Top Flash Shoe Light Reviews

Anwenk Camera Flash Speedlite Mount Swivel Light Stand Bracket with Umbrella Reflector Holder for Camera DSLR Nikon Canon Pentax Olympus and Other DSLR Flashes Studio Light LED Light, 1Pack

Universal E Type Flash cold shoe bracket, Swivel light stand mount with Umbrella holder..
Universal metal cold shoe mount on top to mount your flash onto bracket.Work on monitor,ring light,Nikon Canon speedlite flash,trigger,magic arm,mic and any accessories that has a camera type of shoe..
A hole with locking screw in middle specially designed for holding umbrella..
Easy Adjustment. This Flash bracket is with 180° vertical and 360° horizontal adjustment to allow to position the umbrella and flash in different angle..
Comes with 1/4 inch to 3/8 inch screw adapter to attach it to a tripod or light stand or any camera rigs that with 1/4"-20 or 3/8"-16 male thread. Note: This flash bracket is not ideal for sony minolta godox shoe system..

Check Stock

Updated Anwenk Flash Cold Shoe Mount Adapter Flash Shoe Mount Flash Stand Adapter with 1/4\-20 Tripod Screw Thread for Camera Flash Nikon Canon Olympus Panasonic Speedlite Flash, 2Pack

Updated Cold Shoe Flash Stand Adapter. Work on monitor,ring light,Nikon Canon speedlite flash,trigger,magic arm,mic and any accessories that has a camera type of shoe..
Updated: NO SPRING. Never have to worry about the springs falling out again. That makes your expensive flash be held tightly and safely not by the springs lock, but your hot shoe locking wheel.(Your accessories should have hot shoe locking wheel in order to lock down to this cold shoe mount)..
Universal 1/4" Tripod Screw -Metal cold shoe to mount your flash onto bracket or tripod/light stand..
Smart Design - With a stop screw on the shoe mount adapter to prevent shoe mount accessories from accidentally sliding forward and keep your accessories silde Perfectly in right place..
Material: Metal construction with black anodized for higher durability..

Check Stock

Anwenk Camera Flash Stand Flash Speedlight Hot Shoe Mount Stand with 1/4\ Metal Tripod Thread for Flash Speedlight Speedlite, Compatible with Canon Nikon Sigma Olympus Panasonic Pentax 4 Pack

Universal Camera Hot Shoe Flash Stand for dslr camera, Compatible with Canon Nikon Sigma Olympus Panasonic Pentax Nissin Sunpak etc Flash, Speedlight (not for Sony)..
With 1/4" Metal Tripod Thread on the bottom for mounting on a tripod or light stand.(Tripod/Light stand is not included)..
A locking hole on the hot shoe flash stand perfectly matches the locking pin to allow the Speedlight to lock on the light stand..
Dimensions: 95 x 63 x 12mm (3.7" x 2.5" x 0.5").
Package includes 4pcs of camera hot shoe flash stands.Tip: If you will need it to support your flash at an angle, we suggest you can choose our metal cold shoe mount for angled position for better protection- Search"B07MZJRTH4" or "B076FTW8YG"..

Check Stock

JINTU Dual Hot Shoe Flash Speedlite Bracket Stand Umbrella Holder Adapter with 1/4' 3/8' Screw Mount for Canon Nikon Yongnuo Godox Flash Speedlite Video Camera Camcorder

- Dual hot shoes adapter, universal for flash with standard hot shoe mount..
- Standard 1/4 inch screw can connect many flash lights directly, which is convenient for photographers to use the flash to make multi-directional fill light when shooting outside..
- Built in umbrella socket, and the angle of the flash can be adjusted 180 degrees, perfect for holding your photo umbrella..
- Universal cold shoe mount compatible with Canon, Nikon etc most DSLR cameras and other flashes with standard shoe mount or video LED light, studio light..
- Aluminium alloy made, sturdy and durable..

