Top Fpga Prototyping Reviews

krtkl piSmasher snickerdoodle Baseboard – Single-Board Computer with HDMI in/Out, Dual Gigabit Ethernet, Audio Line in/Out/Headset, 4X USB 2.0, 25 I/O, and JTAG

  • snickerdoodle Single-Board-Computer Baseboard.
  • HDMI Type A Input and Output up to WUXGA (1920 x 1200p) at 60Hz and 8-ch., 32-bit/192kHz HDMI Audio.
  • Dual FPGA-Connected Gigabit Ethernet RJ45 Jacks with PHY Support for Time-Sensitive Networking (TSN).
  • Stereo Audio Line Input, Output, and Headset (Mono Mic) via 3.5mm Jack with Dedicated 96kHz CODEC.
  • Four USB 2.0 Hi-Speed Standard-A Host Receptacles, 25 Reconfigurable FPGA I/O Pins, Xilinx JTAG.
Check Stock

KEYESTUDIO MEGA Sensor Shield V1 for Arduino MEGA R3 2560 Prototype Board Projects

  • Nice Sensor shield of MEGA Rev3, Easy prototyping and Very convenient especially for 3PIN (G V S) connections. There are tons of ground and VCC headers making really it easy to connect various Arduino modules and sensors with DuPont style cables..
  • This sensor shield board really simplify the circuit and easily connect commonly used sensors.The board is having digital and analog interface, Bluetooth module communication interface, SD Card module communication interface, APC 220 radio frequency module interface, etc..
  • This sensor shield allows ease development and prototyping and makes convenient way to connect many external devices/sensors..
  • This board works well for prototyping or certain permanent applications and a very handy companion to an Mega Rev3 or compatible board..
  • 100% Compatible with the programming software for Arduino. Excellent shield board in good quality and packaged in a nice box! Great for all kinds of scientific experiment research for Arduino.
Check Stock

GenBasic 40 Piece Male to Female 4 Inch Solderless Ribbon Dupont-Compatible Jumper Wires for Breadboard Prototyping

  • Male to Female AWG 26 Solderless Ribbon Jumper Wires for Breadboard Prototyping.
  • 40 x 10cm (4 Inches) Parallel Adjoined Wires.
  • Color Coded with 10 Colors and 4 Wires of the Same Color in Each Length.
  • Insulated Wire Casing with 2.54 mm Pitch DuPont-Compatible Connectors.
  • For Use in Development and Prototyping with Arduino, Raspberry Pi, Single Board Computers, LoveRPi Kits, and more.
Check Stock

GenBasic 80 Piece Male to Female 4 and 8 Inch Solderless Ribbon Dupont-Compatible Jumper Wires for Breadboard Prototyping

  • Male to Female AWG 26 Solderless Ribbon Jumper Wires for Breadboard Prototyping.
  • 40 x 10cm (4 Inches) and 40 x 20cm (8 Inches) for 80 Total Wires.
  • Color Coded with 10 Colors and 4 Wires of the Same Color in Each Length.
  • Insulated Wire Casing with 2.54 mm Pitch DuPont-Compatible Connectors.
  • For Use in Development and Prototyping with Arduino, Raspberry Pi, Single Board Computers, LoveRPi Kits, and more.
Check Stock

REXQualis 840 Pieces Breadboard Jumper Wire Kit with 14 Lengths Assorted Jumper Wire for Breadboard Prototyping Solder Circuits

  • Package Includes: Contains 840 pieces U shape preformed breadboard jumper wires, 6 individual clamshell containers each holding 140 pieces jumper....
  • 14 Different Lengths: 2 mm, 5 mm, 7 mm, 10 mm, 12 mm, 15 mm, 17 mm, 20 mm, 22 mm, 25 mm, 50 mm, 75 mm, 100 mm, 125 mm, meet your various experimental....
  • Easy to Use: Each jumper has stripped ends and preformed right-angled leads for easy insertion into your breadboard, make prototyping on a breadboard....
  • Wide Application: with variety of sizes and color design, these breadboards wires are ideal for use with any breadboard, prototyping, prototype....
  • We have always cared about the customer experience and improve the product function details, and also provide quick-responding technical support..
Check Stock

Jameco Valuepro 830-Point Solderless Breadboard 6.5 x 2.125 0.1 spread Ideal for Prototyping and Classroom Projects - WBU-202-R

  • Prototyping made easy: A reusable construction base for prototyping of electronics. Also commonly referred to as a plugboard or terminal array board..
  • Easy Identification: Pins are identified by numnbered rows and columns making working more efficient and less stressful..
  • 0.1 inch spread: The holes in this breadboard are spaced 0.1" which is the most common spacing for breadboards to accommodate standard DIP components..
  • Suited for analog and low frequency circuitry: The breadboard has strips of metal sockets which run underneath the board, yellow rectangles, and....
  • Educational environment: Ideal for STEM projects and classroom atmospheres as it promotes learning and testing. Ideal for high frequency and low noise....
Check Stock

Jameco Valuepro 3220-Point Solderless Breadboard 7.3 L x 7.5 W 0.1 Spread Ideal for Prototyping and Classroom Projects - WBU-208-R

