Top Flatbed Hubs And Spindles Reviews

The ROP Shop Trailer Axle Kit Assembly with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

  • Replacement Trailer Axle Kit Assembly with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (1) Idler Hub with Lug Nuts, (1) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (2) Inner/Outer Bearings, (1) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (1) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

The ROP Shop Pack of 4 Trailer Axle Kits with 4 on 4 Bolt Idler Hub & 1 Round BT8 Spindle

  • Replacement (Pack of 4) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (4) Idler Hub with Lug Nuts, (4) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (8) Inner/Outer Bearings, (4) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (4) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

The ROP Shop (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

  • Replacement (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (2) Idler Hub with Lug Nuts, (2) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (4) Inner/Outer Bearings, (2) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (2) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

The ROP Shop (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

  • Replacement (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (8) Idler Hub with Lug Nuts, (8) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (16) Inner/Outer Bearings, (8) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (8) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

Southwest Wheel R40842X 42 Spindle & 6-5.5\ Bolt Circle Trailer Hub

  • Pair of 1" straight spindles includes castle nuts and cotter pins..
  • Bearings included - (4) L-44643 1" inside dimension..
  • Hubs have pre-installed pressed in races..
  • Hub has a 4-bolt pattern on 4" bolt circle. Pilot diameter 2-1/2.
Check Stock

Southwest Wheel R20484X 84 Spindle & 5-4.5\ Bolt Circle Trailer Hub

  • Pair of 1-1/16" straight spindles includes castle nuts and cotter pins..
  • Bearings included - (4) L-44649 1-1/16" inside dimension.
  • Hubs have pre-installed pressed in races.
  • Hub has a 4-bolt pattern on 4" bolt circle. Pilot diameter 2-1/2.
Check Stock

Southwest Wheel R30484X 84 Spindle &5-4.5\ Bolt Circle Trailer Hub

  • Pair of 1-1/16" straight spindles includes castle nuts and cotter pins..
  • Bearings included - (4) L-44649 1-1/16" inside dimension..
  • Hubs have pre-installed pressed in races..
  • Hub has a 5-bolt pattern on 4-1/2" bolt circle. Pilot diameter 2-1/2.
Check Stock

Triton 02360 2200 Lb Snowmobile Trailer Torsion Axle

  • Adjustable spring mounts offer a variety of mounting positions.
  • Fast Lube spindles allow you to re-grease the bearings without removing the hubs.
  • Stainless steel wear sleeves prevent rust from wearing on the rubber oil seal.
  • 1.5in. square tube steel axle is hot dip galvanized with adjustable spring centers.
Check Stock

Southwest Wheel R30484X 84 Spindle & 5-5.5\ Bolt Circle Trailer Hub

  • Pair of 1-3/8" to 1-1/16" tapered spindles..
  • Bearings included - (2) L-68149 1-3/8" I.D & (2) L-44649 1-1/16" I.D.
  • Hubs have pre-installed pressed in races..
  • Hub has a 5-bolt pattern on 5" bolt circle. Pilot diameter 2.59.
Check Stock

RIGID HITCH INCORPORATED Pair of 4-Bolt On 4 Inch Hub Assembly (AKRD-200044) Includes (2) 1 Inch Straight Spindles & Bearings

  • Pair of 1" straight spindles includes castle nuts and cotter pins..
  • Bearings included - (4) L-44643 1" inside dimension..
  • Hubs have pre-installed pressed in races..
  • Hub has a 4-bolt pattern on 4" bolt circle. Pilot diameter 2-1/2.
Check Stock

NEW 2\ DROP SUSPENSION & WILWOOD BRAKE SET, SPINDLES, CURRIE REAR END & AXLES, POSI, 11\ DRILLED DISCS, BLACK CALIPERS, MASTER, BOOSTER, ARMS, 1968 1969 1970 1971 1972 CHEVELLE EL CAMINO CUTLASS GTO

  • Brand New Suspension and Brake Kit, with 2" Drop Spindles, for 1968-1972 GM A-Body Cars (Part # GMA6872X-K73) 003e This specific set features 2" Drop Spindles, Steering Arms, and Wilwood brakes with Drilled/Slotted Rotors and Black Calipers.
  • Includes: | Currie 9-Plus Notch-Back Rear End with 31 Spline Axles (Currie # CE-GMA6872X) | Southwest Speed 9" Ford Rear End Third Member with Posi Trac-Loc (SWS Part # 603-2078) | Southwest Speed 2" Drop Spindles (SWS Part # 103-9776) | Southwest Speed Steering Arms (SWS Part # 101-9652).
  • Wilwood Disc Brake Kit with Drilled Rotors and Black Calipers (Wilwood Part # 140-10996-D Front and # 140-140-11389-D Rear) | *** These Brake kits require at least 15" diameter wheels ***.
  • Front Brake Kit includes 003e Drilled/Slotted, .810" Thick x 11.00" O.D. Rotors 003e Forged Dynalite 4 Piston Calipers - Black 003e Caliper Mounting Brackets 003e BP-10 Brake Pads 003e Hubs, Bearings, Seals 003e All hardware to install | Rear Brake Kit includes: 003e Drilled/Slotted, .810" Thick x 11.00" O.D. Rotors with Hats 003e Low-Profile Dynapro 4 Piston Calipers - Black 003e Drum Parking Brake Assemblies with Caliper Mounting Brackets 003e Bearing Retainers 003e BP-10 Brake Pads 003e All hardware to install.
Check Stock

RIGID HITCH INCORPORATED Pair of 5-Bolt on 4-1/2 Inch Hub Assembly (AKSQ-2000545) Includes (2) Square Stock 1 Inch Straight Spindles & Bearings

  • Pair of 1" straight spindles includes castle nuts and cotter pins..
  • Bearings included - (4) L-44643 1" inside dimension..
  • Hubs have pre-installed pressed in races..
  • Hub has a 5-bolt pattern on 4-1/2" bolt circle. Pilot diameter 2.59.
Check Stock

GREENCHOOSY Golf Cart Club Car DS Front and Rear Fender Flares 4PCS for Club Car DS 1994-UP Gas/Electric Golf Carts with Metal Hardware

  • Includes aluminum hub, bearings, races, lug bolts, seal, and dust cover.
  • Installing these front wheel hubs will insure your wheels are spinning freely and offer less friction on the spindles..
Check Stock