Top Floor Flanges Reviews

Oatey Fix-it Flange Repair Ring

  • Fix-it ring repairs broken, cracked or worn out toilet flanges.
  • Fits all flange and toilet installations.
  • Works with all flooring types, including concrete.
  • Engineered for secure connection to the floor.
Check Stock

Oatey 43551 Replacement Ring, for Use with 4 in Closet Flanges, 3-Inch or 4-Inch, Brass

  • 3 countersunk holes and 3 closet bolt slots for secure attachment to the floor.
  • 3-Inch Spigot Closet Flange fits inside the hub end of 3-Inch Schedule 40 DWV fitting.
  • 4-Inch Spigot Closet Flange fits inside the hub end of 4-Inch Schedule 40 DWV fitting.
  • Solvent weld into fitting-short throat length is perfect for use in tight spaces and where the fitting is close to the sub-floor.
  • Four mounting slots for proper fit and alignment of closet bolts to the toilet.
Check Stock

Plumb Craft Complete Toilet Repair Kit (34 pieces)

  • NO WAX, NO MESS - The easiest way to install a toilet seal ring & fix leaks.
  • UNIVERSAL DESIGN FITS ALL FLANGE TYPES AND FLOOR HEIGHTS - Adapts to fit above, even and below floor flanges and 3-inch and 4-inch drain pipes.
  • TOILET BOWL RING REPOSITIONABLE DURING INSTALLATION - A wax ring can be ruined and must be replaced if the toilet is not set properly on the first try - The user-friendly Wax free toilet gasket allows for multiple toilet setting attempts.
  • MADE IN USA - Proudly made in America and backed by a 10 year. EXCLUSIVE LONGEST LASTING red rubber.
  • TOILET SEALS WILL NOT FREEZE OR MELT - As temperatures fluctuate, the consistency of a wax ring can range from a sticky mess to a hardened block. EASY TO INSTALL, the 6000BP toilet parts include: (1) Wax-free seal, (1) Set of hardware and (1) Instruction.
Check Stock

OATEY 43401 Set-Rite Toilet Flange Extender Kit, 1/4\ - 1\

  • Corrects an improper flange height from 1/4 in. - 1 in. during repair and remodels.
  • Easily extend the flange surface above the floor for optimum sealing with a standard wax ring.
  • Use on existing PVC, ABS, cast iron, and stainless steel ringed flanges.
  • Spacers can be combined to meet the desired height.
  • Foam rubber gasket seals the spacers to the new flange.
Check Stock

Accord ABBBWH18 Baseboard Register with Sunburst Design, 18-Inch(Duct Opening Measurement), White

  • For floor application, 2-3/4-in projection.
  • 180˚ air deflection with a volume control damper.
  • Removable faceplate for easy installation and cleaning.
  • inside duct opening measurement of item is 15-inches to accommodate the 1 ½-inch wide flanges on each end.
Check Stock

Willow Pump Breast Pump Flanges, 2-Pack | Breast Shield & Nipple Visibility for Hands-Free Breast Feeding | Compatible with Willow Pump Milk Bags (Clear, 21mm)

  • REUSABLE FLANGES: Flanges are clear flanges colored for nipple visibility & alignment for easy placement and fast assembly to ensure effective suction. Flanges are reusable, but should be replaced every 3 months for optimal performance..
  • HANDS FREE PUMPING: Completely mobile and hands-free & easy to assemble – everything fits inside the pump without cords or attachments. This breast feeding accessory gives you the ability to pump directly into storage milk bags (sold separately), no need to transfer..
  • AVAILABLE IN 3 SIZES: Reference our sizing chart (pictured) to determine your size for optimal pumping experience. Flanges come in three sizes: 21mm, 24mm, and 27mm..
  • PUMP AND STORE: After pumping, remove flange & milk bag and store in a cooler bag, fridge or freezer - and easily transfer to a bottle when you’re ready to feed. These flanges are easy to clean, dishwasher safe and BPA free..
  • USE WITH WILLOW PUMP: Exclusively designed to work with the Willow Wearable Breast Pump Generations 2 and 3. The only wearable pump that is totally enclosed and spill-proof in any po....
Check Stock

Banjo TC206 2\ T-Bolt Hose Clamp

  • Features a Quick Release T-Bolt to allow quick and easy installation without having to fully disassemble the clamp..
  • The clamp is made of 100% 304 stainless steel for excellent weather and corrosion resistance..
  • HPS Aluminum V-Band flanges are made of 6061 aluminum and utilize a NBR o-ring to create an air-tight seal for positive pressure applications. Ideal for intercooler piping systems as well as intake systems..
  • The HPS Aluminum V-Band flanges feature a male and female side to automatically align the flanges onto each other to eliminate improper installation..
  • The back side of HPS V-Band flanges feature a recessed lip to help center your aluminum tubing to the flange and allow unrestricted air flow. REMARK: Do not use HPS Aluminum V-Band kits for exhaust applications..
Check Stock

Maymom Flange 15mm Inserts Compatible with Medela, Spectra 24 mm Shields/Flanges, Momcozy/Willow Wearable Cup. Compatible with Medela Freestyle, Harmony, to Reduce 24mm Down to 15 mm; 2pc/Each

