Top Follow Focus Ring Reviews

Nitze 15mm Follow Focus Kit with 3 Reversible Drive Gears 3 Marking Disks Gear Ring Belt and Crank A/B Hard Stops and 360° Infinity Zoom Adjustable Dual Rod Cine Follow Focus - MF15D

【Adjustable Rail】Nitze MF15D follow focus features an adjustable rail above the 15mm rod clamp. It can be adjusted within 50 mm to fit your desired lens by twisting the red thumbscrew at the bottom..
【A/B Hard Stops】The follow focus system supports to preset A/B hard stops focal length or use 360° infinity zoom. Built-in threaded holes allow you to put A/B hard stops screws inside when not in use to prevent loss..
【Reversible Drive Gears】The follow focus kit contains 1 x 0.8 Mod/38 Teeth, 1 x 0.8 Mod/43 Teeth, 1 x 0.8 Mod/65 Teeth drive gears. And the drive gear is reversible. It can be mounted on the front or back side of the follow focus to meet different focusing needs..
【Three Marking Disks】The follow focus comes with three marking disks for interchangeble. Snap on magnetic marking disk can be easily attached or detached..
【Crank & Gear Ring Belt】T006-03 crank is included for speedy and accurate focusing. The gear ring belt can be used when your lens is without 0.8 pitch gears..

Check Stock

DSLRKIT Lens Focus Calibration Tool Alignment Ruler Folding Card(Pack of 2)

Compatible with Canon Nikon Sony and other DSLR Camera Camcorder DV Video.
Fits industry standard 15mm rod mounts and 60mm center to center distance.
Gear drive can adjust camera focus in a more accurate and smooth way.
Gear ring belt suitable for less than 100mm diameters lens.
White mark ring made of plastic and used to mark the scale on follow focus.
Note: Only follow focus, camera and other shoulder rig are not included.

Check Stock

for SLR DSLR Camera Accessories Adjustable Rubber Follow Focus Gear Ring Belt with Aluminum Alloy Grip for DSLR Camcorder Camera

Application: DSLR Camera, Camcorder, etc..

Check Stock

FILMCITY HS-2 Professional Hi-Grade Follow Focus with A/B Hard Stops Flexible Gear Belt & Speed Crank | for 15mm Rod Support & DSLR Video Camera Stabilizer Shoulder Rig HS-2

DP500IIS follow focus is upgraded based on the previous DP500II version I follow focus.More elegent apperance,more practicable. Quick-release....
There is an improvement on its inner structure to reach a high level in this field,which permits much less backlash,even better than the previous....
This improved Follow Focus Integrated with A/B Hard Stops which have easy begin/end setups for fast repeatable racking between two points, and make....
The white mark ring is made of magnet material.It can be detached or attached very easliy and quickly on matel-made follow focus.You can also buy....
The particular part of this follow focus is it can use different size gears.It can work with 3 different size gear to meet your different need with....

Check Stock

Tilta FF-T06 Mini Follow Focus Lens Zoom Control Lightweight for DSLR for Sony A7 A9 for Nikon GH5 BMPCC 4K 6K Cage

The Mini Follow Focus is made as a single unit with the ability to adjust the single rod attachment to fit any sized cine lens or photo lens. The single rod attachment mounts to any standard 15mm rail..
The Focus wheel features a 360 degree rotation with adjustable hard stops. The focus wheel also features a fluid dampening system that helps with precision focusing. The marking disk is removable and can be marked and cleaned for repeated use..
The kit includes the Mini Follow Focus, a Zip Tie Follow Focus Ring, a 15mm single rod attachment, two allen keys, a 15x100mm black aluminum rod and a portable case..
For lenses with different pitch gears, we will offer a variety of focus gear attachments..

