Top Friction Modification Reviews

Front R1 Concepts Optimum OEp Series Brake Pads With Rubber Steel Rubber Shims

  • Provides correct friction performance, resulting in the safest possible braking.
  • Rotor friendly with proven longer rotor and pad life.
  • Designed to deliver a consistent pedal feel and superb brake response.
Check Stock

Chooee Teflon Brake Cable,Brake Cables for Bike,Road Bicycle

  • Universal Standard Brake Cable Set, For MTB or Road Bikes.
  • Teflon shift cable ,low-friction, smooth Brake control experience, get this teflon coating Cables wires presented by Chooee brand.
  • Cable Never born embroidered is the top best,Compatible for Shimano and SRAM brake.
  • Long length and various head to fit mountain bike,road bike.mtb bmx,.
  • Don't worry about length modification,2pcs1700mm brake cable,Can be used for front or rear cable.
Check Stock

Garlock 29602-4110 Guardian Goulds 3196LTX Bearing Isolator, Bi-Directional, 1.875\ x 2.750\ x 0.700\ Outboard Side, Bronze

  • Designed to directly replace existing labyrinth seals on pumps without modification.
  • Provides dust tight protection and heavy water jet spray (26gpm) for pumps. Tested to IP 66 Ingress protection based on IEEE test standard.
  • Non-contact design reduces friction on the shaft reducing energy consumption and prevents shaft grooving.
  • Bronze construction does not rust and conforms to API 610 standard.
  • Bi-directional design also prevents leakage of lubrication with a single seal.
Check Stock

Garlock 29502-4107 ISO-Gard Goulds 3196MTX Bearing Isolator, Bi-Directional, 1.750\ x 2.875\ x 0.750\ Inboard Side, Blue

  • Designed to directly replace existing labyrinth seals on pumps without modification.
  • Protects pumps against water spray (3gpm) and dust. Tested to IP 55 Ingress protection based on IEEE standard.
  • Non-contact design reduces friction on the shaft reducing energy consumption and prevents shaft grooving.
  • PTFE construction  with excellence chemical resistance.
  • Bi-directional design also prevents leakage of lubrication with a single seal.
Check Stock

Garlock 29507-4106 ISO-Gard Goulds 3196STX Bearing Isolator, Bi-Directional, 0.875\ x 1.250\ x 0.625\ Outboard Side, Blue

  • Designed to directly replace existing labyrinth seals on pumps without modification.
  • Protects pumps against water spray (3gpm) and dust. Tested to IP 55 Ingress protection based on IEEE standard.
  • Non-contact design reduces friction on the shaft reducing energy consumption and prevents shaft grooving.
  • PTFE construction  with excellence chemical resistance.
  • Bi-directional design also prevents leakage of lubrication with a single seal.
Check Stock

TUCKPATTS 2pcs Universal Non-Slip Automatic Gas Brake Foot Pedal Pad Cover Car Accessories

  • Non-slip surface design, safe for driving and reduce foot fatigue.
  • Best fitting, Easy to install. No modification required.
  • Make you more easily manipulated to pedal, increase the contact area pedal, for driving adds a comfortable safety,car more easily.
  • High toughness pedal in middle, lateral high elastic tape set prevent slippery, can strengthen the foot pedal and the friction coefficient, prevent slippery effect super good, arc curvature design, to ensure safety..
  • Seven words clip attached to the original of the pedal car fixed, need not drilling, fixed way for screw, convenient installation, most models applicable.
Check Stock

Garlock 29602-4124 Guardian Bearing Isolator, Durco Mark 3/Group 2, Bi-Directional, 1.875\ x 2.625\ x 0.700\ Inboard Side, Bronze

  • Designed to directly replace existing labyrinth seals on pumps without modification.
  • Provides dust tight protection and heavy water jet spray (26gpm) for pumps. Tested to IP 66 Ingress protection based on IEEE test standard.
  • Non-contact design reduces friction on the shaft reducing energy consumption and prevents shaft grooving.
  • Bronze construction does not rust and conforms to API 610 standard.
  • Bi-directional design also prevents leakage of lubrication with a single seal.
Check Stock

Garlock 29699-0319 Guardian Bearing Isolator, Durco Mark 3/Group 3, Bi-Directional, 2.625\ x 3.677\ x 0.700\ Outboard Side, Bronze

  • Designed to directly replace existing labyrinth seals on pumps without modification.
  • Provides dust tight protection and heavy water jet spray (26gpm) for pumps. Tested to IP 66 Ingress protection based on IEEE test standard.
  • Non-contact design reduces friction on the shaft reducing energy consumption and prevents shaft grooving.
  • Bronze construction does not rust and conforms to API 610 standard.
  • Bi-directional design also prevents leakage of lubrication with a single seal.
Check Stock

