Top Forged Brass Valve Reviews

Universal Integrated Shower Diverter Rough-in Valve Replacement for Delta R22000

Forged brass body for durability and leak proof.
Application type: For shower only, not recommended use for tub.
Can be used with 3 or 6 function Delta diverter trim, all MultiChoice shower trim cartridges.
Monitor pressure balance valve keeps water temperature within a safe +/-3Degree F (+/-1.6Degree C), helping to protect you from sudden changes in hot or cold water pressure.
One-piece forged valve body without Stops.

Check Stock

Kegco Standard Two Keg Door Mount Kegerator Beer Tap Conversion Kit with 5 lb. Co2 Tank

...o display PSI and Co2 volume, and a large, easy-to-use pressure adjustment knob. Also included are a manual pressure release valve and an integral tamper-proof safety relief valve that releases at 45-psi..
LEVER HANDLE KEG COUPLERS: These NSF-approved Kegco KT85D-L D System Keg Couplers feature sturdy nickel-plated forged brass bodies with stainless steel probes, and are designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use – simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
TWO CHROME BEER FAUCETS WITH BRASS LEVERS: Featuring a forged brass body and highly polished chrome finish, these NSF-approved Kegco CFBL beer faucets put a stylish finishing touch on your kegerator at a price you’ll love. The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles..
STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank colla....

Check Stock

Kegco HBK199S-2 Keg Dispenser

...s you what's left in the CO2 tank, so you don't run out of gas during a party. The chrome plated brass body has a large pressure adjustment knob for easy use and includes a manual pressure release valve..
LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L "D" System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished chrome finish, this NSF-approved Kegco CFBL beer faucet puts a stylish finishing touch on your kegerator at a price you'll love. The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles..
STANDARD METAL BEER FAUCET WRENCH: This beer faucet spanner wrench is an essential tool that allows you to quickly and confidently loosen or tighten shank collars without scratching y....

Check Stock

SharkBite 1/2 Inch Check Valve Push to Connect Brass Plumbing Fitting PEX Pipe Copper CPVC PE-RT HDPE U2008-0000LFA

SHARKBITE BRASS CHECK VALVE: This push-to-connect brass check valve allows you to prevent the reverse flow of water quickly and easily.
ideal for working in tight spaces **Remove using a disconnect clip or disconnect tongs**.
VERSATILE: Pushfit spring-loaded check valves work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
EASY TO INSTALL: The innovative push-to-connect design of the SharkBite brass check valves allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
can be installed horizontally or vertically.
PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
SPECS: Made with DZR forged brass, this check valve can withstand 200 degrees F and 150 PSI.

Check Stock

Kegco bf ebdck-nt Conversion Kit

.... The gauge on top of the regulator indicates CO2 pressure in the keg, while the gauge on the side indicates the remaining volume of CO2 gas. A pressure release valve is conveniently located on the body..
LEVER HANDLE KEG COUPLER: This NSF-approved Kegco KT85D-L "D" System Keg Coupler features a sturdy nickel-plated forged brass body with a stainless steel probe, and is designed for use with all domestic brand American D system Sankey kegs. The lever-handle design is easy to use - simply pull out and then down on the handle to couple the keg. A 55-psi pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg..
DOOR MOUNT STAINLESS STEEL DRIP TRAY: Our 6" x 4" door mount drip tray's clean design, durable stainless steel construction, and attractive brushed finish have made it a favorite of beer lovers. Hassle-free from start to finish, this drip tray can be quickly and easily mounted using the two screw holes in the backsplash, and when you're done dispensing for the day, a removable grill makes clean-up a breeze. This drip tray does not have a drain, so it will need to be emptied manually..
CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished ....

Check Stock

BACOENG Double Faucet Door Mount Kegerator Refrigerator Conversion Kit No Tank

...u will not have to be worried that your gas might run out. It also has a shutoff valve that features a built-in spring for preventing the backflow of beer. Pressure Relief Valve Releases at 45PSI..
2. LEVER HANDLE KEG COUPLER: This refers to a D System Keg Coupler that has a strong construction made of nickel-plated forged brass. The probe, on the other hand, is made of stainless steel. The unit can be used alongside any domestic brand American D system Sankey kegs. It features an easy-to-use design, where you only need to pull the lever handle out and down, in that order, to couple the keg. The coupling of the keg is quite convenient with the availability of a 55-psi pressure relief valve.
3. CHROME BEER FAUCET WITH BRASS LEVER: Featuring a forged brass body and highly polished chrome finish, this beer faucet puts a stylish finishing touch on your kegerator at a price you'll love.The brass shaft assembly and lever includes a non-stick ball washer for smooth operation, and the lever has standard threading that is compatible with most branded tap handles. This 4-1/8" long beer shank with nipple assembly is constructed from chrome-plated brass and can be mounted through a 1" hole..
4. METAL BEER FAUCET WRENCH: You need the ideal wrench spanner for lo....

