Top Flash Mcu Reviews

DORHEA 10PCS ESP-WROOM-32D ESP32 Bluetooth and WiFi Low Power Module integrates ESP32-D0WD Generic Wi-Fi+BT+BLE MCU Modules for Voice Encoding Music Streaming and MP3 Decoding

  • ESP32-WROOM-32D are powerful, generic Wi-Fi+BT+BLE MCU modules that target a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming and MP3 decoding..
  • The sleep current of the ESP32 chip is less than 5 µA, making it suitable for battery powered and wearable electronics applications..
  • ESP32-WROOM-32D integrate a 4 MB of external SPI flash. The integrated SPI flash is connected to GPIO6, GPIO7, GPIO8, GPIO9, GPIO10 and GPIO11. These six pins cannot be used as regular GPIOs..
  • Flash integrated on the module and are not recommended for other uses..
Check Stock

HiLetgo BTS7960 43A High Power Motor Driver Module/Smart Car Driver Module for Arduino Current Limit

  • 5V isolate with MCU, and effectively protect MCU.
  • Voltage indication of motor driver output end.
  • Just need four lines from MCU to driver module (GND. 5V. PWM1. PWM2).
  • isolation chip 5 V power supply (can share with MCU 5 V)..
  • Able to reverse the motor forward, two PWM input frequency up to 25kHZ.
  • two heat flow passing through an error signal output..
  • Isolated chip 5V power supply (can be shared with the MCU 5V), can also use the on-board 5V supply.
Check Stock

Google Coral USB Edge TPU ML Accelerator coprocessor for Raspberry Pi and Other Embedded Single Board Computers

  • Specifications: Arm 32-bit Cortex-M0+ Microprocessor (MCU): Up to 32 MHz max 16 KB Flash memory with ECC 2 KB RAM Connections: USB 3.1 (gen 1) port and cable (SuperSpeed, 5Gb/s transfer speed).
  • Features: Google Edge TPU ML accelerator coprocessor, USB 3.0 Type-C socket, Supports Debian Linux on host CPU, Models are built using TensorFlow. Fully supports MobileNet and Inception architectures through custom architectures are possible. Compatible with Google Cloud..
Check Stock

Happymodel Mobula6 Quadcopter Indoor Four-axis 1S 65mm Brushless Bwhoop Drone BNF AIO 4IN1 Crazybee F4 Lite Flight Controll Built-in 5.8G VTX Parts Without Remote Controller (25000KV Frsky RX)

  • Flight controller: (Frsky SPI RX version) CRAZYBEE F4 Lite Frsky version Firmware target: CrazybeeF4FR.
  • (Flysky SPI RX version) CRAZYBEE F4 Lite Flysky version Firmware target: CrazybeeF4FS.
  • Onboard 4in1 ESC: MCU upgraded to EFM8BB21.
  • Current: 5A continuous peak 6A (3 seconds).
  • OnboardFrsky SPI D8 receiver Version: SPI BUS receiver Frsky D8 compatible.
  • No ground interference ( Transmitter and receiver 1 m from the ground): 100m~200m.
  • OnboardFlysky SPIreceiver Version: SPI BUS receiver.
  • No ground interference ( Transmitter and receiver 1 m from the ground): 100~200m.
Check Stock

FUERAN DP - DisplayPort Display Emulator EDID Emulator Plug 4K fit Headless 4096x2160@60Hz

  • Supports maximum 4096*2160 60HZ, default 1920*1080P 60HZ, 4K regular 3840*2160 60HZ, minimum 800*600..
  • Embedded MCU and SPI flash, can better communicate with the device, so that it can play the maximum efficiency, working state micro heat..
  • EDID smart lock screen, Set parameters good after， in Not messy at next boot. Support hot plug technology HPD and HDCP1.4, 2.3 protection..
  • Support DP1.1a, 1.2a, 1.3, 1.4 input formats, HDMI 2.0 transmitter, up to 6.0Gbit / sec per TMDS data channel.
  • HDMI 2.0 is supported up to the allowable maximum TMDS date rate of 6Gbit/sec, enabling 4K UHD video at 60 frames per second in 4:4:4 video mode at 24....
Check Stock

