Top Forged Component Reviews

CURT 45832 D-Ring Shackle Mount Trailer Hitch, Fits 2-Inch Receiver, 13,000 lbs

  • DEPENDABLE STRENGTH. This D-ring ball hitch is constructed from high-strength forged steel and rated for a straight-line pull of up to 13,000 pounds (limited to lowest-rated towing component).
  • VERSATILE USE. This forged trailer hitch ball mount with D-ring comes with a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver. The shackle features a threaded pin to remove if necessary.
  • READY TO TOW. Recovery towing is easy with this 2-inch shackle mount. It can be used for pulling another vehicle, stumps and other offroad applications.
  • CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, easily resisting damage from rain, dirt, snow, road salt and other corrosive threats.
  • EASY TO INSTALL. To install this D-ring hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank makes installation easy. Then, secure the shank with a hitch pin (sold separately).
Check Stock

MYCAN Trailer Hitch Ball Mount Forged Solid Steel Fits 2 1/2' Receiver Hitch Class 5 Hitch Ball Mount Towing 2' Drop, 1/2' Rise 20,000 lbs 1-1/4' Hole Commercial Duty MCFT252

  • Heavy Duty Forged Steel: MYCAN trailer hitch ball mount is constructed from high-strength solid forged steel and this hitch ball mount is rated to tow up to 20,000 pounds gross trailer weight and 2,700 pounds tongue weight (limited to lowest-rated towing component).
  • 2 Inch Drop and 1/2 Inch Rise: MYCAN Towing ball mounts comes with a 2-1/2-inch x 2-1/2-inch shank to fit virtually any industry-standard 2-1/2-inch trailer hitch receiver. The tow ball mount also has a 4-inch drop and 2-1/2-inch rise to promote level towing.
  • 2 1/2 Receiver Hitch: Hitching up your trailer is easy with this 2 1/2 inch ball mount. MYCAN forged trailer hitch ball mount features a 1-1/4-inch hole to accept a trailer hitch ball with a 1-1/4-inch diameter shank.
  • Corrosion-Resistant: For long-lasting use, this trailer hitch ball mount 2 1/2 inch is with highly durable carbide black powder coat finish, solid trailer hitch ball mount easily resisting damage from rain, dirt, snow, road salt and other corrosive threats.
  • Easy to Install: To install this class 5 hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2 1/2 inch trialer hitch receiver. The rounded shank makes installation easy. Then, secure the shank with a hitch pin.
Check Stock

Teng Tools Heavy Duty Copper & Aluminum Electric Cable Cutter/Wire Rope Shears - 496, Silver

  • Heavy duty drop forged cable cutter featuring chrome molybdenum alloy steel blades. Hardened to maintain the cutting edge.
  • Compound leverage increases cutting power while reducing the cutting effort. Two component handle for comfortable cutting.
  • Quick/simple spring free automatic latch design (one hand release) which provides safety and convenience.
  • The cable cutter cuts copper and aluminium electric cable up to size 2AWG 14mm HRC60-62.
  • Capacity: Electrical cables- 12mm. Lifetime warranty.
Check Stock

CURT 13272 Class 3 Trailer Hitch, 2-Inch Receiver, Compatible with Select Lexus RX350 , Black

  • DEPENDABLE STRENGTH. This heavy-duty ball hitch is constructed from high-strength forged steel and is rated to tow up to 20,000 pounds gross trailer weight and 2,700 pounds tongue weight (limited to lowest-rated towing component).
  • HEAVY-DUTY. This forged trailer hitch ball mount comes with a 2-1/2-inch x 2-1/2-inch shank to fit any industry-standard 2-1/2-inch receiver. The ball mount also has a 4-inch drop and 2-1/2-inch rise to promote level towing.
  • READY TO TOW. Hitching up your heavy-duty trailer is easy with this 2-1/2-inch ball mount. It features a 1-1/4-inch hole to accept a trailer hitch ball with a 1-1/4-inch diameter shank (trailer ball sold separately).
  • CORROSION-RESISTANT. For long-lasting use, this truck ball hitch is protected with a highly durable carbide black powder coat finish, easily resisting damage from rain, dirt, snow, road salt and other corrosive threats.
  • EASY TO INSTALL. To install this class 5 hitch ball mount on your truck, simply insert the shank into your vehicle's 2-1/2-inch hitch receiver. The rounded shank makes installation easy. Then, secure the shank with a hitch pin (sold separately).
Check Stock

Amazon Basics Leather Hole Punch Set, Rotary Puncher, Multi Hole Sizes Maker Tool

  • Rotary hole punch and sizing tool for working with leather materials and more.
  • Creates punch hole sizes including 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm,and 5mm.
  • Ideal for leather craft projects, creating belt holes, works with leather and cardboard. Not recommended for leather with thickness above 3 mm.
  • Drop forged, heat treated steel component construction with a chrome finish.
  • Contoured ergonomic handle offers a comfortable, textured grip and easy usability.
Check Stock

