Top Fuel Line Clamps Engine Reviews

Zemoner 3/8 6 Ft Fuel Line with Hand Bulb Primer Pump & 10 Pcs Hose Clamps for Boat Marine Outboard Gas Diesel Petrol

  • ▶ Worry-free combination ◀ The Package includes 6 Feet ID 3/8 " Fuel Line.
  • 2 Pcs Hand Bulb Primer. The dimensions of the three....
  • ▶ High-quality Materials ◀ Wall thickness is 3.5mm. The material is woven fiber nylon rubber, which is resistant to high temperature, high....
  • ▶ Extra Bulb Pump ◀ In the high temperature, the pump Primer is not durable enough, usually replace it every year. We have equipped an extra pump....
  • ▶ Hose Clamps ◀ Made of 304 Stainless Steel. Clamps are sturdy, strong and reliable. When connecting the fuel tank and the engine connecting these....
  • ▶ Wide Application ◀ suitable for fuel systems for automobiles, ships, helicopters, ships, motorcycles, etc..
Check Stock

Five Oceans 3/8 Marine Fuel Line Yamaha Mercury Outboard Fuel Line Boat Fuel Line Hose EPA/CARB Replaces 22-13563A3 22-13563Q3 22-14213M 2214213Q 22-13563Q7 22-13563A7 22-13563A6 22-13563T7

  • COMPATIBILITY: Fuel line hose connector, female, with 3/8 Inch hose barb for use on Force 40 hp & larger (1993 & newer), 9.9/15/25 hp (1998), and all Mercury/Mariner outboards using clip-on type disconnect at engine end & 3/8 Inch I.D. fuel line. All Yamaha/Mercury Outboards and Mercury Fuel Tank Side - 1 End Replaces Original Mercury (OE) Part #: 22-13563A3, 22-13563Q3, 22-14213M, 2214213Q and 1 End Replaces Original Mercury (OE) Part #: 22-13563Q7, 22-13563A7, 22-13563A6, 22-13563T7.
  • PACKAGE INCLUDES: Fuel Line Assembly 3/8 Inch Hose 6 Feet Long, a Premium Primer Bulb, 2 Mercury Female Quick Connectors, and 2 Stainless Steel Hose Clamps.
  • MULTI-LAYER: Low-permeation Primer Bulb 3/8 Inch Hose that provides reliable and efficient priming to help start your boat engine.
  • FUEL COMPATIBILITY: Primarily used for fuel feed. Compatible with gasoline up to 85% ethanol-blended fuels, diesel, and all bio-diesel blends.
  • DURABLE MATERIAL: Engineered and designed with marine-grade material. This Fuel line is weather and UV Resistant. Meets USCG type B1-15 SAE J1527 and ABYC Accepted Standards. Reinforce Hose Approved by Environmental Protection Agency EPA and CARB regulations.
Check Stock

Taiss ID Fuel Line Kit, 1/4\ (6mm), 6FT(2m) Fuel Line Hose + 10PCS 2/5\ (11mm) ID Hose Clamps. Suitable For Small Engines: Tractors, Mowing Machine, Snow Machine, Etc.

  • Compatible with ethanol blended fuels, Engineered low permeation material prevents fuel evaporation..
  • INCLUDE - The marine fuel line assembly includes a premium quality rubber bulb(a free primer bulb for you)and 6ft 3/8in fuel hose, 360°stainless steel hose clamps..
  • FITMENT - This is universal fuel line and as such do not come with engine or tank fittings,Suitable for Boats, RVs, Tractors, and Caravans..
  • FUNCTION - Keep your fuel line operating at peak performance with our BARTOO fuel line assembly,and ensure your outboard motor runs smoothly..
  • NOTICE - This is rubber product, please do not store this item under direct sunlight or other rough environment..
Check Stock

Harbot Carburetor for Harbor Freight Chicago Predator 69675 69676 69728 69729 212CC R210III 3200 4000 Watts Gasoline Generator

  • Fit for Harbor Freight Chicago Electric Branded Predator 3200/4000 Watts Gasoline Generator Powered by a 212CC 6.5HP Engine.
  • Fits Part Number: 69675, 69676, 69728 & 69729.
  • Package include 1 carburetor, 3 gasket, 1 fuel filter, 1 fuel line, 2 clamps,1 fuel shutoff valve.
Check Stock

