Top Frame Mounting Bracket Reviews

ZXFOOG Front License Plate Mounting Kit- Front Bumper License Plate Bracket & Black Silicone Car Tag Frame, Universal No Drilling Hole Adapter for Vehicle/Truck/Trailer, Screws Caps, Rattle Proof Pad

  • FRONT LICENSE PLATE BRACKET- Perfect for those cars with no pre-drilled holes or only 2 pre-drilled holes in the front bumper, Relocate the license plate with no drilling & no modifications required. The plastic front license plate adapter is ideal for vehicles with contoured bumpers, mounting front license plate to a trailer or adding an additional novelty plate to any vehicle, or as a spacer recessed into the license plate area at the rear of the vehicle.
  • SILICONE LICENSE PLATE FRAME- Black tag frame uses high-quality industrial grade silicone material, Heavy duty license plate frame can be durable, soft and tough. Rust proof, corrosion proof, weather proof, rattle proof, make your car license plate better protected. 5 drainage holes are designed on the bottom and sides of the silicone frame, to release rain and dust. 4 hole frame can Install firmly.
  • FOR UNIVERSAL FRONT LICENSE PLATE- front plate holder adjuster and frame combo are designed to fit all 6x12 inch standard /novelty plates. The slim frame design will not block the registration sticker on the license plate, so they're legal to be on road and you will not be chased by traffic police. Comes in 1 set for the front bumper or back trunk of your car tag. 3 types of frames available: stainless s....
Check Stock

CELESTION V-Type Guitar Speaker (T5906)

  • L-type horizontal mounting bracket, you can install single-tube preamp, two tubes Preamp, three tubes Preamp..
  • The surface of the bracket is spray-painted in silver gray for a more beautiful appearance..
  • The opening diameter of the 3 tube sockets is 19mm, The distance between the sockets is increased in order to facilitate the installation of some larger enthusiast RC components..
  • Frame size: 150x60x25mm / 5.9x2.36x0.98 inch..
  • Package Includes: 1pc Large L-type Mounting Bracket, 2pcs Small L-type Bracket, 3pcs Silver Plated Small 9-pin Tube Sockets, 16sets 3*8mm Mounting Screws (Not contain tubes and other parts)..
Check Stock

StarTech.com 6U Wall Mount Network Rack - 14 Inch Deep (Low Profile) - 19\ Patch Panel Bracket for Shallow Server and IT Equipment, Network Switches - 44lbs/20kg Weight Capacity, Black (WALLMOUNT6)

  • 6U WALL MOUNT RACK: This 6U 35cm deep wall mounting bracket has an open frame, 2 post design with a maximum mounting depth of 35 cm [13.78 in.] and a maximum weight capacity of 19.9kg [44.2lb].
  • EASY TO INSTALL: The 6U wall mounting bracket ships fully assembled and comes complete with M6 Screws and M6 Cage Nuts for easier installation, to save you the hassle of sourcing separate mounting hardware.
  • COLD-ROLLED STEEL CONSTRUCTION: Made of sturdy cold rolled steel, you can rely on this mounting bracket to keep your network equipment safe and sound. This bracket is perfect in areas where space is at a premium.
  • OPTIMIZE STORAGE SPACE: The 6U wall mounting bracket delivers a dependable equipment storage option, allowing you to wall mount equipment for a more efficient and accessible operating environment.
Check Stock

Universal Winch Mount Bracket, Heavy Duty Right Angle Mounting Winch Bracket, 5MM / 3/16INCH Thickness Solid Steel Hand Winch Bracket Winch Mounting Plate for Trailers, ATV, Trucks and Vehicle

  • 【HEAVY DUTY HAND WINCH BRACKET】The mounting winch bracket is constructed of 5MM steel, solid and build to last, ideal for using with 600lbs to 3500lbs hand winches.
  • 【UNIVERSAL MOUNTING WINCH BRACKET】Mounting Plate Size: 7”x4.3”x4.3”(LxWxH).
  • Please check the size information carefully before purchase (The second picture shows specific size).
  • 【BLACK COATED WINCH MOUNTING PLATE】The hand winch mounting plate has a black powder coated for supreme durability and weather resistant.
  • 【WIDE APPLICATIONS】The right-angle winch bracket is designed for using in securing the hand operated winch to building or vehicle frame, perfect for boat trailer, ATV, trucks, and any other vehicle.
  • 【100% SATISFACTION GUARANTEE】Your satisfaction means a lot for us.
  • Order the Angle-Mounting Winch Bracket with confidence! Click on the ""Add To Cart"" Button NOW!".
Check Stock