BDS BDS55380 Fox 2.0 Dual Steering Stabilizer fits 17-19 F250 F350

  • Cold-forged, metal-impacted 6061 T6 aluminum shock body dissipates heat three times faster than a conventional steel body shock. The 2.0 Performance Series shock runs as cool as a 2.5 diameter shock on the same application..
  • FOX Racing Shox formulated race shock oil developed for ultimate performance at variable temperatures..
  • Heavy-duty gusseted mounting brackets / All hardware and instructions included.
  • Enhance vehicle control with reduced steering shimmy and bumpsteer.
  • Lessen side-to-side motion caused by wide tires and road conditions / Improve tire wear and front-end component life.
Check Stock

CURT 45431 Industrial Duty Forged Trailer Hitch Ball Mount Fits 3-Inch Receiver 21,000 lbs 1-1/4-Inch Hole 6-Inch Drop 4-Inch Rise

  • DEPENDABLE STRENGTH. This heavy-duty ball hitch is constructed from high-strength forged steel and is rated to tow up to 21,000 pounds gross trailer weight and 2,800 pounds tongue weight (limited to lowest-rated towing component).
  • HEAVY-DUTY. This forged trailer hitch ball mount comes with a 3-inch x 3-inch shank to fit any industry-standard 3-inch receiver. The ball mount also has a 6-inch drop and 4-inch rise to promote level towing.
  • READY TO TOW. Hitching up your heavy-duty trailer is easy with this 3-inch ball mount. It features a 1-1/4-inch hole to accept a trailer hitch ball with a 1-1/4-inch diameter shank (trailer ball sold separately).
  • CORROSION-RESISTANT. For long-lasting use, this truck ball hitch is protected with a highly durable carbide black powder coat finish, easily resisting damage from rain, dirt, snow, road salt and other corrosive threats.
  • EASY TO INSTALL. To install this hitch ball mount on your truck, simply insert the shank into your vehicle's 3-inch hitch receiver. The rounded shank makes installation easy. Then, secure the shank with a hitch pin (sold separately).
Check Stock

Diverter Rough in Valve for Delta R11000 3/6 Setting

  • SOLID BRASS CONSTRUCTION: Made from a single piece forged brass body for durability and leak proof reliability..
  • EASY TO INSTALL & TEST: Pressure test cap allows for testing before installation. Can be tested with air (200 psi) or water (300 psi) using supplied test cap.
  • Replaces Delta 6-Setting, 3-porter diverter rough-in valve R11600.-Additional components may be required for installation based on the diverter trim chosen. Specifications: -May require an additional component, Delta RP42410 to completely replace Delta R11600 Valve..
  • AFTERMARKET PART designed to be compatible with Delta trim and cartridges..
  • PEACE OF MIND: This part comes with a lifetime limited warranty. If you are not happy with the product or something goes wrong with the product, you can return it for full refund..
Check Stock

OTC Tools 6981 Blind Hole Puller Set with Storage Case

  • OTC's 6981 Blind Hole Puller Set is a versatile solution for blind or "hidden" bearings in machinery and equipment commonly found on the factory floor....
  • Innovative expanding collets are placed through the bore of part to be removed then expanded with an actuator pin so that the lips of the collet....
  • The unique design of the pin adapter allows the option of using a slide hammer to pop the bearing or bushing from it's seat, or use with a pulling....
  • 5 Collet/Pin combinations: .300 to .350 inch (1.5 inches reach), .350 to .438 inch (1.5 inches reach), .438 - .563 inch (1.75 inches reach), .563 -....
  • Forged and/or machined at OTC's factory in Owatonna, MN.
  • includes easy to read component application chart and instructions.
Check Stock

CURT 45459 Commercial Duty Forged Trailer Hitch Ball Mount 2-1/2-Inch Receiver 20,000 lbs 1-1/4-Inch Hole 6-Inch Drop 4-1/2-Inch Rise

  • DEPENDABLE STRENGTH. This heavy-duty ball hitch is constructed from high-strength forged steel and is rated to tow up to 20,000 pounds gross trailer weight and 2,700 pounds tongue weight (limited to lowest-rated towing component).
  • HEAVY-DUTY. This forged trailer hitch ball mount comes with a 2-1/2-inch x 2-1/2-inch shank to fit any industry-standard 2-1/2-inch receiver. The ball mount also has a 6-inch drop and 4-1/2-inch rise to promote level towing.
  • READY TO TOW. Hitching up your heavy-duty trailer is easy with this 2-1/2-inch ball mount. It features a 1-1/4-inch hole to accept a trailer hitch ball with a 1-1/4-inch diameter shank (trailer ball sold separately).
  • CORROSION-RESISTANT. For long-lasting use, this truck ball hitch is protected with a highly durable carbide black powder coat finish, easily resisting damage from rain, dirt, snow, road salt and other corrosive threats.
  • EASY TO INSTALL. To install this class 5 hitch ball mount on your truck, simply insert the shank into your vehicle's 2-1/2-inch hitch receiver. The rounded shank makes installation easy. Then, secure the shank with a hitch pin (sold separately).
Check Stock

