Top Frequency Response Analyzer Reviews

Portable TinySA Spectrum Analyzer, SEESII Upgraded V0.3.1 Tiny Frequency Analyzer with Antenna SMA Male to UHF Female Cables, 100kHz to 960MHz MF/HF/VHF UHF Input, 2.8'' Touchscreen Signal Generator

  • 【Frequency Range 】Tiny Spectrum Analyzer with two inputs, high quality MF/HF/VHF input for 0.1MHZ-350MHz, lesser quality UHF input for 240MHz-960MHz. Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz. Color display showing 290 scan points covering up to the full low or high frequency rangefrequency range. The tinySA contains all the components of a conventional heterodyne swept spectrum analyzer..
  • 【Built-in Calibration Signal Generator】When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz. Built-in calibration signal generator that is used for automatic self test and low input calibration..
  • 【Tiny Spectrum analyzers】Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz.Color display showing 290 scan points covering up to the full low or high frequency range. Bulit-in rechargeable battery allowing a minimum of at least 2 hours portable use..
  • 【PC Control】Connected to a PC via USB it becomes a PC controlled Spectrum Analyzer.The USB interface implements the Serial over USB (CDC) protocol and there is a large set of commands that can be invoked over the serial interface. These co....
Check Stock

Signal Generator, Multi-Function LHT00SU1 Oscilloscope 2 Channel Input Virtual Oscilloscope Logic Analyzer USB Logic Analyzer

  • 【Supported Protocols】Serial Peripheral Interface, IIC, UART, SMBus, I2S, CAN, Parallel, Custom, Search, Async, 1-Wite, PS / 2.
  • 【Multi Purpose】8-channel logic analyzer, Data Logger. PWM controller, Frequency generator. Frequency meter, Remote controller.
  • 【Dual Channel】Dual channel voltmeter, Mixed signal oscilloscopes and logic analyzer, Dual input oscilloscope (single, 16Msps, 3MHz bandwidth).
  • 【Frequency Meter】PWM controller, Frequency generator. Frequency meter, Remote controller.
  • 【100% Guarantee】High quality product, we promise to do everything possible to satisfy all customers. However, if you are not 100% satisfied with our service or our products, simply contact us. We are always at the side of our customers to support and continuously seek new ways to improve.
Check Stock

Rockville REQ42-S 2 x 21 Band Home Theater Equalizer w/ Audio Spectrum Analyzer

  • Rockville REQ42-S 2 x 21 Band Home Theater Equalizer w/Spectrum Analyzer, Dual Channel 21+21 Band Graphic Equalizer (total of 42 bands), Blue LED on each Equalizer Slide Control.
  • RCA stereo input: DVD/Tape/Tuner/Aux-MP3 with Front Panel Selector Switch, RCA Stereo Record Output.
  • Front Panel 3.5mm iPod/MP3 Player Input Jack, Dual VU Meters Level Monitor.
  • Individual LED Indicators, Outputs-RCA (REC, Mail), Multi Color LED Display.
  • Low/High Function, Frequency Response: 20-20,000 Hz, Signal to Noise Ratio: 80dB, Removable Rack Mount Brackets.
Check Stock

Portable TinySA Spectrum Analyzer,SEESII Upgraded V0.3.1 Handheld Tiny Frequency Analyzer 100kHz to 960MHz MF/HF/VHF UHF Input,Signal Generator with 2.8 inch Touch Screen with ESD Protect Function

  • 【Frequency Range 】Tiny Spectrum Analyzer with two inputs, high quality MF/HF/VHF input for 0.1MHZ-350MHz, lesser quality UHF input for 240MHz-960MHz. Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz. Color display showing 290 scan points covering up to the full low or high frequency rangefrequency range. The tinySA contains all the components of a conventional heterodyne swept spectrum analyzer..
  • 【Built-in Calibration Signal Generator】When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz. Built-in calibration signal generator that is used for automatic self test and low input calibration..
  • 【Tiny Spectrum analyzers & ESD Function】Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz.Color display showing 290 scan points covering up to the full low or high frequency range. Bulit-in rechargeable battery allowing a minimum of at least 2 hours portable use.The performance of the 2021 latest version 3.1 will be more stable and sensitive, with a new ESD protrcted function enable the product to have a higher antistatic level and a longer service life..
Check Stock

35?4400MHz Portable Spectrum Analyzer,3.5 ”TFT Handheld Frequency Analyzer Amplitude Bandwidth Frequency Signal Generator,Tracking Generator Steps Sweep Signal Generator (PLZ-SA354400A 3.5inch LCD)