TOPEMAI 796587 Carburetor Compatible with Briggs & Stratton 594601 796109 591731 594593 591736 590400 796078 Engine Carb

  • Carburetor compatible with Briggs & Stratton 796587 591736 594601 794136 796109 594593 593433 591731 590400 796078.For 19HP Intek Single Cylinder OHV Motor Nikki Carb,19.5 HP Engine Craftsman Riding Mower Lawn Tractor..
  • 796587 Carburetor AKA 594601 Carburetor,594601 Carburetor Kit,Carb 594601,794136 Carburetor,591736 Carburetor,590400 Carburetor,796109 Carburetor,591731 Carburetor,594593 Carburetor,594593 Rebuild Kit,594593 Carb,796587 Carburetor Kit..
  • 796587 591736 594601 Carburetor is compatible with many Briggs and Stratton machine models,please refer to the product description for details..
  • This genuine replacement carburetor assembly is designed to work with Briggs and Stratton engines. Carburetor supplies a combustible mixture of gas and air to the engine. It also helps to control its speed..
  • 796587 Carburetor Kit comes with 1 oil filter,1 fuel filter,1 fuel line,1 fuel shut off valve,1 gasket,2 clamps. Please check the pictures carefully before you buy it..
Check Stock

Harbot Carburetor for Harbor Freight Chicago Predator 68527 68528 67560 67561 208CC 212CC R210III 3500 3050 3200 4000 Watts Gasoline Generator

  • Fit for Harbor Freight Chicago Electric Branded Predator 3500/3050/3200/4000 Watts Gasoline Generator Powered by a 208CC/212CC 6.5HP/7HP Engine.
  • Package include 1 carburetor, 3 gasket, 1 fuel filter, 1 fuel line, 2 clamps,1 fuel shutoff valve.
Check Stock

Leadrise Universal Electric Fuel Pump Kit 12V (2.5-4psi) Electric Fuel Pump, 2 Meter/6.56-Foot 5/16' ID Fuel Line, Fuel Filters and 10Pcs Hose Clamp

  • ★【Universal Electric Fuel Pump Kit 12V:】 Inline Fuel Pump Kit includes all the component you need: 2.5-4psi Electric Fuel Pump, 2 Meter/6.56-Foot 5/16″ ID Fuel Line, 1Pcs Fuel Filters and 10Pcs Hose Clamp. Fuel filters and hose clamps are required for the use of fuel line, with which can be used perfectly with the electric fuel pump..
  • ★【Electric Fuel Pump】Material: Copper Clad Aluminum, Inline Fuel Pump, Output Pressure : 2.5-4 psi, Voltage : 12 Volt, Flow Rate : 30 GPH, Hose Size : 8 mm ( 5/16 inch ).
  • ★【3-Layer Thickened Fuel Line】The fuel pipeline is made of 3 layers: inner pipe, outer pipe and additional reinforcement layer. It is resistant to oil, cold, and ethanol. The inner and outer tubes are made of rubber and the middle reinforcing layer is braided fiber nylon thread. The wall thickness is 3.2mm. The 6.5ft/2m hose can be cut to size for all your applications..
  • ★【Fuel Filter】It can filter impurities, dirt, and fuel particles to prevent clogging of the carburetor and only allow clean fuel to flow in and keep the engine charged..
  • ★【Wide Application】Electric fuel pump Fit all 12 Volt Cars such as Toyota, Ford, Honda, Mazda, and any other suitable car Trucks , Boats & Generators..
Check Stock

HOOAI Carburetor For Briggs & Stratton 799866 790845 799871 796707 794304 Toro Craftsman Engine

  • 799866 Carburetor fits Most 122000 Model Briggs & Stratton Engines..
  • 799866 Carburetor 128L05 128L07 128M02 128M05 128M07 128T02 128T05 128T07 12F802 12F805 12F807 12F809 12F812 12F882 12F887 12F889 12H802 12H805 12H807....
  • 799866 Carburetor Fits Briggs & Stratton 790845 799871 799866 796707 794304 Quantum Engine 4 Cycle Mower Lawn Mower Generator Quantum Engine....
  • HOOAI locates within the states, we provide carefree return, and 90 days money back guarrantee! Lifetime warranty against manufacturer defect!.
Check Stock

