYPES FOR TU-113 FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 14"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 11"L hose for the small Schrader valve (for some Ford), and 8"L hose for M6 fuel pressure test port. 1/4" barbed brass fittings is direct for special test outlet on engine, and aluminum tee splices in-line between the fuel pump and engine for most vehicles..
  • PRIMARY FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 2-3/4" large dial with 0-100psi/0-7bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. Pleas....
Check Stock

The ROP Shop | VRO Conversion Fuel Pump for 1991 Evinrude, Johnson 120 HP J120TXEIE, J120TLAIE

  • The ROP Shop replacement VRO Conversion Fuel Pump for 1991 Evinrude, Johnson 120 HP J120TXEIE, J120TLAIE.
  • Specs - Refer to images 2 & 3 for more information.
  • Includes - (1) Vertical Ratio Oil Injection Conversion Fuel Pump.
  • Fits: V4 & V6 Crossflow and Looper outboard engines with 90° angle cylinder block. Does not fit 60° or 3 cylinder applications. Crossflow engines have shaped piston tops, Looper engines have flat top pistons. The 90° motor will have a more triangular profile, while the 60° motor is more rounded.
  • This is a Pre-Mix VRO Conversion Fuel Pump Kit. It replaces the original VRO fuel pump and now mixes the fuel and oil in the fuel tank instead.
Check Stock

Fuel Pump Removal Tool, Fuel Pump Module Spanner Wrench 3/8' to 1/2' Universal Fuel Pump Lock Ring Tool, Adjustable Fuel Pump Lid Tank Cover Wrench

  • MADE OF HIGHT QUALITY STEEL:Fuel tank cover spanner adopts high quality steel forging, overall high temperature quenching treatment, high hardness, wear resistance, long life, easy to use..
  • APPLICATION: Fuel pump cover spanner is used for vehicle removal and installation of fuel pump retaining rings that attach the fuel pump module to the fuel tank. Fuel pump module spanner wrench fits most plastic retaining rings. Compatible with vehicles equipped with silent fuel tank lids..
  • GENERAL MODELS: Suitable for Mercedes-benz, for BMW,for Audi,for Volkswagen,for Toyota,for Honda,for Nissan,for Citroen and other vehicles with plastic fuel pump lock ring..
  • ADJUSTABLE: The fuel pump lid tank cover wrench fits different fuel tank lids and can be adjusted from 3/8" to 1/2" (38mm to 168mm) ratchet drive..
  • DESIGN FEATURES: The curved foot design is more suitable for the installation surface of the oil pump cover to ensure that it is not easy to slip off during operation. The four sides are rounded, and the two hands are respectively held at both ends of the beam to twist the remover, so that it is not easy to hurt the hands when operating with both hands..
Check Stock

NEW MSD HIGH PRESSURE ELECTRIC FUEL PUMP,45 GPH AT 60 PSI.375" HOSE NIPPLE INLET & OUTLET

  • Brand New MSD High Pressure Electric Fuel Pump, 45 GPH at 60 PSI, .375" Hose Nipple Inlet & Outlet (Part #2225)..
  • This high pressure and high flow Fuel Pump features a roller vane pump mechanism which is extremely resistant to clogging & jamming. The pump mounts in-line (out of the fuel tank) with two supplied cushioned clamps for a quick and sturdy installation. The wire terminals feature brass studs for secure connections. Ideal for use as a "booster" for nitrous oxide applications, or as a stand alone pump for multi-port EFI systems on engines up to approximately 525 HP. Capable of 45 GPH at 60 PSI..
  • NOTE: Compatible for Lеаded and Unlеаded Fuel Only.
  • Features: 45 GPH at 60 PSI | 3/8" Hose nipple inlet & outlet.
  • Specs: Brand: MSD | Current Draw: 12 Amps at 14 Volts | [email protected]: 45 | Inlet & Outlet Size: 3/8 in. Nipple Fitting | Product Type: Fuel Pump.
Check Stock

NEW HOLLEY 97 GPH RED ELECTRIC FUEL PUMP WITH BRACKET,STREET & STRIP CARBURETED APPLICATION,COMPATIBLE WITH GASOLINE ONLY

  • Brand New Holley 97 GPH Red Electric Fuel Pump (Part #12-801-1).
  • Features: Tumble polished billet look | Lower housing casting designed for enhanced fuel flow | Maximum pressure is 7 PSI | Motor draws 2 amps current | Relay kit P/N 12-753 & 7 1/2 amp fuse recommended | Constant fuel flow with no pulsation | Improved design for street/strip applications | Not designed to be used on aircraft of any type | Distinctive Red logo | Flows 97 GPH (free flow) | Flows 71 GPH at 4 PSI | Regulator is not required.
  • Has externally accessible pressure relief valve (max 7 PSI) | Rotor/vane pump design is more tolerant of contaminated fuels | Weighs only 2.88 lbs | Not designed or recommended for use with fuel injection systems | Includes mounting bracket | Repair kits are readily available | Can be serviced from the pump end | Not compatible with alcohol or methanol fuels | Use of safety shut-off switch, P/N 12-810, strongly recommended.
  • Specs: Application: Universal | Bracket Color: Silver | Brand: Holley | Emission Code: 5 | Free Flow GPH: 97 | Free Flow LPH: 367 | Fuel System: Carbureted | Fuel Type: Gasoline | Inlet Size: 3/8″ NPT | Material: Aluminum | Motor Finish: Silver | Outlet Size: 3/8″ NPT | Product Type: Fuel Pump | Pump Body Color: Silver.
Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-140PSI, Universal for Auto Truck SUV Motorcycle ATV RV