Front License Plate Mounting Kit- Stainless Steel License Plate Frame and Universal Bracket for No Drilling Hole Front Bumper, Car Tag Cover Adapter with Screws, Chrome Caps, Rattle Proof Pads

  • Universal Front License Plate Bracket- The black license plate adapter bracket is made of ABS hard plastic, with multiple mounting holes, is ideal for vehicles with contoured bumpers, mounting front license plate to a trailer or adding an additional novelty plate to any vehicle. Perfect for those cars with no pre-drilled holes or only 2 pre-drilled holes in the front bumper, Relocate the license plate with no drilling & no modifications required..
  • Heavy-Duty Metal License Plate Frame- The metal frame is made of high-quality stainless steel, with a smooth and high gloss surface. 1.6mm thickness, strong and durable, suitable for use in various environments and climates, and it protects the license plate rust proof. Mirror polished surface, no coating, no need to worry about fading and aging, with Chrome Screw Cap, the high-gloss frame keeps your license plate cool and sparkling.
  • Slim Frame For Universal US License Plate- license plate holder bracket combo is designed to fit all standard 6x12 inch novelty/license plates. It fits most standard size US license plates. Thin edges will not obscure the registration label on the license plate to ensure that the street is legal. Comes in 1 set for the front bumper or back trunk of your car license plate.
Check Stock

Hotop Blind Brackets Low Profile Box Mounting Bracket for Window Blinds White

  • Package includes: 6 pieces (3 sets) blind brackets in white, each set has left and right mounting bracket, which can be installed in one blind stand,....
  • Size information: the low profile box mounting bracket is 2 2/1 inch in width, 1 3/4 inch in height and 1 inch in depth, suitable for headrail that....
  • Durable material: box mounting brackets are made of iron, durable and sturdy, not easy to break or deform, and can be applied for a long time.
  • White color: classic, concise and generous, it can match with the curtain of a variety of styles and household adornment.
  • Application occasions: the low profile box mounting bracket can be installed on the top of the blind frame, the side or the back of the window casing,....
Check Stock

Slide-Co 16449 Closet Door Roller with 7/8 inch Nylon Wheel

  • Used by Acme, Stanley and a variety of other wardrobe door manufacturers.
  • Adjustable 2 piece top mounted bracket assembly.
  • Stamped steel bracket with nylon roller assembly.
  • Can act as corner bracket for steel frame by-passing doors.
  • Fits older Acme steel frame wardrobe doors.
Check Stock

JHR-AUTO Trailer License Plate Bracket- Truck/RVs/Boats/Jet Ski Rubber Car Tag Holder and Black Silicone Frame, Universal Adjustable License Plate Mounting Kit with Stainless Steel Screw Cap

  • BOAT TRAILER LICENSE PLATE HOLDER- Rubber license plate mounting kit is designed for replacing your Plastic license plate bracket or Aluminum license plate bracket, soft and tough, heavy-duty, prevent damage and loss of your Truck/Trailer/RV license plate, make the license plate light bracket last longer. This product was specifically designed for Boat, PWC, Snowmobile, ATV, Utility trailers and RVs.
  • RUBBER LICENSE PLATE BRACKET- This product is made from premium tough, high tensile, multiply fabric reinforced thick neoprene rubber, Replaces flimsy plastic, rigid steel and aluminum holders. Flexible, durable, corrosion-proof, tear-proof, fatigue-proof, cold temperatures, good UV resistance and long-lasting.
  • SILICONE LICENSE PLATE FRAME- The black rustproof / rattleproof car tag frame uses industrial-grade silicone material, Heavy-duty, durable, soft and tough, can withstand extremely high and low temperatures. The flexible material protects your vehicle from license plate rattle and scratching. 5 drainage holes are designed on the bottom of the silicone plate frame, to release rain and dust.
  • EASY TO INSTALL- The slim frame is suitable for all 12 x 6 inch standard plates in the United States/Canada. Thin edge design, Will not cover the registration ....
Check Stock

