Adafruit FTDI Serial TTL-232 USB Cable [ADA70]
- Works with 5V boards with minor tweaking.
Top Ftdi Basic Breakout 3v Reviews
DTECH FTDI USB to TTL Serial 3.3V Adapter Cable 6 Pin 0.1 inch Pitch Female Socket Header UART IC FT232RL Chip Windows 11 10 8 7 Linux 6ft Black
- 6 ft FT232 USB to TTL serial adapter 3.3V (with 6 pin 0.1” pitch female socket header) connects devices with 3.3 V logic level UART signals....
- A genuine FT232RL chip module is housed in USB 2.0 type A male terminal for wider compatibility and supports reliable data transfer rates.
- 6 feet FTDI USB to TTL serial cable 3V3 (6 way outputs) provides access to Tx, Rx, RTS#, CTS#, VCC (5v) and GND (power line provides 5V and data....
- FTDI chipset on the PCB board has configurable internal EEPROM and UART signals can be individually inverted by configuring the EEPROM.
- 6 pin header USB TTL UART converter cord is compatible with Windows 11, 10, 8, 8.1, 7 (32, 64-bit), 2008/XP/Vista/CE, MacOS, Linux 2.4 and greater.
Adafruit ItsyBitsy M4 Express Featuring ATSAMD51
- The Adafruit ATWINC1500 WiFi Breakout uses SPI to communicate, so with about 6 wires, you can get your wired up and ready to go. Right now the Atmel-supplied library works great with Arduino M0's and M4s but does not work on Uno (328P) and may not work on other Arduinos. You can clock it as fast as 12MHz for speedy, reliable packet streaming. And scanning/connecting to networks is very fast, a few seconds..
- This module works with 802.11b, g, or n networks & supports WEP, WPA and WPA2 encryption. You can use it in Soft AP mode to create an ad-hoc network. For secure client connections, there is TLS 1.2 support in firmware 19.4.4!.
- Since this is our new favoritest SPI-protocol WiFi module we've decided to make a little breakout for it. The breakout comes with level shifting on all the input pins so you can use it with 3V or 5V logic. A 3.3V voltage regulator that can handle the 300mA spikes lets you power from 3-5.5VDC..
- There's also 3 LEDs that you can control over the SPI interface (part of the library code) or you can have controlled by the Arduino library. They'll light up when connected to an SSID, or transmitting data..
DTECH FTDI USB to TTL Serial 3.3V Adapter Cable TX RX Signal 3 Pin 0.1 inch Pitch Female Socket FT232RL Chip Windows 11 10 8 7 Linux MAC OS 6ft Black
- 6 ft USB to TTL serial adapter (with 3 pin 0.1” pitch female header socket) connects devices with 3.3 V logic level UART signals interface to a....
- A genuine FT232RL chip module is housed in USB 2.0 type A male terminal for wider compatibility and supports reliable data transfer rates.
- 6 feet FTDI USB to TTL serial cable (3 way output flying leads ) provides access to UART (transmit) Tx, (receive) Rx and GND.
- FTDI chipset on the PCB board has configurable internal EEPROM and 3.3V UART signals can be individually inverted by configuring the EEPROM.
- 3V3 TTL to USB converter cord is compatible with Windows 11, 10, 8, 8.1, 7 (32, 64-bit), 2008/XP/Vista/CE, Mac OS, Linux 2.4 and greater.
Treedix TCA9548A I2C Multiplexer Breakout Board 8 Channel Expansion Board with pi Header for Arduino
- The TCA9548A Breakout board supports communicating with multiple I2C devices with the same address, making it easy to interface with them..
- TCA9548A multiplexer features: bidirectional eight-channel I2C multiplexer, active low reset input.
- The default address of this expander is 0x70, the address can be changed, and can be set within 0x70~0x77..
- In the address of 0x70~0x77, 8 expanders can be cascaded, and each expander can be connected to 8 devices with the same address, so that the same I2C port can be connected to 64 devices with the same address and can be used normally..
- The chip is compatible with 3V and 5V and can be used with any logic level.
BaoFeng UV-5R Plus Qualette Two way Radio (Flame Red)
- Frequency Range: 136-174/400-480 MHz. FM Radio.
