Top Flat Flange Reviews

NDS 430 Pop-Up Drainage Emitter with Elbow and Adapter for 3 in. & 4 in. Drain Pipes, works with drainage systems including catch basins, Green Plastic

...lected from upstream and help protect property from water damage.
INSTALLATION: Connects to 3 in. & 4 in. single-wall corrugated and DWV/Sch. 40 pipes.
remove adapter to connect to 3 in. sewer & drain and triple-wall pipes.
Ensure cover flange is flush or slightly below adjacent turf to reduce potential for clipping cap with lawnmower.
UNIQUE ARCHITECTURE: The pop-up emitter cover consists of the pop-up cap and wide flange design that prevents turf overgrowth.
Underneath is an engineered crossbar design which helps maximize flow while flushing out debris.
Molded-in crossbar geometry along with internal ribs provide exceptional durability..
pops up as high as 1 in. once water pressure builds.
closes as flow diminishes. Flat profile design reduces trip hazard posed by open drain.
closed position keeps emitter flush to the ground.
install with cover flange flush or slightly below adjacent turf to reduce potential for clipping cap with lawnmower.

Check Stock

DONLAB REA-0073 2000ml/2L,24/40 Cylindrical Round Bottom Reaction Kettle Flask, Three-Neck Ground Glass Joints

Both the reaction lid and the lidless reaction kettle are 15 cm flat flange outer diameter.
The outer edge of the flange of the lid and the reaction kettle is about 9mm thick.
Borosilicate 3.3 glass ,it's heavy wall design.

Check Stock

M3-0.5mm Metric Stainless Steel Hex Nuts 100 of Pack Finished Hexagon Nuts 304 Stainless Steel 18-8

Package Included: 50 PCS M5 Serrated Flange Hex Locknuts.
Material: High Quality 18-8 Stainless Steel, great strength and good corrosion resistance to make fasteners last!.
Alternatives to one hexagon nut and anti-vibration washer..

Check Stock

DONLAB REA-0114 5000ml/5L Double-Layer Cylindrical Reaction Kettle Flask,Four-Neck T-Type with 24/40 Joints Cover

4 necks T-type/four 24/40 ground glass joints.
Both the reaction lid and the lidless reaction kettle are 15 cm flat flange outer diameter.
The outer edge of the flange of the lid and the reaction kettle is about 9mm thick.
Borosilicate 3.3 glass ,it's heavy wall design.

Check Stock

Henny Penny Seat Gasket

SSS style 913M, 316 stainless steel spiral wound gaskets with 316 stainless steel inner ring are a precision-engineered sealing solution for flat and raised face flanges and flanged joints.
Style 913M gaskets supplied by Sterling Seal & Supply Are also suitable for heat exchangers, boiler hand holes, manholes, and other high-temperature, high-pressure applications.
Gasket identification markings required by ASME B16.20 clearly etched in all gaskets. These gaskets excel in the prevention of flange erosion, inward buckling and reduction of turbulent flow.
Installation tip: spiral wound gaskets with internal or external guide Rings should be fully compressed to the guide ring. This will NOT damage the gasket or affect the sealing performance.
Installation tip: check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of Bolt lubrication is employed.

Check Stock

Vacuum Desiccator, Medium - 205mm (8.1\) I.D. - Borosilicate Glass Chamber, Lid & Stopcock - Porcelain Sieve Plate - Eisco Labs

Holds a full vacuum (740mm Hg 15cm) at room temperature for 24 hours - Will remain airtight even if not under vacuum.
Clear polycarbonate top on a chemical-resistant white polypropylene bottom.
Internal groove on the flange holds a silicone rubber O-ring (I.D.: 150 mm, Flange O.D.: 171 mm).
Fitted with a polypropylene stopcock with a self-lubricating PTFE plug which allows a controlled entrance of air preventing unnecessary turbulence.
‘Flat Dome,’ clear polycarbonate top with large ribbed knob which maximizes interior clearances.

Check Stock

Toilet Quality Controller (Background Score)

✔ PRODUCT DESCRIPTION: Universal Toilet paper holder with 1/2" npt (.8" O.D.) pipes. All pieces powder coated a glossy black. No oil and no rusting. Mounting screws (4) and anchors (4) included!.
✔ ADVANTAGES: This product uses quality 1/2” npt fittings, UNLIKE most of the other smaller (3/8” npt) products on the market. Use this product for any DIY Decorative or Design project-Have fun!.
✔ QUALITY FLANGES (3.4") are designed to mount completely Flat to the wall unlike many of the smaller diameter (2.7”) flanges. The larger flanges improve strength of your tp holder mount, because of the larger surface area of the flange mount..
✔ PREMIUM FINISH: The product is E-Coated Black, so there is no need to clean or degrease these parts. This coating also prevents corrosion- NO RUSTING!.
✔ WHATS INCLUDED: 1- Flange (3.4"), 1- Straight 1/2 npt pipe ( 6” long), 1- Elbows, 1-straight 1/2 npt pipes (2.25” long), 4- Black wood screws, 4- Drywall Anchors..

Check Stock

Sterling Seal 9000IR3304GR1500x24 304 Stainless Steel Spiral Wound Gasket with 304SS Inner Ring and Flexible Graphite Filler, Pressure Class 1500#, for 3\ Pipe, Yellow with Grey Stripe (Pack of 24)

Sterling Seal & Supply Style 9000IR - 304 Stainless Steel Spiral Wound Gaskets with 304SS Inner Ring are suitable for use with flat face and raised face flanges.
Gasket identification markings required by ASME B16.20 clearly etched in all gaskets. These gaskets Excel in the prevention of flange Erosion, inward buckling and reduction of turbulent flow.
Installation tip: spiral wound gaskets with internal or external guide Rings should be fully compressed to the guide ring. This will NOT damage the gasket or affect the sealing performance.
Installation tip: check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of Bolt lubrication is employed.