Check Stock

Foto4easy JTZ DP30 Cine Follow Focus with 15mm/19mm Rail Rod Clamp Sytem KIT for FS5 FS7 A7M2 A7 A7R A7S A9 C100 C300 C500 Blackmagic URSA Mini BMCC BMPCC 4K 6K ARRI Lens Video Cinema DSLR Cameras

This bundle product is selected becaused most of our customers purchased them together. 【PACKAGE INCLUDES】1 x Mini Follow Focus, 1 x M0.8-38T Gear, 1 x M0.85-43T Gear, 1 x M0.85-65T Gear, 1 x Φ15mm Rod, 1 x Rod Clamp (with NATO rail), 1 x Tie-style Focus Gear Ring, 1 x Screwdriver.
【ADJUSTABLE AB MARKS】The AB marks are adjustable, which can quickly release the limit. It meets the requirement of 360 infinite zoom and easy to switch between AB focal length and full focal length..
【MODULAR DESIGN】SmallRig 3010 adopts modular design allows for assembling and disassembling the Mini Follow Focus 3010 on the left and upper sides of the cage quickly and easily. Besides, the included 15mm Rod 1050 and Rod Clamp (with NATO rail) 3011 allows for attaching kinds of Smallrig accessories such as NATO Side Handle 2187 and Super Clamp Mount 1124 to improve the compactness of your cage..
【MULTIPLE SHOOTING SCENES】SmallRig 3010 can be mounted at different angles, supporting precise adjustment and convenient shooting experience in handheld and tripod scenarios. Furthermore, Tie-style Focus Gear Ring 3284 is fixed on the camera lens and can be used with interchangeable M0.8 gears (standard M0.8-43T gear 3201, optional model: M0.8-65T gear 3200, M0.8-3....

Check Stock

SmallRig Mini Follow Focus with A/B Stops & 15mm Rod Clamp and Snap-on Gear Ring Belt for DLSRs and Mirrorless Cameras Fits Different Diameter Lenses Up to 114mm - 3010

【COMPACT DESIGN】SmallRig Mini Follow Focus 3010 is designed for easy and quick focus control in video shooting. It is basically compatible with the most cameras on the market like DLSRs & Mirrorless Cameras. In addition, it features a super lightweight design with only 195g, compact and portable, easy for carrying outside..
【ADJUSTABLE A/B STOPS】The A/B hard stops of the follow focus are adjustable, you can adjust the suitable A/B focal length according to your shooting needs. Moreover, by turning on/off the AB stops lock, you can realize the easily switch of focal length between 360° unlimited zoom and A/B focal length..
【ANTI-SLIP & ANTI-SWEAT DESIGN】The Mini Follow Focus 3010 imitates sports car hub, adopts anti-slip and anti-sweat design, and its excellent damping feeling and ergonomic design helps to control the focal length you need more accurately and comfortable, thus realizing a better shooting..
【MODULAR DESIGN】SmallRig Follow Focus 3010 adopts modular design that allows for assembling and disassembling on the left and upper sides of the camera rapidly and easily. Besides, the included 15mm Rod 1050 and Rod Clamp (with NATO rail) 3011 allows for attaching other SmallRig accessories such as NATO Side Handle 2187, Super....

Check Stock

Tilta FF-T06 Mini Follow Focus | Lightweight, Mechanical Lens Control for DSLRs, Sony A7 A9 for Nikon GH5 BMPCC 4K 6K Cage | FF-T06

adjustable rubber-lined metal band firmly grips zoom or focus lens rings.
end wheel finger grip makes very smooth lens moves.
fits lens rings from 50mm to 80mm diameter.
For full lens zooms or deep focus pull actions, this device is superior.
it easily covers the full lens ring range without pauses or extreme wrist twists required with a follow focus, and it can produce ultra slow zooms like a pro camcorder.
Not applicable for really fast (fat) lenses like f-1.4 as these lens rings are too large.

Check Stock

Neewer A-B Stop Follow Focus C2 with Gear Ring Belt for DSLR Cameras Such as Nikon,Canon,Sony DV/Camcorder/Film/Video Cameras,Fits 15mm Rod Mounts,Shoulder Supports

Completely gear-driven design for slip-free, accurate, and repeatable focus movement.
This Follow Focus Integrated with A/B Hard Stops which have easy begin/end setups for fast repeatable racking between two points, and make focusing lenses that have no hard stops (such as Canon EF lenses) much easier..
Mounts onto 15 mm Rod Support (60mm center to center difference)..
Gear drive can be mounted from both sides.
The white mark ring is made of magnet material. It can be detached or attached very easily and quickly on metal-made follow focus..

