Top Frequency Counter Signal Generator Reviews

(5PCS) ICS91730AMLFT IC CLOCK GENERATOR LOW EMI 8SOIC 91730 ICS91730

  • PLL and divider :The chip of this signal generator has a 25MHz accurate reference voltage source, and has a PLL and frequency divider inside, so it can generate almost any frequency..
  • three independent outputs :The signal generator has three independent outputs, and each output can have a different frequency..
  • 3.3V LDO regulator :This convenient small chip has a 3.3V LDO regulator and can be powered by 3-5VDC..
  • level shift circuit :There is a level conversion circuit on the I2C line. Generally speaking, you can safely use the chip at 3V or 5V..
  • sleep function :The signal generator has a sleep function, which can reduce power consumption and is very economical and environmentally friendly..
Check Stock

Frequency Generator, DROK DC 3.3V-30V 5-30mA 1Hz-150kHz Adjustable Output PWM Pulse Duty Cycle Square Wave Function Signal Generator Module

  • PARAMETER --- working voltage range 3.3V-30V.
  • APPLICATION --- as square wave signal generator for experimental development.
  • as square wave signal generator for motor driver.
  • as adjustable pulse generator for PWM dimming, speed regulating, etc..
  • DISPLAY--- clear LCD displays frequency & duty ratio value..
  • MODE --- 2 modes, normal mode & accurate mode..
  • PWM output, can set frequency & duty cycle separately.
  • duty cycle upper and lower bounds adjustable.
Check Stock

Signal Generator, DROK DC 3.3-30V Function Generator 5-30mA LCD Display PWM Pulse Frequency Duty Cycle Rectangular Wave Square Wave Signal Generator

  • PARAMETER ---- operating voltage range DC 3.3v~30v.
  • APPLICATION ---- as square wave signal generator for experimental development.
  • as square wave signal generator for motor driver.
  • as pulse generator, control related circuits (PWM dimming, speed regulating)..
  • SERIAL COMMUNICATION ---- support serial communication, TTL level..
  • DATA AUTO STORAGE ---- all parameters will be saved automatically after setting and therefore won't lose when power off..
  • OTHER FEATURES ---- with LCD display to display frequency and duty cycle value.
  • PWM output, can set frequency and duty cycle separately by buttons.
  • frequency value is divided into 4 range and switched automatically, with high precision..
Check Stock

RIGOL DG2102 Function/Arbitrary Waveform Generator,100MHz 2 Channels

  • SiFi (Signal Fidelity) for 100% waveform replication.
  • 2Mpts or 8Mpts/CH(std.), 16Mpts/CH (opt.) arbitrary waveform length.
  • Standard 2 full functional independent channels.
  • ±1ppm frequency stability, -125dBc/Hz phase noise, 200ps low jitter.
  • Built-in 7 digits/s counter up to 200MHz.
  • Intuitive arbitrary waveform editing software.
  • Full modulation supported: AM, FM, PM, ASK, FSK, PSK and PWM.
Check Stock

Pulse Generator, DROK 2pcs LCD Display PWM Frequency 1Hz-150kHz Duty Ratio 0-100 Percent Adjustable Square Wave Rectangular Wave Signal Generator Board

  • DROK pulse generator module operating voltage range is DC 3.3-30V, adjustable pwm frequency range is 1Hz-150kHz, adjustable duty ratio range is 0%-100%..
  • Application: it can be used as a square wave signal generator, generate square wave signal for experimental development.
  • generate square wave signal to control the motor driver.
  • generate adjustable pulse to control the relevant circuit (PWM dimming speed application etc)..
  • High Frequency Resolution: frequency in range 1Hz~999Hz, display resolution is 1Hz.
  • range 1.00kHz~9.99kHz, display resolution is 0.01kHz.
  • range 10.0kHz~99.9kHz, display resolution is 0.1kHz.
  • range 1kHz~150kHz, display resolution is 1kHz..
  • TTL Level Communication: the frequency meter is designed with single-chip TTL level communication, communication standard is 9600 bps..
  • LCD Display: the blue LCD clearly displays frequency and duty ratio, PWM output can set frequency and duty ratio independently..
Check Stock