CURT 45456 Commercial Duty Forged Trailer Hitch Ball Mount Fits 2-1/2-Inch Receiver 20,000 lbs 1-1/4-Inch Hole 2-Inch Drop 1/2-Inch Rise

  • DEPENDABLE STRENGTH. This heavy-duty ball hitch is constructed from high-strength forged steel and is rated to tow up to 20,000 pounds gross trailer weight and 2,700 pounds tongue weight (limited to lowest-rated towing component).
  • HEAVY-DUTY. This forged trailer hitch ball mount comes with a 2-1/2-inch x 2-1/2-inch shank to fit any industry-standard 2-1/2-inch receiver. The ball mount also has a 2-inch drop and 1/2-inch rise to promote level towing.
  • READY TO TOW. Hitching up your heavy-duty trailer is easy with this 2-1/2-inch ball mount. It features a 1-1/4-inch hole to accept a trailer hitch ball with a 1-1/4-inch diameter shank (trailer ball sold separately).
  • CORROSION-RESISTANT. For long-lasting use, this truck ball hitch is protected with a highly durable carbide black powder coat finish, easily resisting damage from rain, dirt, snow, road salt and other corrosive threats.
  • EASY TO INSTALL. To install this class 5 hitch ball mount on your truck, simply insert the shank into your vehicle's 2-1/2-inch hitch receiver. The rounded shank makes installation easy. Then, secure the shank with a hitch pin (sold separately).
Check Stock

CURT 45458 Commercial Duty Forged Trailer Hitch Ball Mount, Fits 2-1/2-Inch Receiver, 20,000 lbs, 1-1/4-Inch Hole, 4-Inch Drop, 2-1/2-In Rise

  • DEPENDABLE STRENGTH. This heavy-duty ball hitch is constructed from high-strength forged steel and is rated to tow up to 20,000 pounds gross trailer weight and 2,700 pounds tongue weight (limited to lowest-rated towing component).
  • HEAVY-DUTY. This forged trailer hitch ball mount comes with a 2-1/2-inch x 2-1/2-inch shank to fit any industry-standard 2-1/2-inch receiver. The ball mount also has a 4-inch drop and 2-1/2-inch rise to promote level towing.
  • READY TO TOW. Hitching up your heavy-duty trailer is easy with this 2-1/2-inch ball mount. It features a 1-1/4-inch hole to accept a trailer hitch ball with a 1-1/4-inch diameter shank (trailer ball sold separately).
  • CORROSION-RESISTANT. For long-lasting use, this truck ball hitch is protected with a highly durable carbide black powder coat finish, easily resisting damage from rain, dirt, snow, road salt and other corrosive threats.
  • EASY TO INSTALL. To install this class 5 hitch ball mount on your truck, simply insert the shank into your vehicle's 2-1/2-inch hitch receiver. The rounded shank makes installation easy. Then, secure the shank with a hitch pin (sold separately).
Check Stock

CURT 45430 Industrial Duty Forged Trailer Hitch Ball Mount Fits 3-Inch Receiver 21,000 lbs 1-1/4-Inch Hole 4-Inch Drop 2-Inch Rise CARBIDE BLACK POWDER COAT

  • DEPENDABLE STRENGTH. This heavy-duty ball hitch is constructed from high-strength forged steel and is rated to tow up to 21,000 pounds gross trailer weight and 2,800 pounds tongue weight (limited to lowest-rated towing component).
  • HEAVY-DUTY. This forged trailer hitch ball mount comes with a 3-inch x 3-inch shank to fit any industry-standard 3-inch receiver. The ball mount also has a 4-inch drop and 2-inch rise to promote level towing.
  • READY TO TOW. Hitching up your heavy-duty trailer is easy with this 3-inch ball mount. It features a 1-1/4-inch hole to accept a trailer hitch ball with a 1-1/4-inch diameter shank (trailer ball sold separately).
  • CORROSION-RESISTANT. For long-lasting use, this truck ball hitch is protected with a highly durable carbide black powder coat finish, easily resisting damage from rain, dirt, snow, road salt and other corrosive threats.
  • EASY TO INSTALL. To install this hitch ball mount on your truck, simply insert the shank into your vehicle's 3-inch hitch receiver. The rounded shank makes installation easy. Then, secure the shank with a hitch pin (sold separately).
Check Stock