Garlock 29502-4125 ISO-Gard Bearing Isolator, Durco Mark 3/Group 3, Bi-Directional, 2.625\ x 3.677\ x 0.750\ Inboard Side, Blue

  • Designed to directly replace existing labyrinth seals on pumps without modification.
  • Protects pumps against water spray (3gpm) and dust. Tested to IP 55 Ingress protection based on IEEE standard.
  • Non-contact design reduces friction on the shaft reducing energy consumption and prevents shaft grooving.
  • PTFE construction  with excellence chemical resistance.
  • Bi-directional design also prevents leakage of lubrication with a single seal.
Check Stock

For Chevrolet Chevy Silverado Accessories 2019-2020 2021 Automatic Transmission Non-Slip Metal Rubber Brake Foot Car Gas Pedal Cover Trim 2pcs (Pedal)

  • For Chevrolet Chevy silverado 2019-2020 2021.
  • High quality stainless steel with rubber matte finished.
  • For Chevrolet Chevy silverado Brake gas pedal cover,non-slip surface design, safe for driving and reduce foot fatigue, Best fitting.
  • High toughness pedal in middle, lateral high elastic tape set prevent slippery, can strengthen the foot pedal and the friction coefficient, prevent slippery effect super good, arc curvature design, to ensure safety..
  • Easy to install. Please Remove your car pedal rubber pad, then install our silverado foot pedal cover. Please check the noted picture of the installation. No modification required..
Check Stock

CPB S180 Large Anti Static Silicone Repair Mat Heat Resistant Magnetic Electronic Mat with ESD Wrist Strap and 3 Tweezers for Soldering Iron Laptop Cellphone Etc 21.6” x 13.8” -Blue

  • INCREASE ACCURACY - Lightening your mouse allows for better enemy tracking as they move around..
  • QUICKER REACTION TIME - This modification REDUCES WEIGHT BY 9.6 GRAMS. This weight reduction will reduce your flick shot times..
  • MORE NATURAL FEEL - A lighter mouse makes hand movements feel more natural and reduces friction between the mouse stakes and pad..
  • NO MORE OVERSHOOTING - Less mass and inertia allow you to stop your crosshair on a dime..
  • IMPROVE THE MOUSE YOU ALREADY LOVE - Upgrade the mouse you already know and are comfortable with. There is no need to go buy an exotic brand mouse....
Check Stock

EPOMAKER Budgerigar 30 Pieces 47gf Tactile Mechanical Keyboard Switches Set, 55gf Initial Force Factory Lubed Switch with POM Stem, Dual Spring, Nylon Housing for Gaming DIY Keyboard

  • ...with general MX structure so that they can fit most keycaps sets with (X) cross stem. This greatly improves the compatibility and you can feel free to change the switch and remake your own keyboard.
  • 【Built-in LED Slot & Durable Lifespan】 Equipped with LED slots for modification, the backlight can be shine-through even with PBT housings in the EPOMAKER Budgerigar switches. This provides more fun feature and options for DIYers. With a strong dual spring, the lifespan can go up to 100 million times of keystrokes based on laboratory durability test. Get your keyboard something new and have fun with them!.
Check Stock

Dokili 3AN-16AN Adjustable Fitting Wrench Lightweight Black Aluminum Tool Spanner for An Hose Fitting Adapters End

  • Top quality material - Dokili fitting wrench is constructed of aircraft grade lightweight 6061-T6 aluminum material with sandblasting technology to enhance the coefficient of friction, beautify, improve the smoothness of the material surface and other effects.With just one hand movement! Effective, practical, light weight..
  • Size - Wrench Length:7.2in(18.5cm), Wrench Width:2.7in(7.1cm)..
  • Advanced Design - Particularly it is convinent to work in narrow spaces due to it is ergonomically designed.Allowing adaptive sizes：AN3 AN4 AN6 AN8 AN10 AN12 AN14 AN16.AN wrench is the hexagonal jaws which lock onto -AN fittings so much better than straight jaws.
  • Function - AN3-AN16 hose connector adjustable wrench spanner, light aluminum wrench, mainly used in car modification, automobile and motorcycle tubing interface extrusion and They are also the solution to your problems with taps, valves, pipes and piping, radiators boilers, wheels other uses..
  • Advice - Wrap the wrench's jaws with electircal tape to better protect the fitting and wrench.Recommended for Aluminum fitting, easy to damage for other materials. Some customers feedback the adjustment knob edges are slightly sharp. Please be careful, avoid cutting your finger..
Check Stock