  • FITMENT TYPE FOR JIFETOR FUEL PRESSURE GAUGE KIT: The car fuel pressure tester kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or direct-injection engine, due to the fuel gauge's low pressure range. Testing fuel pressure is an essential part of the troubleshooting process of fuel injection system..
  • CONNECTIONS FOR TU-114 FUEL PRESSURE GAUGE TOOL KIT: The fuel pressure test gauge set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard schrader valve on fuel pump, 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee help to splice in-line between the fuel pump and engine for most vehicles..
  • FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 3-1/2" large dial with 0-140psi/0-10bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. The pressure relief valve and 16"L fuel drain hose help to re....
Check Stock

LPHUMEX Fuel Pump Removal Tool - Fuel Pump Lock Ring Tool, Fuel Tank Repair Kit, Fuel Tank Lid Cover Remove Spanner, 3/8' to 1/2' Adjustable Lock Ring Spanner

  • Universal: This Fuel Pump Module Spanner Wrench fits most plastic retaining rings, Compatible with all vehicles that have silent fuel tank lid, adjustable from 3/8" to 1/2" (38mm to 168mm) ratchet drives..
  • Applications: Suitable for vehicles to remove and install the fuel pump retaining ring that holds the fuel pump module on the gas tank..
  • Easy Handle: Anyone who needs to remove a ring nut to change out or install a fuel pump, replace fuel sending unit, change the fuel filter etc. MUST have this wrench!! Gets the job done quickly!! Zero damage to the plastic ring nut with this wrench and it's totally adjustable to fit whatever size ring nut possible!!.
  • Work with: All that is needed is a 12mm wrench to set the width of the arms and a 3/8" drive ratchet with extension. Perfect though. Way better then a screw driver and hammer (that didn't work).Make sure you tighten the two small bolts before use. The wrench easily engages in the ridges around a threaded locking collar that secures the fuel pump to the top of the tank..
  • You can use on all kind of vehicle with slient fuel tank lid..
Check Stock

Frienda 3 Pieces Universal Fuel Pump Removal Tools Adjustable Fuel Pump Lock Ring Adjustable Lock Ring Spanner Fuel Pump Module Spanner Wrench Fuel Tank Lid Cover Remove Spanner

  • Durable texture: our fuel pump removal tools are made of quality chrome-vanadium steel material, sturdy and durable, not easy to corrode, rust, deform and break, can serve you for a long time.
  • Proper dimension: the adjustable lock ring spanner with two claws are adjustable from 3/8 inch to 1/2 inch (38mm to 168mm) ratchet drives, the fuel pump module spanner with three claws is adjustable from 135mm to 185mm, enough to meet your daily need.
  • Humanized design: these oil pump cap cover has large adjustment range which is suitable for different oil pump caps, will meet your different need and effectively help tackle the job of replacing the fuel sender fast and effective without damaging the oil pump rings.
  • Nice repair tool: the curved foot design makes fuel tank lid cover remover spanners more suitable for the oil pump cover mounting surface to ensure that it is not easy to slip during operation, save your time and effort.
  • Fit most situation: these adjustable fuel pump lock ring tool are suitable for vehicles to remove and install the fuel pump retaining ring that holds the fuel pump module on the gas tank, suitable for most car tank caps.
Check Stock

CarBole Gasoline Pump Electric Fuel Pump Universal 5/16 Inch Inlet and Outlet Inline 12V 1-2A 28GPH 2-3.5P.S.I. Operating Fuel Pressure Self-Priming

  • Fuel transfer pump running on 12V, fuel pressure 2 to 3.5 PSI, Flow rate 28 GPH, Inlet and outlet size 5/16″(0.315 inch)..
  • Fuel pump connect with 2 bolt fitting, 2 wires design. Stronger suction to ensure the fuel feeding of the car more stable..
  • 12V universal fuel pump fits for Cars, Trucks, Boats & Generators and purchased by confidence within 12 months warranty..
  • Perfectly suitable for Toyota, Ford, Honda, Mazda, and any other suitable car.
  • Fuel Pump for Gasoline, Not Fit for: E85 standard or for Ethanol, Diesel, Methanol and Race Fuel, Water and watery liquid. DO NOT USE PUMP WITHOUT A FILTER..
Check Stock

essie ISE Kawasaki Fuel Filter 49019-7001

  • Fuel filter for 49019-7001 49019-7005 49019-0707 49019-0014.
  • Fuel Pump for Kohler 24 393 04-S, 24 393 16-S.
  • for John Deree LG808656, M138498, M145667.
  • For Kawasaki FH381V FH430V FH451V FH500V FH531V FH541V FH580V FH601D FH601V FH641D FH641V FH661V FH680D FH680V FH721D FH721V FH381V FH770D FD731V FX730V FX751V FX801V FX850V.
  • Size: 86mm x 82mm x 30mm/3.39inch x 3.23inch x 1.18inch(L*W*T) Hole Distance: 70mm/2.76inch.
Check Stock