Top Flat Cut Off Wheels Reviews

Upgrade Your Auto Set of Four 16' Polished Stainless Steel 1 1/2' Deep Wheel Trim Rings

  • [MATERIAL] Double deck protective wheel hub, anti-collision and scratch proof, the outer layer is scraped. also helps to reduce future expenses for your four wheelers for restoration of your metal rim surface..
  • [High quality] Choice Silica gel material with high scalability, durable, not easy to fall off, can resist high temperature of more than 200?, more suitable for wheels than other products on the general market. Fits most wheels with a flat or round lip up to 24 inch ..
  • [UNIQUE DESIGN] Super Cool Looking Wheel Rim Protector Strips designed to protect your car rim edge and to cover existing damage. It also enhance the look of your wheel with bright colored inner strip..
  • [EASY TO INSTALL] Unique cut to radian fit mounting track and snap-in color insert fit all wheels from 13 inch to 22 inch that have 1/4 inch (6 mm) wide flat outer edge on the face of the wheel. Drive away at highway speeds immediately after installation..
  • [COOL AND MYSTERIOUS] Available in a variety of colors to custom personalize your vehicle. Match or complement your car body paint, vehicle graphics or caliper color. Color inserts can be swapped out in seconds to modify styling of your wheels..
Check Stock

Norton Blue Fire Small Diameter Reinforced Abrasive Flat Cut-Off Wheel Type 01 Zirconia Alumina and Aluminum Oxide 3/8 Arbor 3 Diameter x 1/16 Thickness Pack of 25

  • Zirconia alumina and aluminum oxide for up to twice the life of aluminum oxide wheels.
  • Type 01 wheels are straight (also called flat) cut-off wheels, and are used for peripheral grinding.
  • Small diameter wheels for use with horizontal and straight shaft grinders.
  • Reinforced design helps provide safety, strength, and straight cuts.
  • Resin bonds soften under the heat of grinding, releasing dulled abrasive grains.
Check Stock

S SATC 4 1/2 Cut Off Wheel 50 PCS Cutting Wheels 4.5 x.040 x7/8 Angle Grinder Cutting Disc Ultra Thin Metal & Stainless Steel

  • ☞LONGEST LASTING: Cut off wheels feature metal center and ultra-thin 0.040" thickness. 50 pieces cutting disc for metal & stainless steel meet ANSI safety requirements. Grinder Wheel Dimensions: 4 1/2"x0.040"x7/8".
  • ☞PERFECT ALUMINUM: 4 1/2 cut off wheel is made with a proprietary combination of alumina particles for aggressive cutting action, providing the industry's best balance of cut life, cut rate, cut accuracy, power requirements and heat build-up, to give you unmatched cut time, consistent precise integrity, moderate power requirements and relatively low heat build-up.
  • ☞FITS ANY ANGLE GRINDER: 50 PCS cut-off wheels for metal & stainless steel fast burr-free cutting feature 4 1/2"x0.040"x7/8" , compatible with Die Grinder, Air Cut Off Tool and Electric Cut Off Tool..
  • ☞MULTIPLE UESES: Cut off wheels 4 1/2 inch are designed for cutting fiberglass, steel, iron, plastic, stainless steel including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel , and other ferrous metals..
  • ☞Attention Please: Cutting disc is made in accordance. Before using these, please wear all applicable safety gear when using these discs (eyes/ears/face/hands/body/etc).
Check Stock

Norton Blue Fire Small Diameter Reinforced Abrasive Flat Cut-Off Wheel Type 01 Zirconia Alumina and Aluminum Oxide 3/8 Arbor 3 Diameter x 0.35 Thickness Pack of 25

  • Zirconia alumina and aluminum oxide for up to twice the life of aluminum oxide wheels.
  • Type 01 wheels are straight (also called flat) cut-off wheels, and are used for peripheral grinding.
  • Small diameter wheels for use with horizontal and straight shaft grinders.
  • Reinforced design helps provide safety, strength, and straight cuts.
  • Resin bonds soften under the heat of grinding, releasing dulled abrasive grains.
Check Stock

Dynabrade 52420 3-Inch 7-Degree Offset Cut-Off Wheel Tool

  • Cut-Off Wheel Tool, for efficient cutting of sheet metal, frame rails, clamps, bolts, etc.
  • 3-Inch Diameter, 7 Degrees Offset, 5 hp, 20,000 RPM, Front Exhaust.
  • Accepts optional 3-Inch diameter Type 1 Cut-Off Wheels.
  • Cut-off Wheel Tool, For Efficient Cutting Of Sheet Metal.
  • 3-inch Diameter, 7 Degrees Offset, 5 Hip.
  • Accepts Optional 3-inch Diameter Type 1 Cut-off Wheels.
Check Stock

