Top Flash Module Reviews

ARRIS Explorer280 Long Range Long Flight Time FPV Drone RTF w/HD Camera and GPS …

  • ARRIS Explorer280 long range drone comes with X280 frame, arris x2206 1500kv high efficiency motor, 3-4S simo BLHeli_S ESC, Gemfan 7045 two blade....
  • Gemfan Flash 7042 7 Inches 2 Blade Propeller..With light blade and less moment of inertia, Gemfan flash series propellers have smooth turning....
  • ARRIS 30A 2-4S BLHeli_S brushless esc is specially designed for fpv racing drones. It support oneshot, multishot and dshot300 protocals. Fast response....
  • BN-880 Flight Control GPS Module Dual Module Compass. With it,you can switch the mode to one key return to home. Foxeer Pagoda Pro 5.8G mini antenna.....
  • Foxeer HS1177 V2 2.8MM Mini FPV Camera.It is one of the most popular mini camera all over the world.Foxeer HS1177 V2 has compact size, vivid color....
Check Stock

64GB USB Flash Drive and Outlet Wall Mount for Blink Sync Module 2,Mounting Bracket Holder with Short Cable for All-New Blink Outdoor Indoor Home Security Camera Sync Module No Messy Wires or Screws

  • 【64GB USB Flash Drive】The outlet mount comes 64GB flash drive to expand local storage.Designed for Original Blink Sync Module and Blink Sync....
  • 【Neat & Tidy】The included short usb cable helps you get rid of the messy wires, it works well with the original blink power plug..
  • 【Flexibility】You can mount your Blink Sync Module 2 to anywhere with AC outlet in your home, easily move it from one place to another..
  • 【Easy Installation】Just install your Blink Sync Module 2 in seconds. No drilling holes, no screws or any tools needed, no any wall damages to your....
  • 【Lifetime Service】ALERTCAM provides Lifetime warranty. Any problem, just feel free to contact us, we'll reply to you within 12hours and spare no....
Check Stock

AITRIP 5 PCS ESP8266 NodeMCU V3 CP2102 ESP-12F 4M Bytes Internet of Things WiFi Development Board Serial Wireless Module for Arduino IDE Micropython

  • There is the way to guide you to use the new version: The command you needed to use is: esptool.py --baud 115200 --port /dev/tty.SLAB_USBtoUART write_flash -fs 32m -ff 80m --flash_mode dio 0x00000 boot_v1.7.bin 0x1000 user1.bin 0x37c000 esp_init_data_default.bin 0x37e000 blank.bin The important part is “—flash mode dio”.
  • ESP8266 CP2102 NodeMCU LUA ESP-12F WIFI Serial Wireless Module.
  • Compatible with Arduino, works great with the latest Compatible with Arduino IDE/Mongoose IoT/Micropython.
  • SP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor..
  • 5pcs ESP8266 CP2102 NodeMCU LUA ESP-12F WIFI Serial Wireless Module.
Check Stock

256GB Blink USB Flash Drive for Local Video Storage with The Blink Sync Module 2 Mount Blink Add-On Sync Module 2 is NOT Included …

  • 【Lightweight Flash Drive】Made of high-quality alloy with 256GB capacity, plug and play, more convenient to view, share, and download locally....
  • 【Neat and Save Space】With this compact outlet mount, your Blink Sync Module 2 installation is more neat and clean than before. The extra custom....
  • 【No Drilling or Tools Needed】Requires no tools, screws or drilling in your walls. You can install your Blink Sync Module 2 in seconds. No damage....
  • 【Flexible Installation】Allowing you to move from one place to another easily. Any open AC outlet can be a perfect place to hold the sync module.....
  • 【Secure and Stable】Made of high quality hard plastic, hold and protect your Blink Sync Module 2 stably with buckle design. (The Blink Sync Module....
Check Stock

AITRIP 5 PCS ESP8266 NodeMCU CP2102 ESP-12E Internet WiFi Development Board Open Source Serial Wireless Module Works Great Compatible with Arduino IDE/Micropython (5PCS)