Check Stock

Introduction to Flash Photography

Altura Photo Softbox Flash Diffuser for Shoe Mount Flash Units..
EVEN LIGHTING: Reduces harshness and softens shadows. Features an additional internal diffuser for better wrap around light..
SIMPLE AND COMPACT: Integrated hook and loop fastener strap secures around the flash head. Folds down flat when not in use..
ONE SIZE FITS ALL: Compatible with most shoe mount flash units (including Canon Nikon Sony Olympus and more). Product Dimensions 6" x 5".
SATISFACTION GUARANTEED: Backed by Our 90-Day Satisfaction Guarantee..

Check Stock

ChromLives Camera L Bracket Mount Video Grip L-Bracket with Dual Flash Cold Shoe Mount 1/4'' Tripod Screw, Heavy Duty Padded Hand Grip for DSLR Camera Camcorder (Updated)

This is a heavy duty photography video camera L bracket with dual flash cold shoe mounts,1/4” thread hole on top,and 1/4” tripod screw on base plate for any standard camera or camcorder.This camera L bracket allows you to attach a light source to the hot shoe, which sets the light source away from the camera. This helps reduce red eye and reduce harsh shadows..
REMOVABLE COLD SHOES-This L bracket is updated with two solid removable flash shoe mounts for added light source, Far exceeds the built-in shoe mount version which will risk your delicate flash/monitor to slide off. Provides an economical way to do both horizontal and vertical flash..
UNIVERSAL 1/4” SCREW- Updated with an extra 1/4” screw hole between the two cold shoe mount for more configuration. Comes with a 1/4”-20 thumb screw to connect your camera camcorder,action camera etc,. 1/4” threaded hole on the bottom of the thumb screw.
ERGONOMICS HAND GRIP- Smart padded hand grip design for easy holding. Strong construction..
SOLID MADE- The l shape bracket is made of high quality aluminum metal and padded grip is made of hard plastic. Heavy duty and strong..

Check Stock

Opteka BC-10 Universal Double-Sided 7.5 X 4-Inch Bounce Card for External Camera Flashes

DEDICATED - The Digitalmate 130N dedicated flash is a flash unit that fits into your camera's hot shoe. The dedicated flash is a great piece of gear that communicates with the camera. A dedicated flash is a far better tool than the built-in flash because of the versatility it gives you..
AUTOFOCUS - The Digitalmate flash provides an independent AF assist. When a flash is mounted to the camera, the AF Assist option is enabled. The normal AF Assist light will not be used, instead the flashes autofocus assist system will take effect..
TTL - The flash and ambient light are reflected by the subject through the camera lens and then metered by the camera's TTL metering system. The flash power is adjusted accordingly. A digital camera TTL flash system, often known as E-TTL, involves firing a pre-flash before the actual exposure.
QUICK SPECS - Full TTL dedication, Backlit LCD screen, Guide number: 130 ft. (40m), Power save mode, Auto temperature control (overheat protection), Fine brightness control, Metal hot shoe, Rapid recycle time (0.2-6 seconds), Works on 2 AA batteries, Memory function (retains previous setting after restart).
COMPATIBILITY - NEX 3, NEX 3N, NEX 5, NEX 5T, NEX 5R, NEX 6, NEX 7, A5000, A5100, A6000, A6100, A6300, A6500, A9 APS-C Digital SLR C....

Check Stock

QYXINC Camera Hot Shoe Mount Adapter Flash Shoe Mount to 1/4\ Tripod Screw Adapter 2Piece, Metal Cold Shoe Flash Stand Adapter with 1/4-inch -20 Tripod Screw 2Piece

Flash hot shoe mount with 1/4"-20 tripod screw adapter, fit on anything else that has a 1/4"-20 thread hole(such as microphone, LED light, monitor, camcorder or digital camera)..
Metal cold shoe with 1/4"-20 threaded hole is suitable for the 1/4" thread tripod or light stand. Work with Canon/ Pentax/Nikon speedlite flash, trigger, monitor and any accessories that has a Universal camera shoe..
Easy to use. Hot shoe and Cold shoe combo pack.
High quality Aluminum Alloy, sturdy and durable..
Package Includes 2x Hot shoe mount adapter003cbr003e 2x Cold shoe mount adaper.

