Top Float Glass Machinery Reviews

uxcell R18 10mm x 20mm Black Plastic Cable Wire Carrier Drag Chain 1M Length for CNC

  • Internal Size: 10x20mm(0.394x0.787 inch).
  • Change Size: You could link the cables with each other to form one long length you need..
  • Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
  • NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
  • The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection machines, robots, overweight transportation equipment, automated warehouses and so on..
Check Stock

10mm x 10mm Length 1M Black Plastic Open Type Cable Wire Carrier Drag Chain Towline R18 for 3D Printer and CNC Machines

  • The Cable Drag Chain is easy to install and repair, free movement, low noise, wear-resistant, high-speed movement.
  • You can link the cables with each other to form one long length you need.
  • Surface gloss,Low temperature resistance, wear resistance and corrosion resistance.
  • Suitable for reciprocating motion in occasions, with built-in cables, pipes, water pipes, etc.
  • The Drag chain has been widely used in CNC machine tools,electronic equipments, fire machinery, stone machinery, glass machinery, doors and windows machinery, counting devices, electrical machines, etc.
Check Stock

uxcell R28 15mm x 15mm Black Plastic Cable Wire Carrier Drag Chain 1M Length for CNC 1 Hole

  • External Size: 20x23mm(0.787x0.906 inch).
  • Change Size: You could link the cables with each other to form one long length you need..
  • Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
  • NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
  • The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection machines, robots, overweight transportation equipment, automated warehouses and so on..
Check Stock

RCH Hardware CH-S56-11S-BLK-10 |9 Gauge Decorative Solid Steel Standard Link Fixture Chain | 10 Foot Increments | Black Finish

  • EASY TO INSTALL - The Cable Drag Chain is easy to install and repair, free movement, low noise, wear-resistant, high-speed movement..
  • FEATURES - High wear resistance, high temperature resistance, salt resistance, acid resistance and alkali resistance.Due to the small spacing, the operation is particularly quiet and the noise is low..
  • APPLICATION - Widely used in 3D printers, CNC machine tools, electronic equipment, fire fighting machinery, stone machinery, glass machinery, door and window machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses, etc..
  • FAST MOVING SPEED - Very suitable for short distance light bearing condition.
Check Stock

Taytool 279182 Single Sheet 5/16 x 5 x 12 Dead Flat Float Plate Glass with 7 Sheets 3M (TM) Lapping Microfinishing Film for Scary Sharp Sharpening System

  • This set contains a single sheet of 5/16 x 5 x 12 dead flat float glass and 7 sheets of 3M lapping film 4-1/4 x 11 in the following microns sizes .3. 1,3,5,12,30 and 40.
  • 5/16 Float glass is dead flat and the perfect substrate to attach abrasive sheets.
  • Float glass will accommodate a half sheet of lapping film.
  • Lapping film has Pressure Sensitive Adhesive (PSA) backing with 3 mil high-strength polyester film backing to minimize tearing.
  • The Scary Sharp Sharpening Method is an approach to sharpening knives and woodworking tools that is fast, effective, consistent and very cost effective..
Check Stock

uxcell R28 15mm x 40mm (InnerH*InnerW) Black Plastic Wire Carrier Cable Drag Chain 1M Length for CNC

  • Internal Size: 15x40mm(0.59x1.574 inch)(InnerH*InnerW).
  • External Size: 20x49mm(0.787x1.929 inch)(OuterH*OuterW).
  • Change Size: You could link the cables with each other to form one long length you need..
  • Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
  • NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
  • The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection machines, robots, overweight transportation equipment, automated warehouses and so on..
Check Stock

uxcell R28 15mm x 20mm (InnerH*InnerW) Black Plastic Wire Carrier Cable Drag Chain 1M Length for CNC

  • Internal Size: 15x20mm /0.59"x0.787" (InnerH*InnerW).
  • External Size: 20x28mm/0.787"x1.1"(OuterH*OuterW)Bending radius: R28.
  • Change Size: You could link the cables with each other to form one long length you need..
  • Can not be opened.Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
  • NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
  • The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection machines, robots, overweight transportation equipment, automated warehouses and so on..
Check Stock

Sandblaster Gun Nozzles 10Pcs Tip Sand Blaster Replacement Cylinder Ceramic Abrasive Nozzles for Blasting (Pink)