  • Prototyping made easy: A reusable construction base for prototyping of electronics. Also commonly referred to as a plugboard or terminal array board..
  • Easy Identification: Pins are identified by numnbered rows and columns making working more efficient and less stressful..
  • 0.1 inch spread: The holes in this breadboard are spaced 0.1" which is the most common spacing for breadboards to accommodate standard DIP components..
  • Suited for analog and low frequency circuitry: The breadboard has strips of metal sockets which run underneath the board, yellow rectangles, and....
  • Educational environment: Ideal for STEM projects and classroom atmospheres as it promotes learning and testing. Ideal for high frequency and low noise....
Check Stock

Jameco Valuepro 2390-Point Solderless Breadboard 6.9 L x 5.8 W 0.1 spread Ideal for Prototyping and Classroom Projects - WBU-206-R

  • Prototyping made easy: A reusable construction base for prototyping of electronics. Also commonly referred to as a plugboard or terminal array board..
  • Easy Identification: Pins are identified by numnbered rows and columns making working more efficient and less stressful..
  • 0.1 inch spread: The holes in this breadboard are spaced 0.1" which is the most common spacing for breadboards to accommodate standard DIP components..
  • Suited for analog and low frequency circuitry: The breadboard has strips of metal sockets which run underneath the board, yellow rectangles, and....
  • Educational environment: Ideal for STEM projects and classroom atmospheres as it promotes learning and testing. Ideal for high frequency and low noise....
Check Stock

Audio Money (Mixed)

  • 96kHz XCVI FPGA core, less than 0.7ms Latency with all processing enabled.
  • 48 Input channels, 12 Stereo mixes + LR, 3 Stereo Matrix.
  • 16 onboard preamps, 17 faders, Rackmountable 19-inch, 8 SoftKeys.
  • Access to DEEP plug-ins, Automatic Mic Mixing, 8 Stereo FX engines + dedicated returns.
  • I/O Port for expansion and system compatibility, AES and XLR outputs, 7” capacitive touchscreen.
Check Stock

N8 PRO

  • Multi slot save states. 100 independent slots for save states.
  • Wide support of file systems: FAT16/FAT32/EXFAT.
  • Real time clock for logging date and time of saves.
  • 16MB of ROM memory. 8MB for PRG and 8MB for CHR.
Check Stock

JAMECO VALUEPRO - WBU-204-R Jameco Valuepro 1660-Point Solderless Breadboard 6.5 L x 4.3 W 0.1 spread Ideal for Prototyping and Classroom Projects - 20774

  • Prototyping made easy: A reusable construction base for prototyping of electronics. Also commonly referred to as a plugboard or terminal array board..
  • Easy Identification: Pins are identified by numnbered rows and columns making working more efficient and less stressful..
  • 0.1 inch spread: The holes in this breadboard are spaced 0.1" which is the most common spacing for breadboards to accommodate standard DIP components..
  • Suited for analog and low frequency circuitry: The breadboard has strips of metal sockets which run underneath the board, yellow rectangles, and....
  • Educational environment: Ideal for STEM projects and classroom atmospheres as it promotes learning and testing..
Check Stock

KEYESTUDIO MEGA Prototype Shield V3 Board for Arduino Mega, with 170 Points Breadboard Solderable, Easy to Use, Great for Prototyping Circuit Building Projects

  • Keyestudio MEGA ProtoShield makes it easy to design circuits and solder electronics. All the pads are tinned and easy to solder to..
  • The extra GPIO pin header on the right side is left empty making easier to install one according to the user's preference..
  • Be able to attach a Mini breadboard to make various circuit experiments. You can weld elements on the shield's prototyping area or connect circuits with tiny breadboard..
  • Better than most Arduino proto shields. It would be the best choice for you to use with Arduino MEGA controllers for either solder projects or prototyping..
  • MEGA Protoshield V3 for Arduino with mini breadboard are in good quality and well packed. Nice yellow on black color scheme..
Check Stock

RME ADI-2 DAC FS Ultra-Fidelity PCM/DSD DA Converter with AKG K240 Studio Pro Headphones & 10-Pack Straps Bundle

  • ...91 DAC Chips ▶️ The GUSTARD A26 DAC combines two AK4499EX DAC chips with one AK4191 modulator from Asahi Kasei Microdevices. With independent power supply and grounding for each channel, separate digital-analog architecture eliminates interferences from the beginning..
  • FPGA Exclusive Technology & Streamer / Renderer ▶️ Adopting FPGA exclusive technology, the A26 features signal routing, clock management, 2rd order PLL, DOP decoding, and Depop for PCM & DSD. Besides, utilizing Streamer/Renderer, an easy access to high-quality online streams, the GUSTARD A26 can supports Roon /UPnP /HQ Player NAA at present, and there will be more protocols in the future..
  • Clock Synthetization & XMOS XU216 Solution ▶️ Equipped with K2, ultra-low noise clock synthesizer, the A26 DAC features a precision clock from local oscillators or external clock in. It is worth mentioning that the GUSTARD A26 can replace the input signal' s clock with precision oscillators (local or external) and avoid the interference from the input source' s clock. In addition, the A26 DAC applies XU216 from XMOS, supporting up to PCM768 (with MQA-support) and DSD512..
Check Stock