- Comes with metallic rugged shell, more durable than previous UV-5R and UV-5RA. Cool and perfect for outdoor operation, car racing, off-road trip, emergency rescue..
- Easy to program some basic settings via keypad or connect with PC. Support CHIRP and CPS. Recommend cable: Radioddity PC001 FTDI programming cable (work with latest Windows, macOS, Ubuntu systems)..
- Classic UV-5R compact design, compatible with UV-5R 3800mAh extended batteries as well as other 5R series accessories..
- Lightweight and versatile, full HD color LED display, exquisite and clarity..
DAOKI 2 pcs 1.7-5V LSM6DS3 Module 6 Degrees of Freedom Breakout IIC/SPI Transfer Digital Sensor Vibration Sensor Module Acceleration Sensor Accelerometer Gyro Embedded with Dupont Line
- 【Application configuration】: Each LSM6DS3 Breakout has been designed to be super-flexible and can be configured specifically for many applications. With the LSM6DS3 Breakout you will be able to detect shocks, tilt, motion, taps, count steps, and even read the temperature!.
- 【Basic features】: The LSM6DS3 is a accelerometer and gyroscope sensor with a giant 8kb FIFO buffer and embedded processing interrupt functions, specifically targeted at the cellphone market. Due to the capabilities and low cost of the LSM6DS3 we've created this small breakout board just for you!.
- 【Special Note】: Please be aware that the LSM6DS3 is a 3.3V device so that powering voltages above ~ 3.6V can permanently damage the IC. A logic level change is required for any development platform operating at 5V..
- 【Data accuracy】: LSM6DS3 is capable of reading accelerometer data up to 6.7 kS / s and gyro data up to 1.7 kS / s for more accurate motion detection..
- 【Original manufacturing】: 100% of our products are made of original electronic components, please rest assured to buy and use.
Clock Splitter, Electronic Component Stable for Home for Industry
- Si5351A clock generator is an I2C controller clock generator. It uses the onboard clock to drive multiple PLLs and clock dividers through I2C instructions. By setting for and divider, you can make precise arbitrary frequencies..
- Most importantly, we even provide excellent tutorials and libraries to help you get started! Our is designed to work for microcontrollers and IDEs, but it can be easily ported to your favorite platform through I2C support..
- With the breakthrough for Adafruit's Si5351A clock generator, you will never look for another crystal! The chip has an accurate 25MHz crystal reference voltage source and internal for and frequency divider, so it can generate almost any frequency, from 003c8KHz to 150+ MHz..
- There are three independent outputs, and each output can have a different frequency. Through a breadboard friendly plug or optional SMA connector, the output is 3Vpp..
- Such convenient small chip is put on its own breakout board PCB, with 3.3V LDO regulator, so it can be powered by 3-5VDC. We also placed a level circuit on the I2C line, so you can safely use the chip under 3V or 5V logic..
Electronic Component, High Clock Splitter Practical for Home for Industry
- With the breakthrough for Adafruit's Si5351A clock generator, you will never look for another crystal! The chip has an accurate 25MHz crystal reference voltage source and internal for and frequency divider, so it can generate almost any frequency, from 003c8KHz to 150+ MHz..
- Si5351A clock generator is an I2C controller clock generator. It uses the onboard clock to drive multiple PLLs and clock dividers through I2C instructions. By setting for and divider, you can make precise arbitrary frequencies..
- There are three independent outputs, and each output can have a different frequency. Through a breadboard friendly plug or optional SMA connector, the output is 3Vpp..
- Such convenient small chip is put on its own breakout board PCB, with 3.3V LDO regulator, so it can be powered by 3-5VDC. We also placed a level circuit on the I2C line, so you can safely use the chip under 3V or 5V logic..
- Most importantly, we even provide excellent tutorials and libraries to help you get started! Our is designed to work for microcontrollers and IDEs, but it can be easily ported to your favorite platform through I2C support..