Seachoice 21391 Low Perm Fuel Line Kit, for Mercury Engines, 3/8 Inch x 7 Feet, with Fast Priming High-Output Primer Bulb

  • Provides reliable and efficient priming to help start a Mercury engine.
  • Fast-priming, high-output primer bulb is engineered to reliably maintain flexibility and retain its shape in hot and cold temperatures.
  • Industry leading vertical fuel draw accommodates priming in any application.
  • Kit includes low-permeation primer bulb, fuel line fittings, stainless steel hose clamps, and 3/8-inch x 7 foot-long heavy duty, kink-resistant fuel line.
  • Kit is compatible with ethanol blended fuels.
  • Kit meets all EPA, CARB, USCG and ABYC requirements.
Check Stock

Harbot Carburetor for Harbor Freight Chicago Predator 3000 3500 3050 3200 4000 Watts Gasoline Generator with Fuel Filter Gasket

  • Fit for Harbor Freight Chicago Electric Branded Predator Series 3000/3050/3200/4000 Watts Gasoline Generator Powered by a 208CC/212CC 6.5HP/7HP Engine.
  • Fits Part Number: 67560, 67561, 68527, 68528, 69675, 69676, 69728 & 69729.
  • Package include 1 carburetor, 3 gaskets, 1 fuel filter, 1 fuel line, 2 clamps,1 spark plug.
Check Stock

KIPA 5/16\ Inch ID Fuel Line Set - 2 Meter / 6 Foot 5/16\ Inch Fuel Line + 4 Pcs 5/16 Inch Fuel Filters + 20 Pcs 2/5\ ID Hose Clamps for Kawasaki Kohler Briggs & Stratton Small Engines

  • ...sistant nitrile tube with a covering that resists weathering, ozone ,heat and can be used for ethanol-laced fuels and diesel fuel. This fuel hose is SAE 30R9-rated that will withstand up to 120 psi and 300 degrees..
  • Fitment: includes 6 Feet 5/16" Fuel Line.
  • 4Pcs x 1/4 Inch & 5/16 Inch Fuel Filters.
  • 20 x 2/5" ID Hose Clamps. Fuel filters and hose clamps are required for the use of fuel line. You do not need to purchase those part extra. They could be used widely for update your fuel line system, such as outboard boat system, motorcycles, ATVs, UTVs, Go Kart, Auto Vehicle's. Fuel line kit could also be used widely on lawnmower, Generator, power equipment and small engines Tool Etc..
  • Perfect fuel filters, They could effectively Filter the impurities, dirt, particles in fuel, prevent blockage of carburetor & Fuel pump & Fuel Tank, transmiss Steady clean fuel flows and keep engines Running at the top performance...
  • Hose Clamps: They are Made of 65Mn Spring Steel, durable and can be reused. Tight clamping force prevents liquid leakage, make your fuel line mounting all the safe..
  • Super Pressure rating and permeability. Each KIPA Fuel Line sections are strictly tested to ensure the durable safe and reliable use. KIPA fuel line reduce permeability we will save mo....
Check Stock

Yermax 951-10974A Snow Blower Carburetor for 951-10974 951-12705 MTD Troy Bilt Craftsman Yard Machines Snow Blower

  • Carburetor replace # MTD 951-10974 951-10974A 951-12705.
  • Fit MTD engine: 165-SU 165-SUB 165-SUB-11 165-SUC 265-SU 265-SU-11 265-SUA 365-SUA 365-SUB.
  • Package includes 1 carburetor, 3 gasket, 1 primer bulb, 1 fuel line, 2 clamps, 1 fuel filter, 1 spark plug.
Check Stock

Mr. Gasket - 9710 Fuel Press Regultr W/Hdwr, Chrome

  • Fits 5/16 inch and 3/8 inch inside diameter fuel line.
  • Not for fuel injected systems, Max inlet pressure 9 PSI.
  • Adjusts fuel pressure from 1 to 6 pounds.
Check Stock