Rotary Thread RTM7 Mandrel - Essential for Die Grinder Accessories & Cut-Off Wheels, 3/8" Arbor Hole & 1/4" Stem, Ideal for Holding Die Grinder Bits - Durable Metalworking Tool (2 Pack)

  • ESSENTIAL TOOL: A high-quality and effective tool is a must-have for anyone who wants to work with metal efficiently and safely.
  • PRECISION CUTTING: Holds cut-off wheels securely in place, allowing for precise and with greater efficiency, reducing time and effort for cutting, grinding, sanding, cleaning, or polishing.
  • UNIVERSAL COMPATIBILITY: The die grinder cut off wheel mandrel fits most Type 1 cut-off wheels with a 1/4" arbor hole, making it versatile accessory for use with a wide range of cut-off wheels.
  • IMPROVED SAFETY: The shank and screw are made of A3 carbon steel. It ensures secure attachment of cut-off wheels and reduces the risk of accidents or injuries due to wheel slippage.
  • HIGH-QUALITY, DURABLE and LONG-LASTING: The cutting wheel mandrel is made of A3 carbon steel with black plating, which is corrosion resistant to provide long life.
Check Stock

Norton Blue Fire Chop Saw Reinforced Abrasive Cut-Off Wheel Type 01 Flat Zirconia Alumina and Aluminum Oxide 1 Arbor 12 Diameter x 7/64 Thickness Pack of 1

  • Zirconia alumina and aluminum oxide for up to twice the life of aluminum oxide wheels.
  • Type 01 wheels are straight (also called flat) cut-off wheels, and are used for peripheral grinding.
  • Reinforced design helps provide safety, strength, and straight cuts.
  • Resin bonds soften under the heat of grinding, releasing dulled abrasive grains.
Check Stock

Norton Blue Fire Plus Right Cut Right Angle Grinder Reinforced Abrasive Flat Cut-Off Wheel Type 01 Zirconia Alumina 7/8 Arbor 6 Diameter x 0.045 Thickness Pack of 25

  • Zirconia alumina and aluminum oxide for up to twice the life of aluminum oxide wheels.
  • Type 01 wheels are straight (also called flat) cut-off wheels, and are used for peripheral grinding.
  • Reinforced design helps provide safety, strength, and straight cuts.
  • Resin bonds soften under the heat of grinding, releasing dulled abrasive grains.
  • The reinforcement reduces breakage and helps provide straight cuts.
Check Stock

Shark Industries PN-26-6 Die Grinder Cut-Off Wheels - 6 Pack, 3-Inch x 1/32 x 3/8 Shark Type-1 Double-Reinforced Thin Wheels, 54 Grit, Maximum RPM 25,000 (6 Cutting Discs)

  • Double-Reinforced Cutting Wheel - Weve double-reinforced our abrasive cut-off wheels with fiberglass to provide added durability and longevity.
  • Made in USA Cut-Off Wheels - You can trust the materials and the manufacturing process used for our abrasive cutting wheels, as they are made in the United States.
  • Perfect for cutting carbon steel, cast iron and general-purpose metal.
  • Made for Aggressive, High-Speed Cutting - Our wheel can spin at a maximum speed up to 25,000 revolutions per minute. For safety, be sure to use with a guard..
  • 6-Pack of Wheels - This kit has six wheels, so youll always have plenty of cut-off wheels on hand to finish the job and to start the next one!.
Check Stock

QLOUNI 36PCS Rotary Cutting Wheels Tool Kit, Mini Diamond Cutting Wheel and HSS Circular Saw Blades and Resin Metal Cutting Wheels Tools Wood Metal Stone Cutting with Mandrels