StarTech.com 1 Port RS-232 Serial to IP Ethernet Device Server - DIN Rail Mountable - Serial Device Server - Serial Over IP Device Server (NETRS232), Black

  • This product do not include user manual, if you need, we will send the pdf file to you.
  • HF2211 is a low-cost serial device server,which function is to realize bidirectional transparent transmission between RS232/RS485/RS422 and WiFi/Ethernet..
  • Support RS232/RS422/RS485 to Ethernet/Wi-Fi Conversion, Serial Speed Upto 460800 bps.
  • MIPS MCU with 4MB Flash and 8MB SRAM. Run on eCos.
Check Stock

Captain America: Symbol Of Truth (2022-) #1

  • 6-INCH SCALE COLLECTIBLE MCU 2-PACK: Fans, collectors, and kids alike can enjoy this 2-Pack of 6-inch scale Captain America figures, inspired by the Marvel Cinematic Universe!.
  • INSPIRED BY THE MARVEL CINEMATIC UNIVERSE: These Captain America 2-Pack figures feature premium MCU-inspired design, detail, and articulation for posing and display in your Marvel collection.
  • SENTINELS OF LIBERTY: This Captain America 2-Pack features Steve Rogers from Marvel Studios’ Avengers Endgame, and Sam Wilson from Marvel Studios’ Falcon & the Winter Soldier on Disney+!.
  • PREMIUM ACCESSORIES: This Marvel Legends Series Captain America 2-Pack figures feature multiple MCU-inspired accessories, including shields, alternate heads, and fists!.
  • MARVEL UNIVERSE IN 6-INCH SCALE: Look for other Marvel Legends action figures inspired by the Marvel Cinematic Universe, including the Winter Soldier, Vision, and Scarlet Witch! (Additional figures each sold separately. Subject to availability.).
Check Stock

Alone in This (You Have Me)

  • 6-INCH SCALE COLLECTIBLE MCU 2-PACK: Fans, collectors, and kids alike can enjoy this 2-Pack of 6-inch scale Captain America figures, inspired by the Marvel Cinematic Universe!.
  • INSPIRED BY THE MARVEL CINEMATIC UNIVERSE: These Captain America 2-Pack figures feature premium MCU-inspired design, detail, and articulation for posing and display in your Marvel collection.
  • SENTINELS OF LIBERTY: This Captain America 2-Pack features Steve Rogers from Marvel Studios’ Avengers Endgame, and Sam Wilson from Marvel Studios’ Falcon & the Winter Soldier on Disney+!.
  • PREMIUM ACCESSORIES: This Marvel Legends Series Captain America 2-Pack figures feature multiple MCU-inspired accessories, including shields, alternate heads, and fists!.
  • MARVEL UNIVERSE IN 6-INCH SCALE: Look for other Marvel Legends action figures inspired by the Marvel Cinematic Universe, including the Winter Soldier, Vision, and Scarlet Witch! (Additional figures each sold separately. Subject to availability.).
Check Stock

EPOMAKER GK61X RGB Hotswap Custom DIY Kit for 60% Keyboard, PCB Mounting Plate Case (GK61X Black)

  • ... RGB SMD light. More than 16.8 million lights are available. It’s more than a keyboard but also a fun toy.
  • Fully Programmable. Custom is not just a word. We make it true. Here you have more than 6 driver settings. Simply download the driver and you will be able to program the backlight and macro settings. Built-in flash memory can save the setting at offline mode, never afraid of losing it.
  • Professional 60% Keyboard. GK61X is 60% layout PCB, widely compatible with most of 60% keyboard case, you could change the case as you wish. The chipset is 32 Bit MCU + 8M Flash on-board memory, and 3 pieces independent 256*256*256 RGB color management chip.
  • All-in-One Kit. GK61X got all you need for a custom keyboard: PCB, mounting plate, black ABS case, stabilizers, Type-C cable. More than that, you even got the music-driven motion effects! In this mode, the backlit will blinks with the music, cool and interesting.
Check Stock

Marvel Legends Series Winter Soldier 6-inch Falcon & The Winter Soldier Disney+ Action Figure Toy 5 Accessories

