Top Forging Crankshaft Reviews

Cam Phaser Locking Tool and Crankshaft Positioning Tool Crankshaft Wrench Holder Fit for Ford 1993 4.2L/4.6L 2-valve,4.6L 4-valve 5.4L/6.8L V8 Similar to Rotunda 303-448,T93P-6303-A,6024&525219

FITMENT(Crankshaft Positioning Tool):1993 and newer 4.2L/4.6L 2-valve engines,4.6L 4-valve and 5.4L and 6.8L V-8 engines..
FITMENT(Cam Phaser Locking Tool):Expedition 5.4L 3V 2005-2011.
F-250/350/450/550 5.4L 3V 2005-2009.Mark LT 5.4L 3V 2006-2008.
Mountaineer 4.6L 3V 2006-2010.Mustang 4.6L 3V 2005-2010.
Navigator 5.4L 3V 2005-2012.Similar to Rotunda 303-448,6024,525219..
MATERIAL And DESIGN(Cam Phaser Locking Tool):Hardened chrome molybdenum steel,resistance on rust,deformation and crack.Designed with a triangle shape with four holes to perfectly fits for your cam phaser.It is a quite available accessory to make you do the phaser job with ease..
USAGE(Crankshaft Positioning Tool):This tool slides easily over the crankshaft and seamlessly locks into place with the Wood ruff key.You only need to rotate the crankshaft with tool attached to crank so that the slot in the handle locks into the engine cover alignment dowel pin,ensuring the engine is at the correct TDC point avoiding extreme damage and costly repairs..
CORRECT INSTALLATION POSITION(Crankshaft Positioning Tool):Easily installs over the crankshaft and engine front cover alignment dowel to position the crankshaft at top-dead-center..

Check Stock

2009-2018 Subaru WRX STi Nitride Treated Hardened Crankshaft EJ257 2.5L 12200AA430 OEM GENUINE

【Compatible】The crankshaft rear main seal & wear sleeve installer & remover tool kit compatible with Cummins ISX QSX ISX15 ISX12 diesel engines. Replaces OEM 3164780 3162994. Replace multiple seals including 4965569..
【Features】Designed for easy removal and correct installation of the crankshaft rear seal and wear ring/sleeve on diesel engines..
【Advantage】This crankshaft rear main seal & wear sleeve installer & remover tool kit helps reduce the risk of damage to the crankshaft seal surface during disassembly. In addition, the rear seal and wear ring will be automatically installed to the appropriate depth using this special tool 3164780 to prevent damage to the rear seal and leakage..
【Quality】The crankshaft rear main seal & wear sleeve installer & remover tool kit is manufactured by an ISO-certified manufacturer, made of high-quality materials, and meets or exceeds OEM requirements. 100% factory tested, and durable..
【Warranty】2 years warranty for the The upper gimbal steering arm shaft kit! When you have any questions about our products, please feel free to contact us, we will provide the best service..

Check Stock

Engine Crankshaft - 4-Stroke Engine Crankshaft 110cc for ATVs Dirt Bikes Pocket Bikes Scooter Accessory Simple installation

Fits GM LS1, LS2, LS3, LS6, LS7, L92 To: Pre-1997 TH350, TH400, 700-R4, 4L60, 4L60E, 4L85E.
Package Includes: 1 x LS Crankshaft Spacer, 6 x Crankshaft Spacer Bolts..
Note : 1. WILL NOT FIT 4L80E transmission or 1999-2000 6.0 liter engine with long snout crankshaft.
2. Required when used with automatic transmission built before 1997， Ensures Proper Clearance Between Crankshaft and Converte.
1 Year Unlimited-mileage Quality Guarantee.

Check Stock

ACDelco Gold 710506 Crankshaft Front Oil Seal

Removal and installation tool for front crankshaft seal and wear sleeve on Cummins Signature, ISX & QSX，ISX12 and ISX15 engine.
Crankshaft rear seal remover and installer replace for OEM# 4918991 tool.
Fit for the newest Cummins seal and sleeve perfectly.
Remove and install front crankshaft seal easily and without damage.
Made of high quality steel and black finish.