Bell AirStrike Mini Frame Pump

  • Pumps high volume for short barrel pump and compact head attached easily to all valve stems.
  • Ergonomic, pivoting handle provides great pumping grip.
  • Ball needle stored in the mounting bracket.
  • Convertible head changes to fit schrader and presta valves.
Check Stock

Ronin Factory Bed Frame Brackets Adapter for Headboard Extra Heavy Duty, Set of 2 Brackets with Hardware Modification Plate

  • UNIVERSAL FIT for attaching a metal bed frame to headboard that is not the same width. Please see images to understand what this product can be used for..
  • 25% THICKER STEEL than other brands! 0.10" thick for more headboard stability!.
  • EASY TO ASSEMBLE, Bed Frame Bracket instructions included with product. Offset mounting design of bracket allows a wide range of headboard widths to fit your frame..
  • NO HASSLE RETURNS! Return anytime with no questions asked. Please notice that these also work well with our 711 Hook Brackets as shown in the product image..
  • All hardware is included. Product includes 2 brackets and hardware to install frame bracket to bed frame. You can purchase 2 of these items if you also need to attach the footboard to the frame..
Check Stock

How To Build Monkey Bars (On The Cheap)

  • The newest swing set bracket in the easy 1-2-3 A-frame bracket series features a 90 degree angle that allows you to extend any A-frame play set!.
  • Heavy-duty 90 degree swing set bracket features a solid, one-piece design that is open on both ends and Constructed with heavy-duty steel with welded seems for the strongest and Safest construction.
  • Swing set brackets are finished in a power-coated Green color and Eastern Jungle Gym signature yellow tag to ensure 100% Authenticity and our Warranty.
  • this listing is for one bracket with hardware.
  • Mounting hardware is included (16 5/16" x 3" zinc-coated steel lag bolts and 16 washers).
Check Stock

Universal Footboard Extension Brackets, Bed Frame Extenders for Footboard, Headboard Brackets Attachment Kit for Metal Bed Frame, Fit for Twin, Full, Queen, or King Size Beds.

  • 【Function】:This universal footboard extension bracket attachment is compatible with the universal bed frame、twin、full、queen and king size bed frame，and low-profile adjustable bed frames..
  • 【Easy to Install】:You can easily attach a bed frame extenders to a headboard-only bed frame for extra length by using our supplied hardware kit, and the bracket offset mounting design allows for a wide range of headboard widths to fit your frame..
  • 【Friendly Reminder】:The bed frame hardware requires your bed frame to have two pre-drilled holes at the end of the footboard for installation. If your bed frame does not have holes or does not match the holes in the extension rails, you may need to drill "1/4" holes in the bed frame for mounting. Please measure the size of the bed frame in advance to avoid improper installation before purchasing..
  • 【Durable】：The footboard bed frame brackets are 25% thicker steel than other brands，Provides extra secure connections, reducing shifting and squeaking..
  • 【Measure】：Bed extension rails made with 12 Gauge steel and powder coated，Footboard brackets made with 14 Gauge steel,2.5mm thick for more headboard stability..
Check Stock

Beasteel Gasoline Container Lock Mount, Oil Mounting Bracket, Gas Tank Holder for Off-Road Motorcycle SUV ATV Truck Cars Gallon Can Fixing Device 2PCS

  • The fuel tank mounting bracket is well made of Advanced Engineering Plastics and Metals. Can fix the oil drum, help vibration dampening and effectively extending the service life of the fuel tank..
  • Advantage: The fuel tank bracket lock is fit for Beasteel 2 gallon fuel tank, can be detached for storage, saving space. Using these sturdy mounting brackets help fuel tank stay steady. It is mountable in different locations. More convenient and cheaper than the fuel tank bracket shelf..
  • Widely used: Fuel tank with the bracket can be used to hold water, gasoline, diesel, fuel oil, etc., Suitable for all cars, trucks, motorcycles ATV SUV and boats. Store extra gas for emergency, just need to be fixed on the pole frame, will not fall down which provide you with a safe driving environment and help you save space..
  • Convenient to use: With the help of a fixed frame, the fuel tank can be fixed on the back and side of the motorcycle. Can also be fixed on the luggage rack of the car or anywhere with a steel frame. Easy to install and remove. You can install it in different locations according to your needs..
  • Package Include: 2 Fuel Tank Mount Locks. You could buy it at the same time as Beasteel gasoline fuel tank. If it is another brand fuel tank, please confirm ....
Check Stock