  • 6-INCH SCALE COLLECTIBLE MCU FIGURE: Fans, collectors, and kids alike can enjoy this 6-inch-scale Winter Soldier figure, inspired by Marvel Studios’....
  • INSPIRED BY THE MARVEL CINEMATIC UNIVERSE: This Winter Soldier figure features premium MCU-inspired design, detail, and articulation for posing and....
  • FLASHBACK BUCKY: Bucky Barnes’ brainwashed former self returns to haunt his dreams! Own the 6-inch Winter Soldier inspired by the flashback from....
  • PREMIUM ARTICULATION AND ACCESSORIES: This Marvel Legends Series Winter Soldier figure features multiple points of articulation and MCU-inspired....
  • MARVEL UNIVERSE IN 6-INCH SCALE: Look for other Marvel Legends action figures inspired by Marvel Studios on Disney+, including The Vision, Scarlet....
Check Stock

GK61 GK61x RGB Hot Swap Independent Driver Tyce-C ANSI Replacable Space Cherry MX Switches Mechanical Keyboard DIY Kit Case Plate PCB

  • Package Included:Case + Feet + Screws + GK61 Hot Swap PCB + Alu Plate + USB Cable + Switch Removal Tool.
  • Pls note:The PCB is fully programmable with GK software,the Fn key is the last key at the bottom and can't change place..
  • The chipset is MCU 32 bit,8M Flash,3 pcs 256*256*256 RGB drive to support full 16.8 million RGB..
  • PCB has RGB presoldered,it's under per switch.PCB RGB can support by music..
  • There is no switches in the kit,you can order Cherry Gateron Kailh SMD Box switches etc yourself.Just put in switches in PCB is ok,no need soldering again..
Check Stock

Eallpha Rechargeable aa Batteries, aa Lithium Rechargeable Batteries and Fast Charging USB Rechargeable aa Batteries, aa Batteries USB Rechargeable with Powerful Output 3000mWh, 1200+ Cycles

  • ...ppliances. Make your devices powerful all the way..
  • [Fast Charge Capability]: Fully charged usb rechargeable aa batteries within 2 hours. No need special charger. Any device with USB output charges the battery set anytime you want. Bulit-in smart chip aovids overcharge and overdischarge. Safe enough. Green Indicator flash=Charging.
  • [Easy Use Style]: Pure plug and play feature. Standard size and special charger free make it safe and Simple in charge and discharge. Offer variant voltage output for low capacity reminder and longer working hour compared to constant voltage one..
  • [Long Lifespan and Environment Friendly]: 1200+ full charge to discharge complete cycles and environment friendly. Each single battery adopts high quality lithium cell and smart MCU chip. Free of overcharge, overdischarge, overcurrent, short and overheat and long lasting..
  • [Various Application]: Suitable for high power consumption devices like game consoles, lights, toy guns, shavers, bubble machines, remote controls and other controllers that use AA size battery..
  • Note: In some high power appliances like torches and Flash, if the current and temperature are higher beyond the battery healthy, safety and lifespan, it will automatically lower the performance o....
Check Stock

3D Printer Control Board Back EMF Protection Powerful 520Kb RAM USB Update Firmware ESP32 3D Printer Motherboard with WiFi for Serial Screen

  • SUPPORT VARIOUS SCREEN: This is a 3D printer main control board with onboard ESP32 wifi, supports for Marlin2.0 firmware, in addition to ordinary....
  • 32 BIT MICROPROCESSOR: Built in ESP32 DOWD V3 chip, for Xtensa dual core 32 bit LX6 microprocessor, supporting clock frequency up to 240MHz.
  • POWERFUL AND VERSATILE: The main board adopt ESP32 WROOM 32U module, embedded dual core 32 bit high speed MCU, the clock is up to 240MHz. And....
  • 8M BYTE CHIP: In addition, the module has a built in 8M byte Flash memory chip, which provides effective protection for more application scenarios.
  • BACK EMF PROTECTION: VEXP has designed a protection circuit for the back EMF generated by the stepper motor, which greatly reduces the damage to the....
Check Stock