  • Maymom 15 mm inserts (Long) compatible with Medela PersonalFit/Spectra 24 mm shields. It will reduce the 24-mm shield nipple tunnel down to 15 mm. Also compatible with Momcozy/LegendairyMilk/Tsrete Wearable 24mm silicone cups..
  • Maintain compatibility with most handsfree bra - Based on the Medela PersonalFit system. You can use most handsfree bra with your original 24 mm detachable shields having this insert inside..
  • Can be compatible with Spectra 24mm flanges, Ameda Purely Yours 25mm flanges, Ameda Mya Joy 25mm flanges, Willow 24mm flanges, Lansino 24mm flanges. Momcozy S9/S10/S12 Wearable Breastpump 24 mm cups ( NOT for 27 mm M1 cups).
  • Also fits Freemie 25 mm cup to reduce its nipple tunnel.
Check Stock

Willow Pump Willow Go™ Wearable Breast Pump Flange Set, 2 Pack | Breast Shield for Hands Free, Cord Free Double Electric Breast Pump | Clear, 24mm

  • REUSABLE FLANGES: Flanges are clear colored for nipple visibility and alignment for easy placement and fast assembly to ensure effective suction. Flanges are reusable, but should be replaced every 3 months for optimal performance..
  • HANDS FREE PUMPING: Completely mobile and hands-free & easy to assemble – everything fits inside the pump without cords or attachments. This breast feeding accessory gives you the ability to pump directly into Willow Go Reusable Breast Milk Containers and easily transfer to a storage container or bottle when you’re ready to feed..
  • AVAILABLE IN 3 SIZES: Reference our sizing chart (pictured) to determine your size for optimal pumping experience. Flanges come in three sizes: 21mm, 24mm, and 27mm. In addition, 24mm flanges are compatible with sizing inserts for mamas who measure smaller than 21mm..
  • EASY TO CLEAN: Dishwasher-safe for easy cleanup..
  • USE WITH THE WILLOW GO PUMP: Exclusively designed to work with the Willow Go Wearable Breast Pump..
Check Stock

Maymom Flange Inserts 19 mm for Medela, Spectra 24 mm Shields/Flanges, Momcozy/Willow Wearable Cup. Compatible with Medela Freestyle, Harmony to Reduce 24mm Nipple Tunnel Down to 19 mm; 2pc/Each

  • Maymom 19 mm inserts (Long) compatible with Medela PersonalFit/Spectra 24 mm shields. It will reduce the 24-mm shield nipple tunnel down to 19 mm. Also compatible with Momcozy/LegendaryMilk/Tsrete Wearable 24mm silicone cups..
  • Maintain compatibility with most handsfree bra – Based on the Medela PersonalFit system. You can use most handsfree bra with your original 24 mm detachable shields having this insert inside..
  • Can be compatible with Spectra 24mm flanges, Ameda Purely Yours 25mm flanges, Ameda Mya Joy 25mm flanges, Willow 24mm flanges, Lansino 24mm flanges. Momcozy S9/S10/S12 Wearable Breastpump 24 mm cups (not for 27 mm cups).
  • Also fits freemie 25 mm cup to reduce its nipple tunnel.
Check Stock

NEXT BY DANCO All-in-One Toilet Installation Kit | Perfect Seal Wax Ring & Zero Cut Bolts | Toilet Repair | Wax-Free | Mounting Toilet Bolts (10879X) , Blue

  • NO MESS: Perfect Seal has a hidden wax ring which causes no mess and 3X's stronger seal than regular wax rings.
  • REPOSITIONING CAPABILITY: Both the Perfect Seal and Zero Cut Bolts allow for multiple toilet repositions as needed during installation.
  • NO CUTTING REQUIRED: brass and stainless steel bolts are adjustable up to 3 inches and can be easily turned by hand for perfect height. The SLIDING ADAPTERS tighten the bolts and the low-profile caps featuer an easy lock and release mechanism.
  • WORKS WITH FLANGES that are 1/2 inch ABOVE the floor or 1-1/2 inches BELOW the floor for installation compatibility with most toilet situations.
  • HELPFUL TIP: When toilet does not sit flush to the floor, the black plsatic ring inside the gray rubber casing can be removed allowing the Perfect Seal to be fully compressed.
Check Stock

Reed Tool IC1SL Internal Pipe Cutter with 1.26-Inch Saw Tooth Blade and 7-Inch Shaft

  • Conveniently cut from the inside using a standard 3/8" drill.
  • Used to cut off pipes below floor level or in the ceiling in new construction.
  • Also use around pools and for replacement of closet flanges.
  • Internal pipe cutters make for fast cutting.
Check Stock

5042 15 Amp, 125 Volt, Duplex Receptacle On 4-Inch Cover, Zinc Plated Steel - 4 PACK

  • Provides a floor mounted outlet for commercial or residential locations. Junction box required for mounting (not included).
  • Features durable weatherproof, corrosive resistant brass cover and hardware to ensure longer product lifespan.
  • Install in hardwood, tile, carpet, marble and granite flooring. Cover Dimensions: 4" Diameter (101.6mm).
  • Compatible with ENERLITES Mounting Flanges, Part Numbers: 975509-C, 975518-C. For concrete slab installations use with ENLC00LR, and ENLC001..
  • Receptacle included. Meets 2011 NEC Article 406.14 for tamper-resistant outlets. UL listed.
Check Stock