Top Forged Flat Bar Reviews

4LIFETIMELINES Economy Brake Line Flare Kit for Single, Double (SAE) Flares & Bubble (ISO) Flares - 2 Flaring Bars, 9 Flaring Dies, Tubing Reamer, & Storage Case

  • Creates single, double inverted (SAE) flares & bubble (ISO) flares up to 0.040″ wall thickness.
  • Designed to perform flares on thin wall steel, aluminum, copper, and nickel-copper tubing.
  • Includes flaring dies for sizes: 3/16″, 1/4″, 5/16″, 3/8″, 1/2″, 4.75mm, 6mm, 8mm, 10mm.
  • Self-centering yoke has corresponding slots to hold bar assembly tightly in place during flaring.
  • Contents Include: (1) SAE Forged Alloy Steel Flare Bar, (1) Metric Forged Alloy Steel Flare Bar, (1) Self Centering Premium Yoke, (10) Flare Die Heads, (1) Tubing Reamer 3mm-12mm, (1) Rigid Plastic Storage & Carrying Case.
Check Stock

PacTool RS501 Roof Snake Tool - Shingle Pry Bar - Heavy Duty Nail Remover Tool - Roof Shingle Remover - Professional Roofing Tools

  • COMMERCIAL CROWBAR: Replace old and worn-out composition roofing shingles in no time with our practical pry tool. Our roof snake makes removing and applying new shingles more accurate, efficient, and safer than traditional replacement methods..
  • ROOFING TOOLS AND EQUIPMENT: Never damage your roof again with this convenient pocket pry bar. Install new 3-tab shingles without bending or hitting surrounding shingles or accidentally striking your fingers with your hammer in the process..
  • HAND TOOLS: A must-have for all roofers, this tool is forged from high-strength steel and has a patented offset nail slot feature allowing you to align nails with the correct one-inch offset from the bottom edge of your current course..
  • NAIL PULLER TOOL: There is no need for a flat bar with this handy claw tip, Easily loosen and remove old, damaged shingles and nails by driving the claw end under the nail, rolling the nail out, and twisting the roof snake..
  • PACTOOL: Trusted for decades, we are the leaders in specialized construction, renovation, and remodeling designs. Our cutting-edge product line inspires craftspeople and DIYers to work smarter, measure better, and repair more efficiently..
Check Stock

Fiskars 751400-1001 Pro Wrecking bar 18"

  • Forged and machined head fro hammering and ramming.
Check Stock

QCAA Heavy Duty Solid Brass Barn Door Hook Latch & Eye, 4\

  • Hook Base: Heavy Duty Brass Construction, Well Riveted & Well Co2 Welding to Prevent Falling Out.
  • Unique Match: Bigger Hook Base with Elegant Eye Base.
Check Stock

Zephyr Pro-50 Eliminator 32 Ounce

  • 1 - Pro 25 Easy Kut "Forged Wheel Formula" 16oz.
  • 1 - Primary Cutting Tripoli Rouge Bar, 1 - Moss Green Rouge Bar.
  • 1 - Blue Moon Rouge Bar, 1 - 2" Tapered Goblet.
Check Stock

The Body in the Gravel (A Jazzi Zanders Mystery Book 3)

  • Point Chisel, Overall length 11inch/30cm, Forged construction for strength and durability.
  • Flat Chisel, Overall length 11inch/30cm, Blade Width 3cm, Multiple forged cold chisel with precision ground cutting edge.
  • Brick Chisel, Overall length 8inch/22cm, Blade Width 10cm, Hardened and tempered chisel blade suit for removing, cutting, breaking from brick, mason, tile, concrete etc.
  • Made of heat treated Cr-V Steel, Forged construction for strength and durability.
  • Mason chisel with thickness and wide handguard, prevent slipping and absorbs vibrations.
Check Stock

Mayhew 61366 Dominator Pry Bar Set Curved 5-Piece 3

  • Includes: 40150 1/2 x 12" Ladyfoot Bar, 40152 5/8 x 16" Ladyfoot Bar, 40154 3/4 x 21" Ladyfoot Bar.
  • Rocking head allows the operator to pry in tight spaces, while the pointed end is used for alignment.
  • The solid forged head is specially designed for ultimae strength when prying.
  • Black oxide finish provides additional rust protection.
Check Stock

Sugoi Steel Vikings Norse Raider Valhalla Battle Sword 1060 Spring Steel Functional