Clock Splitter, Convenient Good Performance Electronic Component for Home for Industry
- With the breakthrough for Adafruit's Si5351A clock generator, you will never look for another crystal! The chip has an accurate 25MHz crystal reference voltage source and internal for and frequency divider, so it can generate almost any frequency, from 003c8KHz to 150+ MHz..
- Si5351A clock generator is an I2C controller clock generator. It uses the onboard clock to drive multiple PLLs and clock dividers through I2C instructions. By setting for and divider, you can make precise arbitrary frequencies..
- There are three independent outputs, and each output can have a different frequency. Through a breadboard friendly plug or optional SMA connector, the output is 3Vpp..
- Such convenient small chip is put on its own breakout board PCB, with 3.3V LDO regulator, so it can be powered by 3-5VDC. We also placed a level circuit on the I2C line, so you can safely use the chip under 3V or 5V logic..
- Most importantly, we even provide excellent tutorials and libraries to help you get started! Our is designed to work for microcontrollers and IDEs, but it can be easily ported to your favorite platform through I2C support..
Clock Splitter, Good Performance High Practical Electronic Component for Industry for Home
- With the breakthrough for Adafruit's Si5351A clock generator, you will never look for another crystal! The chip has an accurate 25MHz crystal reference voltage source and internal for and frequency divider, so it can generate almost any frequency, from 003c8KHz to 150+ MHz..
- There are three independent outputs, and each output can have a different frequency. Through a breadboard friendly plug or optional SMA connector, the output is 3Vpp..
- Such convenient small chip is put on its own breakout board PCB, with 3.3V LDO regulator, so it can be powered by 3-5VDC. We also placed a level circuit on the I2C line, so you can safely use the chip under 3V or 5V logic..
- Si5351A clock generator is an I2C controller clock generator. It uses the onboard clock to drive multiple PLLs and clock dividers through I2C instructions. By setting for and divider, you can make precise arbitrary frequencies..
- Most importantly, we even provide excellent tutorials and libraries to help you get started! Our is designed to work for microcontrollers and IDEs, but it can be easily ported to your favorite platform through I2C support..
DSD TECH SH-U09C5 USB to TTL UART Converter Cable with FTDI Chip Support 5V 3.3V 2.5V 1.8V TTL
- Support 4 kinds of TTL levels:This is a versatile USB to TTL converter. It is powerful enough to handle almost all TTL level communications. It is....
- FTDI FT232RL Chip:Built-in original FTDI FT232RL Chip.The DSD TECH brand never uses cheap fake chips..
- Not only provides access to UART Transmit (Tx), Receive (Rx), RTS#, CTS#, VCC and GND pins,but also provides access to DSR,R1,DCD,DTR,RESET pins.
- Protective case: Come with a protective case, this transparent protective case can effectively prevent static interference from the hand and prevent....
- WARRANTY:DSD TECH back this FTDI FT232RL USB to TTL UART adapter with 12 months warranty.If you meet any question, please contact us, we will fix your....
InstallerParts 15 ft DB9 Male to Female 9 Conductor Serial Cable
- 【Connectivity】Connects from the USB-C port of a PC /computer to the RJ45 console port of a networking switch, a modem or router with a console port.
- replaces rs232 serial port perfectly, no more RS232/DB9 adapter needed. This is a Console Cable, will NOT operate over an Ethernet port for internet access!!!.
- 【Compatible Models】a practical serial cable to pair with branded Router, Switch, Firewall, Wireless LAN controller and other devices with console port, such as Cisco, Ubiquiti, Linksys, Juniper, Fortigate, Mikrotik, Huawei, HP ProCurve, H3C,ZTE. Powered by USB port, no external power supply required..
- 【Compatible Systems】built-in with FTDI-FT232RL chip, fully support Windows 10, Windows 8 / 8.1 /7, XP, Vista, macOS, Mac OS X, Linux. USB C rollover cable reverses all 8 pins in the cable to communicate from a computer Type-C port to a console port..
- 【Driver Installation】drivers needed before get the cable to work, drivers and instructions available for download from CableCreation.
- Windows 10 and the latest macOS usually include FTDI drivers as part of the OS when using this FTDI USB cable..
- 【Warranty】CableCreation provides 24-month product warranty, lifetime technical support and friendly 24/7 customer service..