Top Floor Jack Aluminum Reviews

BILT Hard Aluminum and Steel Floor Jack, Low Profile Hydraulic Racing Floor Jack with Dual Piston Rapid Pump, 1.5 Ton Capacity (3,000 lb) , Blue

  • Durable but Lightweight: BILT HARD hydraulic floor jack features industrial quality for professional mechanics and hardcore. It is constructed of a high strength aluminum billet and some steel components, weighs only 75% of the steel one at most. The sapphire anodized finish on the surface also makes it rust and corrosion resistant..
  • Low Profile: The aluminum racing floor jack has 1.5-ton/3,000 lb. lifting capacity with 3-1/8 in. to 14-1/4 in. lifting range, it provides you with a bottom height low enough to get underneath a lower vehicle while still providing enough maximum height to lift the vehicle off the ground..
  • Easy Operation: The 1.5 Ton floor jack comes pre-filled with oil, it is ready to use after simply assembling the 2 handles together and putting it into position. Please just remember to turn the long handle clock-wise until tight before raising, and VERY SLOWLY turn the handle gently counterclockwise to lower it..
  • Rapid Pump: The high performance low profile car jack has a exclusive dual parallel pump system that lifts most work loads in just 3-1/2 pumps! It also has a universal joint release mechanism for con....
Check Stock

BIG RED AT830011LR Torin Hydraulic Low Profile Aluminum and Steel Racing Floor Jack with Dual Piston Quick Lift Pump, 3 Ton (6,000 lb) Capacity, Red

  • Racing floor jack can be used for general or specialty use and features a 3 ton (6,000 lb) load capacity.
  • Foam bumper on the handle helps protect your vehicle from damage.
  • Constructed of durable, high-strength aluminum and steel.
  • Dual piston quick lift pump allows you to easily raise the jack to the desired height.
  • Lifting range from 3-15/16″ to 18-5/16″ allows you can gain easy access under low-profile vehicles.
  • The aluminum floor jack is equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability.
  • Convenient side handle makes it easy to carry.
  • Features a built-in safety overload system prevents use beyond load capacity.
  • Includes a limited 1 year manufacturer warranty.
Check Stock

K Tool International 63131B 3 Ton Automotive Service Floor Jack for Garages Repair Shops and DIY Portable Compact 6,000 lbs Capacity Hydraulic Lifting Range 5.5 - 8.75 Heavy Duty Steel Red

  • [3 TON CAPACITY] Needing to jack your car or truck? This floor jack 3 ton is rated to lift up to 6,000 lbs..
  • [LIFTING RANGE] Service jack has a lifting range of 5.5" - 18.75". This service Jack provides flexibility for a variety of automotive needs.
  • [BUILT-IN VALVE] The valve prevents over-extension of hydraulic ram and jack use beyond rate capacity. Added protection for the lift.
  • [SWIVEL CASTERS] The swivel rear casters and saddle provide smooth maneuvering and positioning around cars and trucks. Wide track front wheels provide stability while rear swivel casters provide easy maneuverability.
  • [NYLON WHEELS] Nylon wheels will protect the floor surface in the shop or garage. Aluminum wheels often scratch and scuff up shop and garage floors. Our wheel material prevents that.
Check Stock

OEMTOOLS 24835 Hydraulic Floor Jack, 2.5 Ton Low Profile Automotive Jack, Quick Vehicle Lift Up to 14 Inches, Portable Hydraulic Lift, Fits Under Nearly Any Vehicle

  • HYDRAULIC CAR LIFT: The hydraulic jack is designed to lift 2.5 ton vehicles with minimal effort when performing services or maintenance work.
  • Hydraulic jack lift is built for performance and ease of use.
  • Valuable shop floor jack or garage floor jack.
  • LOW PROFILE FLOOR JACK: Our low profile car jack makes working with low-clearance vehicles much easier, getting under vehicles that standard hydraulic car jacks cannot fit.
  • These low profile floor jacks have a maximum lifting height of 14 inches.
  • SAFE TO USE: These floor jacks for cars, trucks, SUVs, and many other vehicles feature an overload system that prevents use beyond the rated capacity of 2.5 tons.
  • 2.5 ton floor jack can safely fit under and lift nearly any vehicle within its capacity.
  • PORTABLE CAR JACK: This car lifter jack comes with floor jack casters for convenient portability.
  • Heavy duty floor jack features (2) 360 degree rear swivel casters for easy maneuvering.
  • Easily transport this portable car lift around your garage.
  • PRODUCT SPECIFICATIONS: (1) Vehicle Hydraulic Jack.
  • (2) 360 Degree Rear Swivel Casters and (2) Large Front Casters.
Check Stock