  • ★[Resin Cut Off Discs] With low heat generation and thin cutting line, the cut off wheels are applicable to electric drills, hanging grinders, electric grinders, etc. They can be used to cut metal, plastic, chassis modification, thin metal circuit board and DIY production after connected with mandrels, and are ideal for olive cutting..
  • ★[HSS Circular Saw Blades] The cut off saw blades are high speed steel and there are 5 kinds of outer diameters 22/25/32/35/44/50mm. They are suitable for cutting wood, plastic products, aluminum alloy, soft metal, etc..
  • ★[Diamond Cutting Wheels] The cutting wheels are made of high quality diamond. With high cutting efficiency, high durability, stable quality, etc., they are suitable for cutting gem, jade and glass..
  • ★[Great Tool for DIY] Compatible with most power rotary tools. The cutting wheel set for rotary tool is suitable for cutting wood, plastic, gem, glass, aluminum alloy and jade. They are a great tool as well as perfect gift for DIY hobbyists..
  • ★[Package Details] 36Pcs Rotary tool mini cutting discs sets include 20Pcs Resin Cutting Wheel Cut-off Discs, 6 Pcs Hss Circular Saw Blades, 10 Pcs Diamond Cutting Wheels. With 6 Pcs Mandrels..
Check Stock

Ridgid R63015 Spiral Cutter, 1-1/4-Inch, Silver

  • ✔ 2-WAY CUTTING - First ever siding brake cutter / Cut-off tool to 003cb003ecut003c/b003e effortlessly 003cb003ein both directions (right to left + left to right).003c/b003e -- Fits all Van Mark brakes and all Tapco PRO Series Brakes (1995 and after).
  • ✔ 1" OFFSET CUTS - Three cutting wheels make 003cb003eaccurate, clean and effortless003c/b003e cuts at 1" offset up yo 2 layers of aluminum coil stock or up to 24 gauge Stainless Steel..
  • ✔ STAYS ON THE BRAKE - With roller wheels, the 2-Way Cut-Off Tool is 003cb003eanchored to the brake's anvil.003c/b003e This allows it to travel the length of the brake to make a cut, and then later travel back the other way to make the next cut, while still attached to the brake..
  • ✔ TUCKS OUT OF THE WAY - This siding bender cut-off tool automatically retracts to fold on itself. By doing so, it does not interfere with the bending process..
  • ✔ LIGHTWEIGHT + QUALITY & DURABILITY - 003cb003eLightest003c/b003e portable siding bender 003cb003ecut-off tool003c/b003e in the industry (Half the weight) for easy handling - 003cb003eLong lasting003c/b003e heat treated and zinc plated cutting wheels - CNC machined and anodized body and tracking pulleys - 003cb003eHigh quality003c/b003e sealed roller bearings & stainless steel f....
Check Stock

Cutting Discs for Rotary Tool Diamond Metal Wood Cutting Wheels HSS Circular Saw Blades 6pcs with 1/8 Shank Resin Cutting Discs 20pcs 545 Diamond Cutting Wheels 10psc

  • ★ 10 pcs RESIN CUT OFF DISCS – With low heat generation and thin cutting line, the cut off wheels are applicable to electric drills, hanging....
  • ★ 6 pcs HSS CIRCULAR SAW BLADES – The cut off saw blades are high speed steel and there are 6 kinds of outer diameters 22/25/32/35/44/50mm and the....
  • ★ 10 pcs DIAMOND CUTTING WHEELS – The cutting wheels are made of high quality diamond. With high cutting efficiency, high durability, stable....
  • ★ GREAT TOOL FOR DIY – These cutting wheels are compatible with dremel rotary tools as good as original. We use original dremel rotary tools to....
  • ★ ★ QUALITY WARRENTY – We provides 3 months quality guarantee and lifetime after-sale service for every customer. We believe in our cutting....
Check Stock

Dremel EZ406-02, EZ - Lock Starter Kit, 1 1/2-Inch (38.1 mm) Wheel Diameter, 5 piece Fiberglass Reinforced Cut-off Wheels and EZ402 mandrel included, Rotary Tool Cutting Disc Accessories

  • Cut-off Wheels are reinforced with fiberglass for increased durability to cut, trim and groove into a variety of metals including hardened steel..
  • Ideal for easily cutting or slotting bolts, screws or sheet metal, thin wood, ceramic and plastic..
  • Dremel EZ406-02 includes one EZ402 EZ - Lock mandrel and five EZ456 Fiberglass reinforced cut-off wheels..
  • The EZ456 Cut-off wheels last 2X longer than current fiberglass-reinforced cut-off discs..
  • Working diameter: 1-1/2" (38.1 mm), Blade Thickness: .045” (1.1mm), Blade Material: Fiberglas.
  • For use with Dremel EZ402 mandrel only. The Dremel The EZ-Lock is the first patented system of its kind, eliminating the need for a screw and a screwdriver.
  • Dremel accessories are also color-coded into usage categories, to find more Cutting accessories look the Red color code..
  • USA-BASED CUSTOMER SERVICE – Available by chat, email, phone or visit us at our service center in Racine, WI..
Check Stock