Top Forged Steel Ball Valve Reviews

Kegco bf ebdck-nt Conversion Kit

  • .... The gauge on top of the regulator indicates CO2 pressure in the keg, while the gauge on the side indicates the remaining volume of CO2 gas. A pressure release valve is conveniently located on the body..
  • LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L "D" System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • DOOR MOUNT STAINLESS STEEL DRIP TRAY: Our 6" x 4" door mount drip tray's clean design, durable stainless steel construction, and attractive brushed finish have made it a favorite of beer lovers. Hassle-free from start to finish, this drip tray can be quickly and easily mounted using the two screw holes in the backsplash, and when you're done dispensing for the day, a removable grill makes clean-up a breeze. This drip tray does not have a drain, so it will need to be emptied manually..
  • CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished ....
Check Stock

Lead-Free Forged Brass Air Compressor In-Line Ball Shut Off Valve, Quarter Turn, 1/4\ Male NPT (MNPT) X 1/4\ Female NPT (FNPT) Qty: 1

  • Forged for added strength and durability. Forged brass is stronger and more expensive than cast brass..
  • For your health and safety, this fitting is made of lead-free brass which contains less than 0.25% lead. The ball inside the valve is made of chrome plated lead-free brass. Seal materials are PTFE plastic and NBR rubber..
  • 1/4" Male NPT (MNPT) X 1/4" Female NPT (FNPT) connections. High-capacity full-port design reduces pressure drop. Quarter-turn operation with a long handle makes this ball shut-off valve very easy to operate. Locknut resists loosening under vibration..
  • Suitable for compressed air, water, and oil. Able to control flow in either direction. Pressure rating: 200 psi..
Check Stock

STYDDI Stainless Steel High Pressure Washer Shut-Off Ball Valve Kit with 3/8' Quick Connect for Power Washer Hose, 4500 PSI

  • ...alve, a 3/8″ quick coupler plug, a 3/8″ quick coupler socket and teflon tape. The set up comes unassembled but it gets assembled very easily. The ball valve fit is designed in a manner to persist high pressures..
  • PREMIUM MATERIAL ENSURES HIGH QUALITY - The shut-off ball valve is made of premium quality stainless steel, housing with stainless steel handle and insert. Great quality stainless steel brings durability and long rust free service life. It can attain maximum working pressure of 4500 PSI and maximum working temperature of 158 degree Fahrenheit..
  • EASY TO USE - The design pattern of this pressure washer shut-off ball valve is constructed in a way that it can sustain high pressure working and provide good leverage under high pressure. The functioning working of this ball valve is very easy as it has quick connecting and disconnecting fitting. It is also easy to turn on and off..
  • SUPERIOR LEAK RESISTANCE - One of the great feature of this pressure washer ball valve is its great leak resistance with the teflon tape. With this leak free ball valve, it will definitely save your time and effort when pressure washing..
Check Stock

Kegco Standard Two Keg Door Mount Kegerator Beer Tap Conversion Kit with 5 lb. Co2 Tank

  • ...o display PSI and Co2 volume, and a large, easy-to-use pressure adjustment knob. Also included are a manual pressure release valve and an integral tamper-proof safety relief valve that releases at 45-psi..
  • LEVER HANDLE KEG COUPLERS: These NSF-approved Kegco KT85D-L D System Keg Couplers feature sturdy nickel-plated forged brass bodies with stainless steel probes, and are designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • TWO CHROME BEER FAUCETS WITH BRASS LEVERS: Featuring a forged brass body and highly polished chrome finish, these NSF-approved Kegco CFBL beer faucets put a stylish finishing touch on your kegerator at a price you’ll love. The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles..
  • STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank colla....
Check Stock

Hromee 18 Pieces Air Coupler and Plug Kit 1/4-Inch NPT Air Hose Fittings and Compressor Accessories with Universal Quick Coupler Brass Ball Valve Swivel Air Plug and Tee Pipe Fitting

  • ...vel body, preventing hose kinks and increasing mobility, great for air tools to reduce strain on wrist and air hose. Made of high-quality corrosion resistant zinc plated hardened steel, solid body for use of a longer life. The maximum operating pressure is 300 psi..
  • HEAVEY DUTY BALL VALVE - The ball valve is made of forged brass for corrosion resistance, ductility at high temperatures and low magnetic permeability. It has a plastic-covered lever handle for on/off manual control so can be used to give your tool full air flow to total shut-off. Designed for use on all pneumatic circuits and features a quick connect/disconnect positive seal..
  • TEE PIPE FITTING - The tee fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee. It has 2 x 1/4” female and 1 x 1/4” male for connecting pipes. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries..
  • CONNECTORS & ADAPTORS - The kit includes 4 x MNPT Plugs, 4 x FNPT Plugs, 2 x FNPT Couplers, 2 x MNPT Swivel Plugs, 1 x MNPT Coupler, 1 x Male Coupling, 1 x Ball Valve, 1 x Tee Brass Fitting, 1 x Thread Seal Tape, 1 x....
Check Stock