UNI-T UTG932 + UTP1306, Function Generator and Switching DC Power Supply Kit

  • Mini palm-sized signal generator Palm-sized signal generator, your personal signal output source, bring you a different sense of experience.
  • 60 MHz MAX. OUTPUT FREQUENCY 200 MSa/s SAMPLE RATE 14 bits VERTICAL RESOLUTION 2 CHANNELS - ARBITRARY WAVE LENGT.
  • Standard 2 Channel, multiple waveform signals Maximum output frequency 60MHz, dual channel, multiple waveform signals: sine wave, square, ramp, pulse, noise, DC, arbitrary waveform.
  • Modulation function Easy-to-use modulation types: AM, FM, PM, FSK Built-in 24 arbitrary waveforms 24 kinds of non-volatile digital arbitrary waveform storage.
  • UTG932E 30 MHz 200 MSa/s 14-bit 2 UTG962E 60 MHz 200 MSa/s 14-bit 2.
Check Stock

Professional Upgraded DDS Signal Generator Counter, Seesii 60MHz LCD Display High Precision 200MSa/s Dual-Channel Arbitray Waveform Function Generator Frequency Meter

  • ...pts large scale FPGA integrated circuit and high speed MCU microprocessor. The internal circuit adopts active crystal oscillator as benchmark. So the signal stability is greatly strengthened..
  • 【Storage And Custom】 You can store 99 groups instrument state parameters set by the user, can be called up to Reproduce. Frequency output of Sine wave can be up to 60MHz. 200MSa/s sampling rate. It has 60 positions for saving user-defined waveform. In addition, it has a very good software package that allows you to create your own waves and frequency combinations. After you save them, you can disconnect the unit from the computer and use them for any applications you wish..
  • 【High Precise】 Using Dual-channel DDS signal and TTL electric level output to generate precise, stable, low distortion output signal. includes Sine wave, Square wave, Triangle wave, Sawtooth wave, Pulse wave, white noise, user-defined waveform etc. each channel can be independently set the parameters.Duty cycle of each channel can be adjusted separately. Precision can be 0.1%..
  • 【Frequency Meter】With linear sweep(Max. up to 999.9s) and logarithmic frequency sweep functions.Has a frequency measurement, period measurement, positive and negative pulse width measurement and counting func....
Check Stock

FC-3000P Ham Radio CB Frequency Counter 27Mhz-3000Mhz - High Sensitivity with CTCCSS DCS Decoder for The VHF & UHF - CB Continuous Carrier Signal, Walkie-Talkies, DMR Radio Transceivers

  • ✔️ IDENTIFYING FREQUENCY - The frequency meter measures frequency parameters of the continuous carrier signal walkie-talkies , with signal strength indicator..
  • ✔️ PORTABLE FREQUENCY COUNTER - Counting continuous wave signal comes from Two-way Radio. VHF & UHF frequency measurement, useful for the CB amateur Ham Radio..
  • ✔️ FREQUENCY COUNTER METER RANGE - CB, HAm Radio, DMR frequency range 100Mhz-3000Mhz. Build-in DCS CTCSS Decoder Low PPM crystal time base used to achieve high accuracy measurement.
  • ✔️ EASY TO OPERATE - User friendly controlled with four buttons. The DMR radio frequency counter is compact and handy when needed..
  • ✔️ 100% MONEY BACK GUARANTEE 2 YEARS WARRANTY ensures this will quickly become your favorite no-risk purchase..
Check Stock

Koolertron 15MHz Embeddable Dual-Channel Function Signal Generator Counter,High Precision DDS Arbitray Waveform Generator Frequency Meter 266MSa/s (15MHz)

  • ... Triangle, Pulse, Partial Sine, CMOS, DC level, Half-wave, Full-Wave, Pos-Ladder, Neg-Ladder, Noise, Exponential Rise, Exponential Fall, Tone, sine pulse, Lorentz Pulse, and 60 kinds user-defined waveform etc. each channel can be independently set the parameters..
  • With linear sweep(Max. up to 999.9s) and logarithmic frequency sweep functions.Has a frequency measurement, period measurement, positive and negative pulse width measurement and counting function..
  • Storage feature: You can store 100 groups instrument state parameters set by the user, can be called up to Reproduce. The frequency output of Sine wave can be up to 15MHz. 266MSa/s sampling rate. It has 60 positions for saving user-defined waveform. Waveform Length of each one is 2048 and vertical resolution is 14 bits.
  • The rear case can be easily disassembled, and there is no interface around the generator for easy installation and embedding into the test bench. The Generator is the ideal instrument for electronic engineering, laboratories, production lines, teaching and scientific research..
Check Stock