OEMTOOLS 24836 Hydraulic Floor Jack, 3-1/2 Ton Capacity, Car Jack Hydraulic Lift, Foot Pedal for Quick Vehicle Lift, Rapid Pump Jack, Rear Swivel Casters

  • HIGH-CAPACITY AUTO JACK: This hydraulic car lift is designed to lift 3-1/2 tons with minimal effort.
  • Reliable car floor jack, truck jack, SUV jack, and RV jack.
  • Lift jack not designed to support vehicles.
  • FAST LIFT FUNCTIONALITY: Our quick car jack includes a foot pedal for faster setup.
  • Excellent shop floor jack or garage floor jack for increased productivity.
  • Get to work servicing vehicles much faster with these floor jacks.
  • RAPID PUMP FLOOR JACK: This vehicle jack features a fast action dual pump design for quicker car lifting.
  • Heavy duty car jack makes it easy to lift and service standard vehicles.
  • Get the job done on time with this fast jack.
  • EASY TO MANEUVER: Our automotive floor jack comes with 360 degree rear swivel casters, making it an easy car jack to maneuver from vehicle to vehicle in your shop or garage.
  • PRODUCT SPECIFICATIONS: Weight Capacity: 3-1/2 Tons.
Check Stock

AME 13121 Aluminum Jack (55 Ton 6\ Stroke with New Saddle and)

  • DURABLE FOUNDATION JACK POSTS: Old houses and natural disasters often lead to cracked floor joists, rotting support beams, and sagging porches or decks.
  • Pick up the slack by fortifying your home structures with the BISupply Adjustable Jack Posts Basement Floor Joist Support Jack.
  • These house leveling jacks are easy to install and adjust and are designed for stabilizing and supporting beams and joists during construction and repairs.
  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 12 inches to 16 inches (30.5 to 40.7 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Min and max heights offer up to 9,700-pound (4,400 kg) weight capacity.
Check Stock

ABN 5-½in Large Jack Pad Universal Fit Cross Slotted Frame Rail Protector

  • SAFELY LIFT YOUR VEHICLE WITHOUT DAMAGE: The ABN Large 5.5-Inch Pinch Weld Jack Pad Car Jack Puck 1-Pack is a floor jack pad that prevents the jack from exposing structural metal and is designed to protect the pinch welds, your vehicle under chassis, and overall frame so you can safely lift your vehicle at the proper jack points without scratching paint or causing metal-on-metal damage while using a hydraulic jack.
  • BUILT FOR SAFETY: This floor jack rubber pad is constructed from stiff rubber that cushions your car from damage and increases safety when secured properly.
  • Bottom side of slotted rubber jack pad includes textured grooves to ensure correct and safe fitment on jack without slippage.
  • USE YOUR JACK: Top side of car jack pad has slotted crosshairs to align with and protect side pinch welds while the bottom of the jack lift pad is also keyed with 4 recesses that fit onto 4-inch cup rim lugs on your jack to prevent the pad from spinning on the floor jack cup (cup and pad contact starts between these lugs).
  • LARGE SIZE: Fits beveled 5.5-inch steel lift cups bowl saddles on standard hydraulic floor jacks.
  • Floor jack saddle pad has 5.5-inch (14cm) top diameter and 4-inch (10.2cm) bottom diameter, 1.75-inch height (4.4cm), 4 slots have approx. 0.4-inch ....
Check Stock

Akron Products Big-Moe Adjustable Floor Jack - Size Range 4'8\-8'4\ (11GA)