  • Overall Length: 39.25 Inches. Blade Length: 29.75 Inches. Blade Thickness: 5.5mm, Tapered, w Fuller. Blade Width: 2 Inches at Base..
  • Blade Style: Norse, One Handed Viking Sword. Blade Material: 1060 Carbon Spring Steel, Hand Forged, Fully Functional. Blade Sharpness: Introductory....
  • Tang: Full Tang, 6.5 Inches, Forged to Pommel. Hilt: 1060 Steel, 7 Inches Wide, 21mm Thick..
  • Handle Length: 3.625 Inches. Handle: Hardwood, Cord Wrap, Black..
  • Pommel: 1060 Steel, Forged to Tang, 2 Inches Long. Scabbard: Hardwood, Flat Black Finish, Aluminum End Fittings..
Check Stock

Mayhew Tools - MA60150 60150 3-Piece Ladyfoot Bar Set Black

  • Includes: 40150 1/2 x 12" Ladyfoot Bar, 40152 5/8 x 16" Ladyfoot Bar, 40154 3/4 x 21" Ladyfoot Bar.
  • Rocking head allows the operator to pry in tight spaces, while the pointed end is used for alignment.
  • The solid forged head is specially designed for ultimae strength when prying.
  • Black oxide finish provides additional rust protection.
Check Stock

Emeril Lagasse 9-Piece Forged Cutlery Knife Block Set - Emeril Lagasse Cutlery Set - Perfect Kitchen Knives for Produce, Meat, and Bread

  • Forged vs Stamped – A forged knife is made out of a single bar of steel that is hammered into shape by an expert craftsman. On the other hand a stamped knife is cut out from a sheet of steel and heated by a machine. While stamped knives are the cheaper option, they cannot compare to the quality and efficiency of forged knives..
  • Chef’s Professional Quality Kitchen Knives – This Emeril Lagasse knife set is made with superior stainless steel for a super sharp cutting edge. Cut effortlessly through tough fruit, thick meats, and dense vegetables. Having a well-equipped kitchen will make cooking more enjoyable and efficient..
  • Durable & Safe 9-Piece Set – Comes with 8″ Chef Knife, 8″ Serrated Bread Knife, 7″ Santoku Knife with Cullens, 7.75″ Slicer Knife, 5.5″ Prep Knife, 5″ Utility Knife, 3.5″ Paring Knife, Kitchen Scissors, & Round Rubberwood Block..
  • Quality is King – Forged knives are made with time and care and it shows in their outstanding quality. Forged knives are more comfortable, more efficient, and overall higher quality than stamped knives. Additionally, forged knives have higher blade retention than stamped knives so you can keep your knives sharp longer..
  • Easy Hand Wash – As with most high-end, sharp silverware, do no....
Check Stock

6-Inch Swivel Bench Vises,Heavy Duty Metal Milling Locking 360-Degree Swivel Work Bench Base 150mm Jaw Table Top Clamp Press Swivel Base

  • Sturdy and Durable - 6" Bench Vise has a cast iron body with steel U-channel bar for durability and has a flat portion that acts as an anvil and additional work surface,with 6" wide machinist jaws ,Maximum jaws opening: 5.9" ,Anvil Work-Surface 4.0"x 3.74" ,Machined 'T' Bar 7.5",Overall Dimensions: 6.9"(H)×13.4"(W),The base Installation distance 4.5"x 4.5"x 6.5".
  • Large Anvil Work Surface - This large work surface is machined smooth and designed for metal shaping or bending. Made from forged steel, this anvil work surface is more durable than work surfaces found on traditional cast iron vises..
  • Adjustable Direction - Rotate the table vise around its 360-degree swivel base and you can position your work in just the right spot. Once there, dual lock-down nuts keep it in place..
  • Strong Practicability - Power serrated steel jaws and clamps for great grip and strength，provides maximum clamping and holding power..
  • Widely Use - uyoyous workbench vice is perfect for home or business application, whether you are working with wood or metal, you just need to install it on the bench top or working truck and you can use it..
Check Stock

Biber Muller, Bearded Hewing Broad Axe - Right Bevel - Hand Forged in Austria

  • Hand forged in Austria for true quality, they offer a life-time warranty.
  • The hickory handle is 23-3/4" long, 3.1 lb head, the cutting edge is 7-1/8" long, and Includes an edge guard.
  • The edge features a single bevel on the righ hand side, and the blade is flat on the left hand side.
  • Please Note: These tools are hand forged and each individual tool is a little different, this means dimensions can vary a little.
  • Mueller Axes, have been hand forged in Austria, dating all the way back to the 1600's..
Check Stock

IRWIN Tin Snip, Flat Blade, 12-inch (22012)

  • Snip tool cuts up to 20-gauge cold-roll steel and 22-gauge stainless-steel.
  • Snip tool features a flat blade that cuts straight and wide curves.
  • Precision-ground edges on the tin snips ensure a tight grip on each cut for superior cutting quality.
  • Hot, drop-forged steel blades provide maximum strength and long life.
  • Durable spring washer holds blades tightly against each other when cutting.
Check Stock