Top Flexible Schedule 4pvc Pipe Reviews

Klein Tools 50506SEN Flexible Pipe Capacity PVC Cutter with 1-3/8 and 3/4-Inch PVC Capacity

  • Makes clean burr-free cuts in PVC and flexible pipe.
  • Cuts 1-3/8-Inch O.D. flexible plastic pipe.
  • Replacement blade available (Cat. No. 50549).
Check Stock

(2" Dia. x 100 ft) - HydroMaxx® White Flexible PVC Pipe, Hose, Tubing for Pools, Spas and Water Gardens

  • Very Flexible, ideal for working in confined areas. Crush and impact resistant..
  • ATTENTION - Not for use in dead-head situations where there is constant (Static) pressure in the pipe.
  • True Schedule 40 PVC Pipe. Uses Standard Sch 40 Fittings and PVC Glue and can be connected to rigid PVC with ease.
  • Sun, ozone (UV) and chemical resistant, Coils easily for storage and transportation.
  • Smooth inside and out - permits unrestricted flow, reducing operating costs. Precisions outside diameter (standard IPS size) is designed to be glued into standard Schedule 40 PVC fittings..
Check Stock

(1 1/2" Dia. x 50 ft) - HydroMaxx® White Flexible PVC Pipe, Hose, Tubing for Pools, Spas and Water Gardens

  • Very Flexible, ideal for working in confined areas. Crush and impact resistant..
  • ATTENTION - Not for use in dead-head situations where there is constant (Static) pressure in the pipe.
  • True Schedule 40 PVC Pipe. Uses Standard Sch 40 Fittings and PVC Glue and can be connected to rigid PVC with ease.
  • Sun, ozone (UV) and chemical resistant, Coils easily for storage and transportation.
  • Smooth inside and out - permits unrestricted flow, reducing operating costs. Precisions outside diameter (standard IPS size) is designed to be glued into standard Schedule 40 PVC fittings..
Check Stock

Spears 1429 Series PVC Tube Fitting Coupling Schedule 40 Gray 1-1/2 x 1 Barbed

  • Fitting connects to schedule 40 PE pipe on both ends.
  • PVC for strength and resistance to reactions with acids, gasoline, alcohol, and hydrocarbons.
  • Barbed fitting creates a tight seal on flexible pipe when used with a hose clamp (sold separately).
  • Meets ASTM D 2609 standards for plastic insert fittings and certified by NSF for use with potable water.
Check Stock

Spears 1429 Series PVC Tube Fitting Coupling Schedule 40 Gray 3/4 x 1/2 Barbed

  • Fitting connects to schedule 40 PE pipe on both ends.
  • PVC for strength and resistance to reactions with acids, gasoline, alcohol, and hydrocarbons.
  • Barbed fitting creates a tight seal on flexible pipe when used with a hose clamp (sold separately).
  • Meets ASTM D 2609 standards for plastic insert fittings and certified by NSF for use with potable water.
Check Stock

Maxx Flex 2" x 100' HydroMaxx® Non Kink, Corrugated Flexible PVC Water Garden Pond Hose and Tubing - UL/US Size

  • Very Flexible, ideal for working in confined areas. Crush and impact resistant..
  • ATTENTION - Not for use in dead-head situations where there is constant (Static) pressure in the pipe.
  • True Schedule 40 PVC Pipe. Uses Standard Sch 40 Fittings and PVC Glue and can be connected to rigid PVC with ease.
  • Sun, ozone (UV) and chemical resistant, Coils easily for storage and transportation.
  • Smooth inside and out - permits unrestricted flow, reducing operating costs. Precisions outside diameter (standard IPS size) is designed to be glued into standard Schedule 40 PVC fittings..
Check Stock

Set of 3 - Advanced Drainage Systems 0664AA Downspout Adaptor, 6" x 4" x 6"