Check Stock

3/4 Inch IPS Isolator Tankless Water Heater Service Valve Kit with Pressure Relief Valve, Clean Brass, 3/4 Inch Service Installation Valve for rheem,rinai,ecosmart,navien,noritz,takagi,bosch.

...ion】: The components are certified lead free. Meets all federal & state standards for lead levels in drinking water system components. You can also find the CSA certification on the pressure relief valve to prove its authenticity..
【Excellent Integrated Design】: Thickened brass body, gravity forging, one-piece forged brass body can effectively prevent any leakage or dripping, the main isolation valve group has passed a leak-free test before leaving the factory ,and can be used for a long time..
【Quality Commitment】: 100% full refund. If you don't like the product or it is not the product you want, please don't rush to leave a review, contact us as soon as possible, and we will process a return or a full refund for you. Your satisfaction is our greatest pursuit..

Check Stock

Diverter Rough in Valve for Delta R11000 3/6 Setting

SOLID BRASS CONSTRUCTION: Made from a single piece forged brass body for durability and leak proof reliability..
EASY TO INSTALL & TEST: Pressure test cap allows for testing before installation. Can be tested with air (200 psi) or water (300 psi) using supplied test cap.
Replaces Delta 6-Setting, 3-porter diverter rough-in valve R11600.-Additional components may be required for installation based on the diverter trim chosen. Specifications: -May require an additional component, Delta RP42410 to completely replace Delta R11600 Valve..
AFTERMARKET PART designed to be compatible with Delta trim and cartridges..
PEACE OF MIND: This part comes with a lifetime limited warranty. If you are not happy with the product or something goes wrong with the product, you can return it for full refund..

Check Stock

Kohler Part GP876851 (4 PACK)

Includes valve body, pressure balance cartridge, rough-in guide and mud guard.
1/2" Universal NPT & direct sweat inlets & outlets, with stops.
Service stops include integral check valves.
5. 0 gpm (18. 9 l/min) maximum flow rate at 45 psi.
Single lever design cycles from off through cold to hot.
Provides temperature regulation and automatic anti-scald protection.
One piece cartridge design simplifies installation and maintenance.
Adjustable high temperature limit stop to control maximum water temperature.
Requires valve trim to complete installation (sold separately).
Forged De-zincification Resistant Brass body provides long term reliability and resistance to aggressive water conditions.

Check Stock

Shower Diverter Rough-in Valve Replacement for Delta R11000 3, 6 Setting

BRASS CONSTRUCTION - Forged from solid brass.
3 PORT DIVERTER - Controls direction of water from mixing valve to desired application.
DIVERTER ONLY - Must combine with Delta R10000 for temprature control.
PRESSURE TEST - Pressure test cap allows for testing before installation. Can be tested with air (200 psi) or water (300 psi).
AFTERMARKET PART - For use with Delta 3 or 6 function diverter trims.

Check Stock

MIDLINE VALVE 822C234 Lead Free Full Port Forged Brass Ball Valve with Solder Cups, 1/2''

Forged Brass construction with Chrome Plated Brass ball.
With 1/2 inch solder cups for use with Copper pipes.
Upc approved lead free product for 150 psi steam and 600 psi wog.

Check Stock

Eastman Quarter-Turn Brass Angle Stop Valve, 1/2 inch FIP x 3/8 inch OD Comp, Chrome, 10733LF

✅DESIGN- Forged brass construction which provides strength and durability eliminating leaks. The chrome-plated finish gives it a modern look..
✅QUALITY- The Teflon seats of the valve resist corrosion and provide a watertight seal. Chrome-plated finish resists corrosion..
✅EASY TO USE- Brass ball mechanism provides ease of operation. It has a removable oval handle which provides easy grip..
✅FUNCTIONALITY-With 1/4 turn, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without turning off water to the entire home..
✅MEASUREMENT- Professional Series Quarter-Turn Angle Stop Valve has a 1/2-inch Iron Pipe Inlet (FIP) x 3/8-inch OD Compression Outlet..

Check Stock

Hayward AV10025T Series AV Angle Globe Valve, PVC Body, Threaded End, 1/4\ Size

Compression Style Stop Valve Ideal for Stopping, Starting, and Regulating Fluid Flow at a 90° Angle.
Manufactured for lead-free quality assurance.

Check Stock