Check Stock

ATP 50mm Cranks Crankshaft Pulley Removal Wrench Holder Tool Remover and Installer Socket Wrench Removal Holding Spanner kit Compatible with Honda and Acura Engines

Premium Quality: The remover and installer socket wrench is designed with hardened chrome molybdenum steel construction, coated with black paint which prevention corrosion, heavy duty sturdy and durable..
Specifications: The 50mm crankshaft crank pulley wrench holder tool is of 2.2 inches by 5.8 inches by 5.9 inches, weight 1.3-pounds..
Hexagonal Shape Design: This crankshaft crank pulley removal tool is designed with a hexagonal shape with a hole in the center of the tool, that allows the use of a socket and extension to help loosen or tighten the pulley bolt..
Great Function: The 50mm cranks crankshaft pulley removal wrench holder tool is used to maintain the harmonic damper pulley position while removing/installing the pulley bolt and prevent it from rotaing as you install or remove many Acura and Honda engine crank bolts..
Great Compayibility: This crankshaft crank pulley removal tool adopts small compact and center hollow design, the crankshaft pulley wrench gets into tight engine spaces easily when servicing the engine and powertrain, fits for most Honda and Acura engines..

Check Stock

OCPTY OCPTY Harmonic Balancer Crankshaft Belt Drive Pulley Fit For 2005-2007 2010 for Scion tC 2008-2015 for Scion xB 2009-2013 for Toyota Matrix 2001-2008 for Toyota RAV4 2002-2008 for Toyota Solara

COMPATIBLE MODELS - Fit 2007 2008 2009 2010 2011 2012 2013 Nissan Altima, 2007 2008 2009 2010 2011 2012 Nissan Sentra.
PART NUMBERS - Replace for 1340700H010 1347028020 134700H010 594-198 number crankshaft pulley harmonic balancer.
PRODUCT DETAILS - The crankshaft pulley is one of the key functional components on the gasoline engine, which is installed on the front end of the crankshaft and rotates with the crankshaft. It is to drive the power source of other engine accessories, relying on the transmission belt to drive generators, pumps, booster pumps, compressors and other operations.
REPLACE ADVANTAGES - Manufactured to OE design ensuring each balancer will install properly and function as intended.Dynamically balanced for proper absorption of the crankshaft vibrations.
PLEASE NOTE - Please check car make model trim engine,product appearance and part number to make sure this is the right part you need.Any question you have please contact us for a answer.

Check Stock

Crank Shaft Sleeve Adapter， 7/8" to 1" inch Gas Engine Pulley Crank Shaft Sleeve Adapter with Step Key Steel Silver 7/8 to 1 inch shaft adapter with clutch 7/8 centrifugal clutch crankshaft sleeve 7/8

...cessed and rolled, which has greater strength, toughness and durability, strong wear resistance, not easy to rust and deform, reliable quality, and can be used stably for a long time. for 7/8 to 1 shaft adapter 7/8 to 1 inch shaft adapter with clutch.
STRONG COMPATIBILITY: Crankshaft sleeve adapters are equipped with different sizes of adapters, which have a wide range of applications and can meet your various needs. Please confirm whether the product is Replacement before placing an order. for 7/7" to 25mm shaft adapter 7/8 centrifugal clutch.
PROFESSIONAL USE: The crankshaft sleeve adapter allows you to use the old clutch or pulley on the new engine, you may need to use a small hammer to gently tap it into place to make it Replacement tightly for 7/8 blade pulley crankshaft sleeve 7/8 to 1 in.
EASY TO INSTALL: Contains an adapter and keyway, the wider part of the key is located in the adapter. The installation is very simple and can be completed in a few minutes. It is your ideal accessory. for 7/8 to 1 inch shaft adapter 7/8 to 1 crankshaft adapter.

Check Stock

ABN Long Reach Harmonic Balancer Installer Kit – 5 Piece Harmonic Balancer Pulley Puller Set Damper Puller Kit

PROTECT YOUR CRANKSHAFT FROM FAILURE: The ABN Long Reach Harmonic Balancer Installation Tool Pulley Set allows you to quickly and easily install replacement harmonic dampers into your vehicle.
A harmonic balancer protects your vehicle from damaging vibrations that can wear down the life of your crankshaft and protects your crankshaft threads from stripping, making it important to install the harmonic balancer with precision and accuracy.
FITS YOUR VEHICLE: Designed for use on many late Ford, GM, Dodge, and Chrysler vehicles with V8 and V6 engines.
Long reach thread sizes include M14x1.5, M12x1.75, M12x1.5, M16x2.0.
EASY TO USE: Attach the pressure bearing screw nut onto the chosen jack screw.
After guiding the replacement harmonic balancer onto crankshaft pin, thread the jack screw into the crankshaft and hand tighten the pressure bearing to the harmonic balancer.
Continue tightening system into place with hand wrench (not included) and remove installer assembly.
CONTENTS: Long reach harmonic puller tool includes a pressure bearing and screw nut assembly tool and 4 jack screws to fit a variety of vehicle sizes.
Constructed of heavy-duty metal materials for durability and longevity with a black oxide finish for resistance to....