  • [ Accurately Track ] This portable spectrum analyzer 35‑4400MHz Equipped with a tracking source TG, the frequency of the signal output by the tracking source can accurately track the tuning frequency of the spectrum analyzer..
  • [Output Range]35MHz‑4.4GHz signal source output range, can display and analyze a simple spectrum.The input dBm scope is -80dBm~0dBm, output dBm is 0dBm..
  • [4 Major Modes ]Four major modes: Network mode, Spectrum mode, Point frequency mode, Sweep mode. After power on, the default mode is Network mode..
  • [3.5 Inch Touch Display ] Touch function, without button operation, you can directly click on the touch screen to operate..
  • [Portable ] Handheld spectrum analyzer Easy to carry and tiny , powered by USB-C cable,it can be easily hand‑held for measurement or carried to various places.Made of aluminum alloy material, wear resistance and can provide long service time..
Check Stock

TinySA Spectrum Analyzer,Handheld Tiny Spectrum Analyzer TinySA 2.8inch Touch Screen,Portable Frequency Analyzer 0.1MHz~ 960MHz MF/HF/VHF UHF Input, Signal Generator with Battery

  • 【Input Frequency Range】Spectrum Analyzer with two inputs, high quality MF/HF/VHF input for 0.1MHZ-350MHz, lesser quality UHF input for 240MHz-960MHz..
  • 【2-in-1】Built-in calibration signal generator that is used for automatic self test and low input calibration.When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz..
  • 【2.8inch Touching Display Screen】Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz.Display resolution 320*240 pixels.Color display showing 290 scan points covering up to the full low or high frequency range.Scanning speed of over 1000 points/second using largest resolution filters..
  • 【PC Controlled 】Connected to a PC via USB it becomes a PC controlled Spectrum Analyzer.Bulit-in rechargeable battery allowing a minimum of at least 2 hours portable use.*Resistive touch contro*Jog switch control*USB serial port control.
  • 【Package List】1x Tiny Spectrum Analyzer.
Check Stock

NanoVNA-H REV3.4 Vector Network Analyzer,10KHz -1.5GHz HF VHF UHF Antenna Analyzer Portable VNA with SMA Adapter

  • NEW UPGRADED VERSION: This Vector Network Analyzer added battery circuit management, more secure. Redesigned PCB, you can connect to mobile phone with....
  • IMPROVED HIGH ACCURACY: HF VHF UHF Antenna Analyzer Measuring added a shell case, which is protective and dust-proof.The metal shield is designed to....
  • IMPROVED FREQUENCY ALGORITHM RANGE: Frequency range is 10KHz -1.5GHz .The improved frequency algorithm can use the odd harmonic extension of si5351 to....
  • MINI & PORTABLE:Upgraded NanoVNA that provides perfect vector network measurement capabilities, tiny and handheld, stand-alone with 2.8-inch LCD....
  • WHAT CAN YOU GET: Upgraded NanoVNA hostx1, USB Type-C data cable x1, 30mm SMA male to male RG174 RF cable x2, SMA simple calibration kit x1, SMA....
Check Stock

2023 AURSINC Ultra TinySA 4” Spectrum Analyzer – Portable V0.4.5.1 100kHz-5.3GHz Frequency Analyzer | Built-in 3000mAh Battery & 32GB SD Card | RBW LNA DANL Phase Noise RF Signal Generator

  • 2023 NEWEST TINYSA: Produced by Hugen, AURSINC ULTRA Tinysa owns high performance frequency in 100khz to 800MHz, and when in ultra mode, the analyzer can reach 5.3GHz. With new 4” touchscreen display and installed with the latest hardware system V0.4.5.1. tinysa is more professional, stable, sensitive and easy to be operated.
  • A Lab-grade Spectrum Analyzer: The ultra-wide range frequency can reach around 6GHz, together with the excellence of phase noise [email protected], DANL -166dBm/Hz.
  • In Ultra mode the input low pass filter is automatically enabled for all frequencies within the pass-band of the low pass filter (up to 750MHz). For higher frequencies the low pass filter will be bypassed and the measurement will be slower due to the multiple measurements per frequency required for the mirror and spur elimination algorithm.
  • Differences to the Former TinySa: The first big one is that now the default maximum frequency is 800mhz, so you no longer have to switch between low and high range,and can monitor the complete range in one sweep.
  • Second,In the level menu, there is the LNA, which will provide 20db of extra gain if you have very low level signal.
  • Lastly, RBW frequency from 200hz to 850khz which can be set to match the measurement requirements, meet ....
Check Stock

Spectrum Analyzer USB 35-4400M Signal Source RF Frequency Domain Black Analysis Tool with Tracking Source Module Industrial Supplies

  • RF Frequency Domain Analysis Tool. Sweep Bandwidth: 33mHz---4400mHz.
  • Turn on the tracking source output bandwidth 33mhz---3000mhz.
  • Made of fine quality material, the Spectrum Analyzer has a long service life. Small and portable, high accuracy.
  • Signal Source Spectrum Analyzer. Software used on the computer side: NWT4.11.09 version.
  • Computer operating system: Winxp, Win7, Win10.
  • 35-4400M Signal Tracking Source Module is an RF frequency domain analysis tool.
  • Signal Tracking Source Module with Shell. Sweep Step: ≥33-68.75mHz/125Hz, 68.75-137.5mHz/250Hz, 137.5-275mHz/500Hz, 275-550mHz/1kHz,....
Check Stock