Check Stock

Desiccator Vacuum, 20cm - Silicone O-Ring - Polypropylene and Polycarbonate - PTFE Plug and Stopcock - Flat Dome - Autoclavable - 740mm Hg for 24 Hours - Eisco Labs

Holds a full vacuum (740mm Hg 20cm) at room temperature for 24 hours - Will remain airtight even if not under vacuum.
Clear polycarbonate top on a chemical-resistant white polypropylene bottom.
Internal groove on the flange holds a silicone rubber O-ring (I.D.: 200 mm, Flange O.D.: 232 mm).
Fitted with a polypropylene stopcock with a self-lubricating PTFE plug which allows a controlled entrance of air preventing unnecessary turbulence.
‘Flat Dome,’ clear polycarbonate top with large ribbed knob which maximizes interior clearances.

Check Stock

Nenesupply 19mm Flange Insert Compatible with Elvie Flange Pump Parts Elvie Stride Flange Medela Spectra Momcozy Flange Willow Reduce 24mm to 19mm Use as Elvie Inserts Medela Insert Momcozy Insert

CONTENT: 2pc 19mm NENESUPPLY Silicone Flange Inserts compatible with 24mm of Elvie flange, Elvie Stride flange, Momcozy flange, Medela flange (Personalfit Flex and Freestyle Hands-Free), Spectra flange, Willow flange, Willow Go flange, and Motif Luna flange. Reduce 24mm to 19mm. MADE BY NENESUPPLY. Compatible with Elvie pump parts accessories and Willow pump parts..
COMPATIBLE PUMPS: Work with 24mm FLANGES of most breast pumps in the market. See product photo for illustrations..
AVAILABLE IN 15, 17, 19, 21mm. MADE FROM SOFT SILICONE: Soft silicone makes pumping more comfortable. Reduce flange funnel to 19mm. Suitable for moms with smaller nipples. Correct flange sizes make pumping more efficient..
NO LOSS OF SUCTION- Embeded sealing circles creates a complete seal. EASY TO INSTALL & REMOVE - Easy to push in and pull out the inserts. Hassle-free.
EASY TO CLEAN: Dishwasher safe (top rack only). BPA and DEHP Free. FDA compliant for food contacts. Made by FDA regulation compliant manufacturer..

Check Stock

Fiebing's Improved Hoof Dressing Oil Conditioner for Horses Split Hooves, Corns, and Cracks

Used by Goat Owners for regular maintenance trimming – Different size animals requiring different trimming disc designs - Grooming show animals.
Eliminates struggling with hand tools - Trimmer designed to operate using one hand - Quickly remove the hoof flap and sole material – Easy to have flat hoof with the correct confirmation- Extremely dry hooves not a problem.
Set Includes: Battery Powered 20 volt Trimmer, 8-Tooth Cdisc, Silver Flat Disc Coarse Grit, Blue Flat Disc Medium Grit, Gold Flat Disc Fine Grit, 50 Grit Buffing Sander Disc Diamond Coated Chain File, Wrap Around Safety Glasses, Canvas Tool Bag, Print Instructions, Hex Key, Flange Holder.
Convenient, safe and easy to operate - Helps reduce pain in the wrist, hand, arm and back - Enjoy a smoother, pain free trimming experience.
Compatible with a DeWalt brand 20V Lithium-Ion Battery (BATTERY NOT INCLUDED) Compatible USA Model Numbers: DCB200, DCB201, DCB203, DCB204, DCB205, DCB206 – - Easy access - attaches to your belt, apron or toolbox via built-in clip..

Check Stock

12\x12\x1\ Ceramic Fiber Blanket Insulation 6# 2300F for Wood Stoves, Pizza Ovens, Kilns, Forges, Fireplaces & More - (6 Pack)

SSS style 913M, 316 stainless steel spiral wound gaskets with 316 stainless steel inner ring are a precision-engineered sealing solution for flat and raised face flanges and flanged joints.
Style 913M gaskets supplied by Sterling Seal & Supply Are also suitable for heat exchangers, boiler hand holes, manholes, and other high-temperature, high-pressure applications.
Gasket identification markings required by ASME B16.20 clearly etched in all gaskets. These gaskets excel in the prevention of flange erosion, inward buckling and reduction of turbulent flow.
Installation tip: spiral wound gaskets with internal or external guide Rings should be fully compressed to the guide ring. This will NOT damage the gasket or affect the sealing performance.
Installation tip: check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of Bolt lubrication is employed.

Check Stock

24\x24\x1\ Ceramic Fiber Blanket Insulation 6# 2300F for Wood Stoves, Pizza Ovens, Kilns, Forges, Fireplaces & More - (4 Each)

SSS style 913M, 316 stainless steel spiral wound gaskets with 316 stainless steel inner ring are a precision-engineered sealing solution for flat and raised face flanges and flanged joints.
Style 913M gaskets supplied by Sterling Seal & Supply Are also suitable for heat exchangers, boiler hand holes, manholes, and other high-temperature, high-pressure applications.
Gasket identification markings required by ASME B16.20 clearly etched in all gaskets. These gaskets excel in the prevention of flange erosion, inward buckling and reduction of turbulent flow.
Installation tip: spiral wound gaskets with internal or external guide Rings should be fully compressed to the guide ring. This will NOT damage the gasket or affect the sealing performance.
Installation tip: check that flange faces are clean and in good condition. Ensure correct bolting material is utilized to suit the operating conditions, and the use of Bolt lubrication is employed.

Check Stock