  • DURABLE FOUNDATION JACK POSTS: Old houses and natural disasters often lead to cracked floor joists, rotting support beams, and sagging porches or decks.
  • Pick up the slack temporarily fortifying your homes structure with the BISupply Adjustable Jack Posts Basement Floor Joist Support Jack.
  • These house leveling jacks are easy to install and adjust and are designed for stabilizing and supporting beams and joists during construction and repairs.
  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate and (2) locking pins.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 19 inches to 36 inches (48.3 to 91.4 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Load bearing capacity decreases as jack height extends.
Check Stock

Adjustable Support Jack for The Floor,Post Floor Joist Jacks,Mini Screw Jack- Post 10\ to 13\

  • DURABLE FOUNDATION JACK POSTS: Old houses and natural disasters often lead to cracked floor joists, rotting support beams, and sagging porches or decks.
  • Pick up the slack temporarily fortifying your homes structure with the BISupply Adjustable Jack Posts Basement Floor Joist Support Jack.
  • These house leveling jacks are easy to install and adjust and are designed for stabilizing and supporting beams and joists during construction and repairs.
  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate and (2) locking pins.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 19 inches to 36 inches (48.3 to 91.4 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Load bearing capacity decreases as jack height extends.
Check Stock

BISupply Basement Floor Jacks – 150in Adjustable House Jacks for Leveling, Basement Jack Post Floor Joist Jacks

  • DURABLE FOUNDATION JACK POSTS: Old houses and natural disasters often lead to cracked floor joists, rotting support beams, and sagging porches or decks.
  • Pick up the slack temporarily fortifying your homes structure with the BISupply Adjustable Jack Posts Basement Floor Joist Support Jack.
  • These house leveling jacks are easy to install and adjust and are designed for stabilizing and supporting beams and joists during construction and repairs.
  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate and (4) locking pins.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 54 inches to 150 inches (137.2 to 381 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Load bearing capacity decreases as jack height extends.
Check Stock

Jack Boss Jack Pad Universal Large Floor Jack Rubber Pads Adapter Pinch,Weld Side Frame Rail Protector Puck/Pad (1 Pack)

  • 【Material&Function】Sturdy rubber jack pad is durable and non-deformable with long service life.Soft enough pad surface is to prevent frame rails and pinch welds from bending,and protect painted or coated chassis parts when using floor jack to lift the car.
  • 【Unique Groove Design】Center down groove design of floor jack adapter provide more cushion and crush resistance.The wider and deeper groove contact area than other rubber pads ，making groove aligns nicely insert weld.Fits snug at the base and sits very sturdy on the jack.Have greater security.
  • 【Size&Note】Jack pads diameter：4.17 inch.Thickness:1 inch.Groove width:0.7inch.Groove depth:0.23 inch.Maximum load bearing:3 Ton. 1*jack pad. Please measure floor jack's saddle size before purchase.
  • 【Universal Floor Jack Rubber Pad】Protector Puck/Pad fit most standard hydraulic floor jacks and vehicles.Easy to install and change.
  • 【Notes】If you have any question you can contact us，we will be the first time to solve for you.Our floor jack pads are tested for strict quality.
Check Stock

Skelang 2 Pcs Racing Jack Caster Wheel with 12mm Stem for 3 Ton Floor Jack

  • This jack caster is made of steel, durable and solid in construction.
  • The jack caster measures 2-3/8" in wheel diameter, 3-3/8" in mounting height.
  • stem size measures 12mm x 7/8" (Dia. x H).
  • Compatible with 3 ton rated floor jack with 12mm mounting holes (Please check the size before order).
  • Package includes jack casters, washers and nuts.
  • it's easy to screw the caster onto the floor jack.
  • It's great to replace old, worn or damaged casters on the floor jack, making the floor jack roll around with ease.
Check Stock

Replacement Aluminum Racing Jack Caster Wheels for 3 Ton Floor Jacks (2 Pc Set)

  • Great replacement for damaged casters on aluminum racing jacks.
  • Please see dimension photo for fitment on your jack.
Check Stock