Kegco Standard Two Keg Door Mount Kegerator Beer Tap Conversion Kit

  • ...and Co2 volume, and a large, easy-to-use pressure adjustment knob. Also included are a manual pressure release valve and an integral tamper-proof safety relief valve that releases at 45-psi..
  • LEVER HANDLE KEG COUPLERS: These NSF-approved Kegco KT85D-L “D” System Keg Couplers feature sturdy nickel-plated forged brass bodies with stainless steel probes, and are designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • TWO CHROME BEER FAUCETS WITH BRASS LEVERS: Featuring a forged brass body and highly polished chrome finish, these NSF-approved Kegco CFBL beer faucets put a stylish finishing touch on your kegerator at a price you’ll love. The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles..
  • STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank colla....
Check Stock

MTM Hydro Ball Valve for Pressure Washer Gun, High Pressure Power Washer Shut Off Valve Stainless Steel 3/8” Female NPT 5000 PSI

  • PRESSURE WASHING BALL VALVE - Premium 3/8” Stainless Steel Ball Valve for pressure washer guns. 5000 PSI Max Pressure rating. Max Temp 250 degrees Fahrenheit..
  • STAINLESS STEEL - Ball valve pressure washer made from stainless steel, offering enhanced rust and corrosion resistance. Durable pressure washer accessories built for long-term use..
  • EASY SWITCHING - Power washing valve commonly found at the base of the high pressure washer gun. Enables quick shut off to switch between pressure washing guns without turning off the entire system..
  • HIGH QUALITY SEALS - High pressure ball valve with high quality PTFE (Polytetrafluoroethylene) seals for improved performance with high heat and chemicals..
  • LIGHTWEIGHT - Pressure washer shut off valve made from lightweight materials with a rounded frame. 3/8" Female NPT Inlet x 3/8" Female NPT Outlet..
Check Stock

Powerbuilt 20 Ton Bottle Jack with 9-11/16 inch to 17-5/8 inch lifting range, portable hydraulic car jack with carrying case- Red 640503

  • forged iron saddle with a lifting range of 9-11/16 in. to 17-5/8 in.
  • Forged steel saddle and cast handle socket for maximum height.
  • Pin style release valve for easy operation, extension screw provides added lift height and meets or exceeds ANSI standards.
  • Made to be the most reliable tools in the market today.
  • Extension screw provides added lift height.
Check Stock

Pacer Pumps SEB2PL E5.5 Multi-Purpose Water Transfer Pump with 2 Inch Inlet and Outlet

  • LCT Feature - Cast iron Cylinder liner, Viton Oil Seal, Dual ball bearings, Forged steel crankshaft and camshaft.
  • LCT Feature - Low Oil shut-off for extra protection.
  • LCT Feature - Meets Carb & EPA standards.
  • Molded & Assembled in the USA (Lancaster, PA).
Check Stock

Powerbuilt 648468 Tie Rod and Ball Joint Separator Silver 15/16 in.

  • For separating ball joint from steering knuckle.
  • Drop-forged, heat-treated alloy steel wedge tool.
  • Separates ball joint from steering knuckle.
Check Stock

3/4\ Ball Valve, 1 Pack Male NPT (MNPT) X Female NPT (FNPT) Thread,Stainless Steel Shut-Off Valve for Water,Oil and Gas (3/4 inch, 1 pack)

  • Ball Valve：Male NPT (MNPT) X Female NPT (FNPT) screw thread connections,1,000 WOG (PSI) full port heavy duty ball valve is made of 304 stainless steel,safer and stronger,anti-corrosion,long lifetime..
  • Good Sealing：KAPUNOS ball valve has two sealing surfaces with good sealing performance,it can achieve complete sealing..
  • Convenient Operation：KAPUNOS high pressure ball valve has a comfortable operating handle,which opens and closes quickly,It only needs to rotate 90° from fully open to fully closed, which is convenient for quick control. When the handle is parallel to the pipe body, it is in an open state, and when it is vertical, it is in a closed state, so it is more convenient to observe whether the valve is open..
  • Widely Used：Ball valves are widely used in gardens, water pumps, corner rainwater tanks, external taps, rainwater connections with buckets, rainwater collectors, water pipes, etc. Also can be used for mechanical equipment, industrial equipment, water supply and drainage equipment..
  • Suitable for Media：The high-quality 304 stainless steel ball valve is suitable for water, sea water, air, oil and steam media.Since the ball valve has wiping properties during opening and closing, it can be used in media with suspended solid particles..
Check Stock

Kegco HBK199S-2 Keg Dispenser

  • ...s you what's left in the CO2 tank, so you don't run out of gas during a party. The chrome plated brass body has a large pressure adjustment knob for easy use and includes a manual pressure release valve..
  • LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L "D" System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
  • CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished chrome finish, this NSF-approved Kegco CFBL beer faucet puts a stylish finishing touch on your kegerator at a price you'll love. The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles..
  • STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching y....
Check Stock

Curt 13591 56094 40004 45030 23504 Class 3 Trailer Hitch Tow Package with 2 Inch Ball for Equinox and Terrain

  • DEPENDABLE STRENGTH. This heavy-duty ball hitch is constructed from high-strength forged steel and is rated to tow up to 17,000 pounds gross trailer....
  • VERSATILE USE. This forged trailer hitch ball mount comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. The....
  • READY TO TOW. Hitching up your trailer is easy with this 2-inch ball mount. It features a 1-1/4-inch hole to accept a trailer hitch ball with a....
  • CORROSION-RESISTANT. For long-lasting use, this forged ball hitch is protected with a highly durable carbide black powder coat finish, easily....
  • EASY TO INSTALL. To install this class 5 hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The....
Check Stock