  • Durable ceramic sandblast nozzle for injection of medium particles for rapid removal of paint, rust, corrosion and scale..
  • Mainly used for deep processing such as sandblasting and engraving of glass. Carving and processing of marble and other stones..
  • Suitable for sandblasting and derusting the surface of industrial machinery parts and castings such as machinery and metallurgical casting..
  • Can use a variety of sandblasted media such as glass beads, brown corundum, garnet, soda water, walnut shell..
  • Packing specification: ceramic nozzle*10..
Check Stock

Taytool 279205 Three Sheets 5/16 x 5 x 12 Deal Flat Float Plate Glass with 7 Sheets 3M (TM) Lapping Microfinishing Film 4-1/4 x 11 for Scary Sharp Sharpening System

  • This set contains three sheet of 5/16 x 5 x 12 dead flat float glass and 7 sheets of 3M lapping film 4-1/4 x 11 in the following microns sizes .3. 1,3,5,12,30 and 40.
  • 5/16 Float glass is dead flat and the perfect substrate to attach abrasive sheets.
  • Float glass will accommodate a half sheet of lapping film.
  • Lapping film has Pressure Sensitive Adhesive (PSA) backing with 3 mil high-strength polyester film backing to minimize tearing.
  • The Scary Sharp Sharpening Method is an approach to sharpening knives and woodworking tools that is fast, effective, consistent and very cost effective..
Check Stock

Taytools 279199 Two Sheets 5/16 x 5 x 12 Dead Flat Float Plate Glass with 7 Sheets 3M (TM) Lapping Microfinishing Film 4-1/4 x 11 for Scary Sharp Sharpening System

  • This set contains two sheet of 5/16 x 5 x 12 dead flat float glass and 7 sheets of 3M lapping film 4-1/4 x 11 in the following microns sizes .3. 1,3,5,12,30 and 40.
  • 5/16 Float glass is dead flat and the perfect substrate to attach abrasive sheets.
  • Float glass will accommodate a half sheet of lapping film.
  • Lapping film has Pressure Sensitive Adhesive (PSA) backing with 3 mil high-strength polyester film backing to minimize tearing.
  • The Scary Sharp Sharpening Method is an approach to sharpening knives and woodworking tools that is fast, effective, consistent and very cost effective..
Check Stock

Plastic Drag Chain Cable Carrier Closed Type with End Connectors R38 18 x 18mm L1000mm for Electrical CNC Router Machines

  • External Size: 23x28mm(OuterH*OuterW)；Bending radius: R38.
  • Change Size: You could link the cables with each other to form one long length you need..
  • Can not be opened.Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
  • NOTE: When the moving terminal is bent as "U" shape, the longer part will lay flat. Or the tail of the chain will bend upward..
  • The Drag chain has been widely used in CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses and so on..
Check Stock

Sunhokey 15x40mm 1-Meter Black Plastic Flexible Drag Chain Cable Wire Carrier Nested Semi Colsed Twist Chains for 3D Printer and CNC Machines (Inside Open) (15x40mm)

  • Easy to install and repair, free movement, low noise, wear-resistant, high-speed movement..
  • Reinforced nylon, low temperature resistance, wear resistance, corrosion resistance..
  • Surface gloss,Low temperature resistance, wear resistance and corrosion resistance..
  • Drag chains can be linked with each other to form one longer length you need..
  • Widely used for 3D Printers, CNC machine tools,electronic equipments, fire machinery, stone machinery, glass machinery, doors and windows machinery, counting devices, electrical machines, etc..
Check Stock

Heyiarbeit 10x11mm Plastic Cable Wire Carrier Drag Chain 1M R28 with End Connectors Open Type for Electrical Machines CNC Black 1Pcs

  • Size: 10mm x 11mm/0.39" X 0.43"(Inner H x Outer W).
  • 【CUSTOM LENGTH】- You can change the length you need by connecting multiple drag chains or splitting a single drag chain.
  • 【FEATURE】- The appearance of this cable carrier chain is beautiful,and surface gloss.
  • Reinforced nylon, reduces the noise of the cable chain while moving, while increasing wear resistance.
  • Our drag chain is resistant to low temperature, wear and corrosion.
  • 【ADVANTAGE】- Drag chain is designed to surround and guide flexible electrical cables and hydraulic or pneumatic hoses connected to moving automated machinery, they reduce wear and stress on cables and hoses, prevent entanglement.
  • The cable drag chain is easy to install and repair, free movement, low noise, wear-resistant, high-speed movement.
  • 【APPLICATION】- The drag chain suitable for a variety of automation equipment, such as CNC machine tools, electronic equipment, fire machinery, stone machinery, glass machinery, doors and windows machinery, injection molding machines, robots, overweight transportation equipment, automated warehouses and so on.
Check Stock