[2022 Upgraded] AURSINC NanoVNA-H4 V4.3 Vector Network Analyzer 10KHz-1.5GHz HF VHF UHF 4'' Portable Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart

  • ...a storage(support up to 32GB memory card, not included in the package). The NanoVNA-H4 vector network analyzer is a Hugen Origin that provides perfect vector network measurement capabilities, tiny and handheld, stand-alone with 4-inch LCD display, portable with 1950mAh battery powered or USB powered.
  • ✔️[Improved Frequency Algorithm] The improved frequency algorithm of NanoVNA-H4 can use the odd harmonic extension of si5351 to support the measurement frequency up to 1.5GHz. The 50K-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-900MHz band provides better than 60dB of dynamics, and the 900M-1.5GHz band is better than 40dB of dynamics.
  • The metal shield is designed to reduce the external interference and improve the measurement accuracy.
  • ✔️[Antenna Performance Measurement] The default firmware main function for NanoVNA-H4 vector network analyzer is used for antenna performance measurement. The TX/RX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port wiring.
  • ✔️[PC Control] Using PC software NanoVNASaver, NanoVNA-H4 antenna analyzer can connect to a NanoVNA and extracts the data for display on a compute....
Check Stock

Portable tinySA Spectrum Analyzer - AURSINC Hand Held Frequency Analyzer 2021 Upgraded V0.3.1 | 100kHz to 960MHz MF/HF/VHF UHF Input | ESD Protected Function & 2.8 inch Touchscreen | Signal Generator

  • ...are installed which will be more stable and sensitive with higher antistatic level and longer service life. Spectrum Analyzer with two inputs, high quality MF/HF/VHF input for 0.1MHZ-350MHz, lesser quality UHF input for 240MHz-960MHz. Switchable resolution bandpass filters for both ranges between 2.6kHz and 640kHz.
  • [Frequency Range] Spectrum analyzers like the tinySA use a resolution filter that is used to isolate the input power in a small frequency range. This resolution filter is swept across the desired frequency range. The fastest scanning speed occurs with an RBW or 300kHz or wider and is about 2 scans per second. But with increase of the frequency span and decrease of the RBW the scanning speed decreases quickly. A scan from 0MHz to 350MHz with an RBW of 10kHz takes about 2 minutes..
  • [2 in 1 Device] When not used as Spectrum Analyzer it can be used as Signal Generator, MF/HF/VHF sinus output between 0.1MHZ-350MHz, UHF square wave output between 240MHz-960MHz. Built-in calibration signal generator that is used for automatic self test and low input calibration. The tinySA contains all the components of a conventional heterodyne swept spectrum analyzer. Color display showing 290 scan points covering up to the full low or high frequency range.
Check Stock

SDRGEEK TinySA Handheld Tiny Spectrum Analyzer 2.8 Inch Touching Display 100KHz-960MHz Screen Spectrum Analyzers Signal Generator with Battery

  • 【With Two Inputs】Spectrum analyzer with two inputs, fine quality MF/HF/VHF input for 0.1MHz-350MHz, lesser quality UHF input for 240MHz-960MHz. Switchable resolution bandpass filters for both ranges between 2.6KHz and 640KHz..
  • 【MF/HF/VHF Input】Input step attenuator from 0dB to 31dB for the MF/HF/VHF input. Color display showing 290 scan points covering up to the full low or high frequency range..
  • 【Portable and Convenient】Rechargeable battery allowing a minimum of at least 2 hours portable use. Connected to a PC via USB it becomes a PC controlled spectrum analyzer..
  • 【Wide Application】When not used as spectrum analyzer it can be used as signal generator, MF/HF/VHF sinus output between 0.1MHz-350MHz, UHF square wave output between 240MHz-960MHz..
  • 【Package Included】1 * Spectrum Analyzer.
Check Stock

USB Logic Analyzer Device with USB Cable 5MHz 24MHz 8CH 8 Channel UART IIC SPI Debug Logic Analyzer Professional Microcontroller Device Network Analyzing Set for Ardu-ino FPGA ARM M100 SCM

  • ...d, otherwise the measured data will be unreliable..
  • If the logic analyzer works at 24M, the USB device must not only provide a 24M communication rate, but also must ensure that other devices occupy USB resources before the 4 buffers are filled. For these reasons, the logic analyzer cannot always work at the sampling frequency of 24M for a long time, depending on the computer performance, the availability and latency of the USB bandwidth, and other devices that are occupying the USB drive..
  • The normal working voltage of the logic analyzer is below 5.5V, the voltage below 1.5V will be regarded as low level, the voltage between 1.5V and 5.5V will be regarded as high level, the maximum withstand voltage is 7.5V, so please pay attention to the test Voltage..
Check Stock