Check Stock

Tilta Tiltaing Pocket Follow Focus | Pull Focus on DSLR Mirrorless and Compact Cine Lenses | A/B Stops | Includes 15mm Rod & Rod Holder Mount | FF-T07

[Upgraded Design] the new composite material construction is stronger, more durable, and more reliable to withstand more wear and tear, making it ideal for everyday use..
[A/B Marks] Can be perfectly set and quickly engaged via new quick release hard stop system with its lightning-fast speed, precision, and ease of use..
[Interchangeable Gears] With the ability to accommodate lenses with various gear ring sizes, the pocket follow focus provide unparalleled versatility and flexibility..
[Tactile Focus] With its simulated lens damping and non-slip grip, Tilta Pocket Follow Focus provides the ultimate in precision and control for photographers and videographers of all levels..
[Compatible] with a wide range of cameras, rigs, and other equipment via a single 15mm rod that offer you the ultimate in flexibility and versatility..

Check Stock

SMALLRIG Adjustable Handle Sling Handgrip for DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro Gimbal Handheld Stabilizer - 3028

【COMPACT DESIGN】SmallRig Mini Follow Focus 3010 is designed for easy and quick focus control in video shooting. It is basically compatible with....
【ADJUSTABLE A/B STOPS】The A/B hard stops of the follow focus are adjustable, you can adjust the suitable A/B focal length according to your....
【ANTI-SLIP & ANTI-SWEAT DESIGN】The Mini Follow Focus 3010 imitates sports car hub, adopts anti-slip and anti-sweat design, and its excellent....
【MODULAR DESIGN】SmallRig Follow Focus 3010 adopts modular design that allows for assembling and disassembling on the left and upper sides of the....
【MULTIPLE SHOOTING SCENES】The installation angle of this follow focus can be adjusted, supports handheld, tripod mounted and other shooting....

Check Stock

Fotga Upgraded DP500 Mark III Dampen Follow Focus for 15mm Rods Rig Fit for All DSLR Video Cameras Blackmagic BMCC BMPCC 5DIII 5DIV Sony A7R A7S A7SII A7III A7SIII A9 GH3 GH4 GH5 GH5s D500

Fotga DP500III follow focus,compatible with 15mm rail system.Dampened design gives virtually zero backlash..
Made of aluminum,CNC machined.Drive gear (M0.8) can be mounted from both side.(Works for both right-handed and left handed),.
Mark ring can be repeatly used,and also can be removed and replaced..
The addition of new heat resistant engineering rubber cover on handwheel, relative to the primary bare metal handwheel, is more easy to operate in cold weather and regions, and also more comfortable in peacetime use..
The Ultimate Digital Interface make the system smarter and digitized: Compatible with JTZ X TYPE standard drive gear interface and mark ring interface. The JTZ X TYPE standard is the ultimate interfaces for all Fotga DP500 series, all future upgrade version like 500IV/V will follow this standard to make accessories compatible. Innovative digitized and visual monitoring with the follow focus extension, make it possible to operate anywhere to go for an independent photographer or a team.

Check Stock

Movo F2X Precision Follow Focus System with Hard Stops and 65mm, 75mm, 85mm Adjustable Gear Rings

COMPATIBILITY: All rings have the same outer diameter and will work with most follow focus systems (standard 32 pitch - 0.8 mod).
SET OF 3: Each focus ring are adjustable and fit 65mm, 75mm, and 85mm lenses.
1-YEAR WARRANTY: We’ve got your back! Our products are designed to ease your technical woes, not add to them. Our friendly US-Based support is here to help.
DURABLE: Made with hard plastic, the lens rings can endure the rigorous turning and adjusting without breaking easily.
PROFESSIONAL FOCUSING: These lens rings feature a large pitch diameter so you can accurately focus your subjects clearly and in-frame with ease.

Check Stock