ICQUANZX Upgraded 60MHz DDS Signal Generator Counter,High Precision Dual-Channel Arbitrary Waveform Function Generator Frequency Meter 200MSa/s (60MHz)

  • Arbitrary Waveform Generator adopts large scale FPGA integrated circuit and high speed MCU microprocessor. The internal circuit adopts active crystal oscillator as benchmark. So the signal stability is greatly strengthened..
  • Using Dual-channel DDS signal and TTL electric level output to generate precise, stable, low distortion output signal. includes Sine wave, Square wave, Triangle wave, Sawtooth wave, Pulse wave, white noise, user-defined waveform etc. each channel can be independently set the parameters..
  • With linear sweep(Max. up to 999.9s) and logarithmic frequency sweep functions.Has a frequency measurement, period measurement, positive and negative pulse width measurement and counting function..
  • Storage feature: You can store 99 groups instrument state parameters set by the user, can be called up to Reproduce. Frequency output of Sine wave can be up to 60MHz. 200MSa/s sampling rate. It has 60 positions for saving user-defined waveform. Waveform Length of each one is 2048 and vertical resolution is 14 bits.
  • This Signal Generator is the ideal instrument for electronic engineering, laboratories, production lines, teaching and scientific research..
Check Stock

Koolertron Upgraded 15MHz DDS Signal Generator Counter,High Precision Dual-Channel Arbitrary Waveform Function Generator Frequency Meter 200MSa/s (15MHz)

  • Arbitrary Waveform Generator adopts large scale FPGA integrated circuit and high-speed MCU microprocessor. The internal circuit adopts the active crystal oscillator as the benchmark. So the signal stability is greatly strengthened..
  • Using Dual-channel DDS signal and TTL electric level output to generate precise, stable, low distortion output signal. includes Sine wave, Square wave, Triangle wave, Saw toothwave, Pulse wave, white noise, user-defined waveform etc. each channel can be independently set the parameters..
  • With linear sweep(Max. up to 999.9s) and logarithmic frequency sweep functions.Has a frequency measurement, period measurement, positive and negative pulse width measurement and counting function..
  • Storage feature: You can store 99 groups instrument state parameters set by the user, can be called up to Reproduce.The frequency output of Sine wave can be up to 15MHz. 200MSa/s sampling rate. It has 60 positions for saving user-defined waveform. Waveform Length of each one is 2048 and vertical resolution is 14 bits.
  • This Signal Generator is the ideal instrument for electronic engineering, laboratories, production lines, teaching and scientific research..
Check Stock

UNI-T MSO3000E Series Digital Oscilloscopes 4CH, 50MHz Built-in Waveform Generator (MSO3154E 150MHz 4CH)

  • Mini palm-sized signal generator Palm-sized signal generator, your personal signal output source, bring you a different sense of experience.
  • 60 MHz MAX. OUTPUT FREQUENCY 200 MSa/s SAMPLE RATE 14 bits VERTICAL RESOLUTION 2 CHANNELS - ARBITRARY WAVE LENGT.
  • Standard 2 Channel, multiple waveform signals Maximum output frequency 60MHz, dual channel, multiple waveform signals: sine wave, square, ramp, pulse, noise, DC, arbitrary waveform.
  • Modulation function Easy-to-use modulation types: AM, FM, PM, FSK Built-in 24 arbitrary waveforms 24 kinds of non-volatile digital arbitrary waveform storage.
  • UTG932E 30 MHz 200 MSa/s 14-bit 2 UTG962E 60 MHz 200 MSa/s 14-bit 2.
Check Stock

MFJ-259D MFJ259D Original MFJ Enterprises Antenna Analyzer VHF/220 MHz 100-160 KHz 280-520 KHz .53-230 MHz - Replaces MFJ-259C

  • ame great performance as the popular MFJ-259C, but with two additional frequency ranges (100-160KHz and 280-520KHz).
  • Large easy-to-read two line LCD screen and side-by-side analog meters clearly display your information. Super easy to use! Just set the bandswitch and....
  • Use 10 AA or Ni-MH batteries (not included) or 110 VAC with optional MFJ-1312D (not included).
  • Adjust your Yagi, quad, loop and other antennas, change antenna spacing and height and watch SWR, resistance and reactance change instantly. You’ll....
  • Complete ham radio test station with frequency counter, RF signal generator, SWR/Resistance/Reactance/Coax Analyzer, Capacitance/Inductance Meter and....
Check Stock