  • There is the way to guide you to use the new version: The command you needed to use is: esptool.py --baud 115200 --port /dev/tty.SLAB_USBtoUART write_flash -fs 32m -ff 80m --flash_mode dio 0x00000 boot_v1.7.bin 0x1000 user1.bin 0x37c000 esp_init_data_default.bin 0x37e000 blank.bin The important part is “—flash mode dio”.
  • ESP8266 CP2102 NodeMCU LUA ESP-12E WIFI Serial Wireless Module.
  • Compatible with Arduino, works great with the latest Compatible with Arduino IDE/Mongoose IoT/Micropython.
  • SP8266 is a highly integrated chip designed for the needs of a new connected world. It offers a complete and self-contained Wi-Fi networking solution, allowing it to either host the application or to offload all Wi-Fi networking functions from another application processor..
  • 5pcs ESP8266 CP2102 NodeMCU LUA ESP-12E WIFI Serial Wireless Module.
Check Stock

E27 150W Warm White Studio Modeling Strobe Flash Light Lamp Bulb 220V

  • Description: E27 250W Warm White Studio Modeling Strobe Flash Light Lamp Bulb 220V Type: Flash Light Bulb Wattage:150W Input Voltage: AC 220V Color of Bulb: Warm White Color temperature: 3000K Socket: E27 Features: No noise This bulb is fit for professional Photography and Video studio. Made by high quality flash module. This 150W studio light modeling lamp is a good equipment for photography. This small bulb that produce a large amount of light. It comes with E27 socket, suitable for any lig.
  • ht holder with E27 socket. It has an outside glass casing to protect it and make it safe for handling. Package Included: 1 x Flash Light Bulb.
Check Stock

ACEIRMC 2pcs ESP32-CAM WiFi Bluetooth Camera Module Development Board ESP32 with Camera Module OV2640 2MP for Arduino (4pcs)

  • The ESP32CAM is a tiny module based on ESP32 chip and OV2640. You can even program the ESP32CAM through the ESP-IDF by installing the ESP32 Core.
  • ESP32-CAM WiFi Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MP for Arduino, Support Image WiFi Upload and TF Card.
  • Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC.
  • Support OV2640 and OV7670 cameras, built-in flash.
  • Support image WiFi upload and Support TF card.
  • Bluetooth: Bluetooth 4.2 BR/EDR and BLE standard.
  • Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module.
Check Stock

JacobsParts WT32-ETH01 ESP32 Module Ethernet WiFi Bluetooth Development Board 100Mbps RJ45

  • The issue with the top soldered pins has been resolved, they are now shipping with separate unsoldered pins WT32-ETH01 is an embedded serial to Ethernet module based on the ESP32 series WT32-S1 MCU. The module integrates an optimized TCP/IP protocol stack, which is convenient for users to easily complete the networking functions of embedded devices while reducing development time cost. In addition, the module is compatible with half-pad and through-hole connectors..
  • The board width is a universal width and therefore, it can be directly soldered to boards, connectors, or even breadboards, which is convenient for users to use in different scenarios..
  • ESP32 series IC is an integrated 2.4GHz Wi-Fi and Bluetooth dual-mode SOC, with ultra-high RF performance, stability, versatility and reliability, as well as ultra-low power consumption..
  • ESP32 Module: WT32-S1 240MHz dual core microprocessor 4MB SPI flash memory Oboard 10/100Mbps RJ45 Ethernet (LAN8720A PHY) 802.11n WIFI Bluetooth 4.2.
Check Stock

MP3 WMA Decoder Board Audio Wireless Bluetooth 4.2 Module 12V, USB/SD Card/Bluetooth/FM Switching Support

