Top Flat Countersunk Nib Bolts Reviews

Finishing Cup Washer Solid Brass Countersunk Finishing Washers #4 (0.159 ID x 0.379 OD x 0.082 Thick) Qty 100

  • Commonly used in Plumbing, Electrical and Finish Applications.
  • Commonly used with Countersunk Screws or Bolts such as Oval or Flat Heads to Create a Smooth Finished Look.
  • Available in Inch Sizes #4 through #14 (1/4").
  • Raised Washers to Run Flush with the Installed Screw Head.
Check Stock

Finishing Cup Washer Silicon Bronze Countersunk Finishing Washers #8 (0.205 ID x 0.538 OD x 0.104 Thick) Qty 100

  • Marine Grade Silicon Bronze Suitable for Harsh Environments - Including Salt Water.
  • Commonly used with Countersunk Screws or Bolts such as Oval or Flat Heads to Create a Smooth Finished Look.
  • Available in Inch Sizes #6 through #14 (1/4").
  • Raised Washers to Run Flush with the Installed Screw Head.
Check Stock

Finishing Cup Washer Black Oxide Stainless Steel Countersunk Finishing Washers #8 (0.205 ID x 0.538 OD x 0.104 Thick) QTY 100

  • Black Oxide 18-8 Stainless Steel Finishing Cup Washers.
  • Black oxide finish gives fasteners a sleek look while adding a layer of protection from abrasion.
  • Commonly used with Countersunk Screws or Bolts such as Oval or Flat Heads to Create a Smooth Finished Look.
  • Available in Inch Sizes #4 through #14 (1/4").
  • Raised Washers to Run Flush with the Installed Screw Head.
Check Stock

National Hardware N225-920 V514 Door Hinge in Stainless Steel

  • Stainless steel for maximum corrosion resistance.
Check Stock

National Hardware N276-949 V514 Door Hinges in Stainless Steel, 2 pack

  • Stainless steel for maximum corrosion resistance.
Check Stock

MEIYYJ M2 M2.5 M3 Hex Socket Flat Head Screw 304 Stainless Steel Hexagonal Countersunk Screws,Pack of 480

  • Made of 304 stainless steel which features is strength and offers good corrosion resistance in bad environment like high temperature, cold weather, and high humidity areas..
  • Fine workmanship, smooth surface without burrs, complete and deep thread, stressed uniformly, hard to slip, sturdy and durable..
  • 15 Kinds Hex Socket Flat Head Screw .It's convinient for you to meet different situations..
  • Widely used in the home and office appliance, communication equipment, electronics equipment, ship assembly and other machinery industry etc. fixing component, industrial and construction fasteners..
  • Total 300pcs screws and 180pcs nuts. All of bolts countersunk are packed in a durable and sturdy Box..
Check Stock

Anmas 30pcs M6 Length 20mm Furniture Joint Connector Bolt & Cap Nut Kit Use for Cot Bed Crib Bolts Hex Drive Socket Cap Bolts - Hex Socket Screws Head

  • Package Included: 30pcs x M6 Nut & Countersunk Bolt.
  • Used for: bed, table, chair, crib, or workbench, boards, cabinets, cupboards, other furniture.
Check Stock

uxcell 50Pcs Black M3 X 10mm Alloy Steel Hex Socket Flat Head Countersunk Screws Bolts

  • Package Content: 50(+/-2%)pcs x Hex Socket Flat Head Countersunk Screws.
  • Thread Size(d*L): M3x10mm/0.12"x0.39"(D*L).
  • Product Name: Hex Socket Flat Head Countersunk Screws.
Check Stock

uxcell M8x80mm 10.9 Carbon Steel Countersunk Head Hex Socket Screw 8pcs

  • Package Content: 8pcs x Countersunk Hex Socket Screws.
  • Product Name: Countersunk Hex Socket Screws.
Check Stock

Akozon 5pcs M3-M8 Pilot Slotting Counterbore Mould End Mill Cutter Solid Slot Countersink End Mill Drill Bit

  • 【Main purpose】: Countersunk end mill is a specially manufactured tool, mainly used to cut holes that allow bolts or screw heads to be screwed into..
  • 【High precision】: The cutting hole and bottom hole of this tool have high alignment accuracy. Because of its high production efficiency, it is often used in the machining industry..
  • 【High-quality and durable】: The Pilot Counterbore End Mill Cutters is made of hard high-speed steel, with high toughness, wear resistance, and high hardness for high-speed cutting.
  • it is usually used for assembly on a milling machine..
  • 【More time-saving】: Countersunk cutters reduce the time to change tools, improve the efficiency of machine actuator movement and save manufacturing time..
  • 【Wide range of applications】: Counterbore bit set is suitable for milling of copper, aluminum, steel, cast iron, etc., and can be directly processed or finely processed to heat treatments..
Check Stock

Vestil B-1213-4 Rubber Molded Dock Bumper, Rectangular, 13\ Height, 12\ Width, 4\ Depth

  • Loading dock bumper for preventing damage by a vehicle to dock or building.
  • 4" rubber padding for elasticity and resistance to impact.
  • Fabric-reinforced with nylon and polyester for strength and dimensional stability.
  • Pre-drilled countersunk mounting holes for easy installation.
Check Stock

100#8 Countersunk Finish Washer Black Zinc Plated Brass

  • Material:Made of high quality 304 Stainless Steel,corrosion resistant, sturdy and durable..
  • Shiny washer that allows the screw to recess into the center giving a clean,decorative presentation..
  • Finish washers are designed to accommodate the heads of a countersunk screw in order to provide a finished appearance..
  • Washers are great to have around for use in wood and wet environments.Washers are usually used where larger outside diameters are required to increase the bearing surface and reduce the surface load..
  • Package included:100pcs #8 Countersunk Washers.The washer is designed for flat head or oval head screws..
Check Stock

iexcell 250 Pcs Metric M3 x 6/8/10/12/16 Alloy Steel 10.9 Grade Hex Socket Flat Head Cap Screws Bolts Kit, Black Oxide Finish

  • 10.9 Grade Alloy Steel, Black Oxide Finish.
  • Head Diameter: 5.94mm/0.23",Thread Size(Dia.): 3mm.
  • Total Length(Include Head): 6mm/0.23", 8mm/0.31", 10mm/0.39", 12mm/0.47", 16mm/0.47".
  • Screw Head Style: Flat Head (Known as Countersunk Head).
  • Screw Drive Style: Hex Socket ( Known as Internal Hex ), Hex Size 2 mm.
  • Package: Total 250 Pcs Hex Socket Flat Head Cap Screws, 50Pcs Per Size, Come in an Easy-use Separated Girds Plastic Storage BoxDescription Machine Screws, 10.9 Grade Alloy Steel, Black Oxide Finish.
  • Easy to Store :These Screws Come in an Easy-use Separated Girds Storage Box.
  • ---Item------------Thread Length-------Total Length.
  • M3 x 6--------------4mm-------------------6mm.
  • M3 x 8--------------6mm-------------------8mm.
  • M3 x 10-------------8mm------------------10mm.
  • M3 x 12-------------10mm-----------------12mm.
  • M3 x 16-------------14mm-----------------16mm.
Check Stock