  • Plastic Universal Downspout to Drain Tile Adapter.
  • Universal coupling to fit INSIDE any 6" pipe including black corrugated landscape pipe, PVC SDR 28, 35, Schedule 40, clay & cast iron.
  • Size: Top inside dimensions: 6 1/8"x6 1/8" Bottom outside diameter: 5 3/4" that way it can easily fit INSIDE your 6" pipe.
  • The diameter of the round section is slightly smaller so it can fit INSIDE any 6" drain pipe you are going into..
  • Flexible tabs make it easy to secure into your drain pipe - Made for 6"x6" Downspouts - Proudly made in the USA!.
Check Stock

3/4 Inch Mallealbe Cast Iron Pipe, Pre Cut, Industrial Steel Black Fits Standard One Half Inch Black Threaded Pipes Nipples and Fittings, Build Vintage DIY Furniture, 10 Pack (16 Inch Length)

  • Schedule 80 PVC pipe is used for industrial and higher pressure water flow applications. Schedule 80 PVC pipe can handle 140 degrees F in temperature. The pipe comes in standard 1’ or 5’ sections and is available in plain end so a coupling is needed for installation. Pipe sizes range from ½” through 4”. Ease of installation and many application uses are just two great benefits of this pipe. Schedule 80 PVC pipe is designed to handle pressure applications as well as many chemical.
Check Stock

PVC Pipe Schedule 80 Industrial Grade Grey (.75) Grey/PVC - 1FT, Gray

  • Schedule 80 PVC pipe is used for industrial and higher pressure water flow applications..
  • Schedule 80 PVC pipe can handle 140 degrees F in temperature..
  • The pipe comes in standard 1’ or 5’ sections and is available in plain end so a coupling is needed for installation..
  • Pipe sizes range from ½” through 4”..
  • Ease of installation and many application uses are just two great benefits of this pipe..
Check Stock

Spears 1435 Series PVC Tube Fitting, Adapter, Schedule 40, Gray, 2" Barbed x NPT Female

  • Adapter for connecting pipes or fittings of different types.
  • Fitting connects to schedule 40 PE pipe on one end and has an NPT female connector on the other.
  • PVC for strength and resistance to reactions with acids, gasoline, alcohol, and hydrocarbons.
  • Barbed fitting creates a tight seal on flexible pipe when used with a hose clamp (sold separately).
  • Meets ASTM D 2609 standards for plastic insert fittings and certified by NSF for use with potable water.
Check Stock

Toledo Pipe 311 Carriage, 360 Cutter, 811A Die Head, 341 Reamer Kit fits RIDGID 300

  • 8 in. to 12 in. Schedule 10/40 Roll Set..
  • 918 Roll Groover with 300 power drive mount kit comparable to RIDGID Part Number: 48297.
  • Schedule 10 Steel, Stainless Steel Pipe Capacity: 2 in. to 12 in..
  • Schedule 40 Steel Pipe Capacity: 2 in. to 8 in..
Check Stock

Sealproof 1.5

  • . Successfully tested for toxicity by an independent laboratory for use in Aquaculture.Above and below ground installations.
  • For use with PVC Schedule 40 type fittings.
  • Use with Listed PVC solvent cements and primers.
  • Manufactured in the United States from high quality virgin PVC compound.
  • Less fittings required compared with PVC pipe.
  • Flexible PVC wall and cover for easy handling and installation.
  • FDA non-toxic formulation in compliance with IAPMO TSC 31-90.
  • Rigid PVC spiral resists crushing and impact.
  • Flexible for easy handling and installation.
  • All psi and va. rating are based on an open ended system at ambient temperatures.
Check Stock

Spears 1436 Series PVC Tube Fitting Adapter Schedule 40 Gray 1-1/2 Barbed x NPT Male

  • For use in connecting NPT pipe to schedule 40 PE flexible tubing in a straight run.
  • Barbed fitting creates a tight seal on flexible tubing when used with a hose clamp (sold separately).
  • Maximum working temperature of 140 degrees F.
  • PVC for strength and resistance to reactions with acids, gasoline, alcohol, and hydrocarbons.
  • Meets ASTM D2609 standards for plastic insert fittings and NSF 61 certified for use with potable water.
Check Stock