  • [BLUETOOTH 4.2 SUPPORT]The mp3 module support Bluetooth 4.2. With blue backlight function, it support USB sound card function and Micro USB 5V power input. And also has power off memory function---memorize playing songs and volume before power off..
  • [SUPPORT FOLDER SELECtION FROM secure digital memory card OR USB DISK ]The mp3 module support folder selection and then music playback (remote control operation or panel operation) from secure digital memory card or USB disk..
  • [USB/SD CARD/BLUETOOTH/FM SWITCHING SUPPORT]The mp3 module support USB/SD card/Bluetooth/FM switching. Conversion prompt (Signal, Chinese, English voice prompt optional)..
  • [MULTIPLE MUSIC FORMATS SUPPORT]The decoder supports MP3/WMA/WAV/lossless APE/FLAC format music. MP3 Songs: 2-320kbps, WAV/WMA: 1411kbps and below..
  • [MULTI-FUNCTION SUPPORT]The mp3 module support secure digital memory card / USB flash switching, songs selection, volume adjustment, EQ, play /pause, stop, mute, shutdown, direct election song..
Check Stock

HiLetgo 3pcs ESP32 Mini ESP-WROOM-32 Development Board WLAN WiFi Bluetooth IoT Development Board

  • ESP32 Mini development board, everything needed to program the ESP32 module, ESP32/32S WIFI Development Bluetooth ESP8266 Module CP2104 for Arduino IDE..
Check Stock

Blink Add-On Sync Module 2

  • Conveniently control all of your Blink devices right from the Blink Home Monitor app with the Blink Sync Module 2. The Sync Module 2 connects up to 10....
  • Supports local video storage for up to 10 Outdoor, Indoor, Video Doorbell and Mini devices. Record and store motion clips when you insert a USB flash....
  • View, share, and download locally stored motion alerts from Outdoor, Indoor, Video Doorbell and Mini devices through the Blink app anytime or watch....
  • No monthly fees are required to use local video storage functionality. Local video storage functionality is not compatible with Blink XT2, XT, and 1st....
Check Stock

Peanut Butter SmartSticks 3 Pack Bundle

  • LATEST Z-WAVE TECH: SmartStick+ Includes a 700 Series Z-Wave Module (v7.17x firmware) and is Z-Wave Plus V2 Certified.
  • SUPPORTS Z-WAVE S2 SECURITY: Includes Smart Start Inclusion (Requires Smart Start Compatible Hub or Software).
  • Z-FLASH COMPATIBLE: Works Nicely with HomeSeer Z-Flash OTA Firmware Updater.
  • Z-WAVE PLUS (V2) PERMORMANCE: Longest Range, Fastest Transmission Speed, Best Bandwidth.
  • SUPPORTS NETWORK BACKUP & RESTORE: Easily restore or move your network to another SmartStick+ (requires HomeSeer hub).
Check Stock

Brake Light Flasher Strobe Brake Light Strobe Tail Light Strobe Brake Flasher LED Flash Module Flash Strobe Controller for Motorcycles Cars Trucks Brake Light Tail Stop Light 12-30 V (8 Pieces)

  • ...s of flash strobe controllers and 8 pieces of double sided adhesive tapes in the package, which can alert the vehicles behind you to stop to avoid rear-end accidents when driving blocked roads.
  • Sending them to your friends and family members is also a good option.
  • 2 Flash speeds: when braking, this brake light flash module can first fast-blink 4 times and then slow-blink 4 times, and finally stay in the original steady light when flashing is completed, which can warn your following drivers when you stop with a catchy blinking light.
  • Serviceable material: the car flasher modules are made of quality ABS material, sturdy and reliable to use, not easy to wear or tear, can be kept and applied for a long time.
  • They also adopt complete sealed technology, which can protect modules from water and avoid short circuit, giving you a satisfactory using experience.
  • Simple installation: the flash module measures about 4.8 x 2.7 x 1.4 cm/ 1.89 x 1.06 x 0.55 inches, 15 cm/ 5.9 inches in wire length, and comes with double sided adhesive tapes for easy installation.
  • You only need to connect red wire to positive pole, and black wire to negative pole, very easy and convenient, and it's suggested to install it in the third brake light.
  • Wide range of applications: these car br....
Check Stock