Check Stock

Crankshaft, 69mm, Forged Chromoly, 8 Dowel, VW Journals, Compatible with Dune Buggy

Complete crankshaft, Connecting rods, Wrist pin bearings, Main bearings and seals sold separately for single-cylinder crankshaft.
Fits: Ranger 570 Crew EPS Full-Size 2015, 570 Crew Full-Size 2015, 570 EPS Full-Size 2015, 570 Full-Size 2015-2018, 570-6 Crew 2016-2017, Crew 570-6 2018, RZR 570 2012..
Meets or Exceeds OEM Specs for Fit and Performance.

Check Stock

Powerbuilt Crankshaft Crank Pulley Removal Tool 50mm Holder Remover and Installer Socket Wrench Honda and Acura - 648796

For removal and installation of crankshaft pulley bolt on most Honda and Acura engines.
Hexagonal shape fits hole in center of crankshaft pulley.
Prevents engine from turning when held with breaker bar.
Hole in center allows socket access to crankshaft pulley bolt.
Package includes usage instructions and photos.

Check Stock

CTCAUTO New Engine Crankshaft Replacement for 1984-1995 for Toyota 4Runner 1976-1985 for Toyota Celica Crankshaft Kit 13711-35050

❤️Compatible: Half Circle Crankshaft is especially designed fit for mini pocket bike 47cc 49cc. The size is about 44mm / 1.7inch, please confirm the original car size before buying..
❤️Easy to Install: Half Circle Crankshaft with easy installation. Based on the original factory specifications, a direct replacement for the old or broken one..
❤️Note： For detailed product parameters, refer to the instructions. Please confirm whether the product is suitable for your equipment before ordering, I wish you a happy life.
❤️High Quality: Engine Crankshaft is made of high quality alloy material, anti-corrosion and high strength for maximum durability. High quality material ensures stable performance and durability..
❤️Excellent Performance: Exquisite workmanship, stable performance and high reliability. High level of accuracy and sensitivity, enhance healthyty of your vehicle..

Check Stock

44mm / 1.7in Crankshaft Assembly Half Circle Crankshaft Engine Parts Replacement Accessories Fit for Mini Pocket Bike 47cc 49cc

Keyed Crankshaft 3/4 Inch 3/16 Inch Keyway.
This item will not work for GENERATORS or other engines that have a TAPERED Crankshaft.
Fitment:for Predator 212cc, For Honda GX200, Go Kart & mini bikes.

Check Stock

For Power stroke 6.7L Front and Rear Crankshaft Seal Installer Remover Master Set Fit for 2011-2021 Ford Super Duty Diesel F-250 F350 F-450 F-550 F-650 F-750 Alt to 303-1509 303-1514 303-1513 303-1510

Function -- This is a master tool set that can remove and install all the front and rear crankshaft seals. This professional tool set will absolutely save your time and energy to do the work. They are same or exceed the OEM function and quality..
Fitment -- Fits for 2011-2021 Ford Super Duty F-250 F-350 F-450 F550 equipped for Power Stroke Diesel 6.7L and 2016-2021 Ford Super Duty F-650 F-750 equipped for Power Stroke Diesel 6.7L..
Include -- 1 * 303-1509 & 303-1509-01 6.7L Front Crankshaft Seal Installer Tool Alt ST-137B. 1 * 303-1510 6.7L Front Crankshaft Seal Remover Alt ST-152. 1 * 303-1514 6.7L Rear Crankshaft Seal Installer Alt ST-138. 1 * 303-1513 6.7L Rear Crankshaft Seal Remover Alt ST-148..
Material -- Made of premium heavy-duty hard steel with black coated for rust and corrosion resistance, hardened construction for high strength and impact resistance, this tool is top quality and durability that can serve for a much longer time..
Satisfaction Guarantee -- Yoursme aims to provide excellent products and best service for customers. You can simply return it if you are not satisfied with the product. We support 30 days full refund for return and 12 month warranty..

Check Stock