Check Stock

SUPON Flash Bracket U-Shape,180° Adjustable Swivel Umbrella Softbox Holder with 1/4 to 3/8 Screw &Nut Adapter and Cold Shoe Mount for DSLR Cameras,Speedlites,Tripod,Light Stand,Studio,LED Light

Special Design- This flash bracket can attach on your light stand and flash light, insert your photography umbrella or Softbox and adjust your angle....
Umbrella/Softbox Mount Bracket- A hole with locking screw in middle specially designed for holding umbrella or softbox. Allows 180° swivel to adjust....
1/4" To 3/8" Screw&Nut Adapter- The detachable 1/4" to 3/8" screw socket at the bottom, which can be converted by yourself, allow the U shape flash....
Cold Shoe Mount Bracket- Come with a cold shoe mount on top design fits DSLR camera flash speedlites or video LED light, studio light, monitor, ring....
Durable- The flash bracket is made of whole aluminum alloy,durable and solid to use..

Check Stock

Chromlives Cold Shoe Mount Hot Shoe Mount Adapter 1/4'' Hot Shoe Flash Shoe Mount for DSLR Camera Flash Shoe Mount, Combo 4 Pack

2Pack Hot Shoe Mount- This hot shoe adapter permits any devices with standard 1/4" screw hole to be installed on a flash hot shoe slot..
2Pack Cold Shoe Mount- Sturdy and adjustable metal flash shoe mount adapter that fit into the 1/4" thread tripod or light stand..
They are standard shoe type and 1/4"-20 screw thread, fit for any standard camera shoe and screw..
Package includes 2pcs of hot shoe adapter and 2pcs of cold shoe adapter..

Check Stock

3PCS Camera Flash Stand Speedlight Hot Shoe Mount Stand, with 1/4\ Metal Tripod Thread for Speedlite Canon Nikon Sigma Pentax Olympus Panasonic Metz Nissin Yongnuo

Black Hot Shoe Flash Light Base Mount Stand Holder..
Compatible with Canon Nikon Pentax Sigma Olympus Panasonic Yongnuo Metz Flash Light, Flashgun.(Note:this adapter don't fit Sony and Minolta flash ).
Has the same little hole in the slot so that the locking pin on the Speedlight will lock onto the stand.1/4"-20 screw thread in the base, can be mounted on camera tripods..
Package Included: 3 x Flash Light Hot Shoe Base Stand Holder Mount. Size: 9.2 x 6.2 x 0.9cm (3.6 x 2.4 x 0.35in).

Check Stock

Neewer Professional Universal E Type Camera Flash Speedlite Mount Swivel Light Stand Bracket with Umbrella Holder for Canon Nikon Pentax Olympus and Other Flashes Studio Light LED Light 3 Pack

Flash cold mount shoe bracket, Light Stand Mount with Umbrella Holder.
Top cold shoe clip design fits most Canon, Nikon and other flashes with standard shoe mount or video LED light, studio light(Note:this adapter does....
A hole specially designs for holding umbrellas,180° vertical and 360° horizontal adjustment.
Mount with 1/4 inch to 3/8 inch screw adapter to attach it to a tripod or light stand.
Note: Light stand, speedlite flash and umbrella are not included.

Check Stock

Flash Hot Shoe Mount Adapter to 1/4 Thread Hole with 1/4\-20 Male to 1/4\-20 Male Tripod Screw Adapter for Flash Holder Bracket Light Stands Umbrella Holder Flash Bracket,Strong and Solid (Update)

Flash hot shoe to 1/4" thread (Updated Solid Metal Connection Base), Support Canon Nikon Pentax Olympus Metz Sigma Nissin Speedlite.Note: May Not Work for Sony Flash..
1/4" brass nut in the bottom,work for light stands/ flash holders with 1/4" screw head..
Designed with cold foot, Standard hot shoe support most flash, applicable to Canon Nikon Pentax Olympus Metz Sigma Nissin Flashes.
Comes with 1/4"-1/4" male to male screw for your varied configuration..
Package Includes 1x flash hot shoe mount adapter( Updated).
1x 1/4"-1/4" screw. 100% Money Back..Note: Camera, flash , umbrella holder and tripod are not included..

Check Stock